Lessons from Białowieża Forest on the history of protection and the world's first reintroduction of a large carnivore

Understanding how the relationships between large carnivores and humans have evolved and have been managed through centuries can provide relevant insights for wildlife conservation. The management history of many large carnivores has followed a similar pattern, from game reserved for nobility, to persecuted pests, to conservation targets. We reconstructed the history of brown bear (Ursus arctos) management in Bia?owie?a Forest (Poland and Belarus) based on a detailed survey of historical literature and Russian archives. From the end of the Middle Ages to the end of 18th century, the brown bear was considered “animalia superiora” (i.e., game exclusively reserved for nobility and protected by law). Bears, also a source of public entertainment, were not regarded as a threat. Effective measures to prevent damages to traditional forest beekeeping were already in practice. In the beginning of 19th century, new game‐management approaches allowed most forest officials to hunt bears, which became the primary target of hunters due to their valuable pelt. This, together with an effective anticarnivore policy enhanced by bounties, led to bear extirpation in 1879. Different approaches to scientific game management appeared (planned extermination of predators and hunting levels that would maintain stable populations), as did the first initiatives to protect bears from cruel treatment in captivity. Bear reintroduction in Bia?owie?a Forest began in 1937 and represented the world's first reintroduction of a large carnivore motivated by conservation goals. The outbreak of World War II spoiled what might have been a successful project; reproduction in the wild was documented for 8 years and bear presence for 13. Soft release of cubs born in captivity inside the forest but freely roaming with minimal human contact proved successful. Release of captive human‐habituated bears, feeding of these bears, and a lack of involvement of local communities were weaknesses of the project. Large carnivores are key components of ecosystem‐function restoration, and site‐specific histories provide important lessons in how to preserve them for the future.     

A framework for definition of logical scenarios for safety assurance of automated driving

Abstract

Objective: In order to introduce automated vehicles on public roads, it is necessary to ensure that these vehicles are safe to operate in traffic. One challenge is to prove that all physically possible variations of situations can be handled safely within the operational design domain of the vehicle. A promising approach to handling the set of possible situations is to identify a manageable number of logical scenarios, which provide an abstraction for object properties and behavior within the situations. These can then be transferred into concrete scenarios defining all parameters necessary to reproduce the situation in different test environments.

Methods: This article proposes a framework for defining safety-relevant scenarios based on the potential collision between the subject vehicle and a challenging object, which forces the subject vehicle to depart from its planned course of action to avoid a collision. This allows defining only safety-relevant scenarios, which can directly be related to accident classification. The first criterion for defining a scenario is the area of the subject vehicle with which the object would collide. As a second criterion, 8 different positions around the subject vehicle are considered. To account for other relevant objects in the scenario, factors that influence the challenge for the subject vehicle can be added to the scenario. These are grouped as action constraints, dynamic occlusions, and causal chains.

Results: By applying the proposed systematics, a catalog of base scenarios for a vehicle traveling on controlled-access highways has been generated, which can directly be linked to parameters in accident classification. The catalog serves as a basis for scenario classification within the PEGASUS project.

Conclusions: Defining a limited number of safety-relevant scenarios helps to realize a systematic safety assurance process for automated vehicles. Scenarios are defined based on the point of the potential collision of a challenging object with the subject vehicle and its initial position. This approach allows defining scenarios for different environments and different driving states of the subject vehicle using the same mechanisms. A next step is the generation of logical scenarios for other driving states of the subject vehicle and for other traffic environments.     

Evaluating outcomes of conservation with multidimensional indicators of well-being

Many conservation interventions are hypothesized to be beneficial for both the environment and people's well-being, but this has rarely been tested rigorously. We examined the effects of adoption or nonadoption of a conservation intervention on 3 dimensions of people's well-being (material, relational, and subjective) over time. We focused on a fisheries bycatch management initiative intended to reduce environmental externalities associated with resource extraction. We collected panel data from fishers (n = 250) in villages with (adopters and nonadopters) and without (control) the conservation intervention 3 times over 2 years. We found no evidence that adoption reduced any of the 3 dimensions of well-being in the local populations affected by the intervention. There were modest improvements in material (t = –1.58) and subjective livelihood well-being (p = 0.04) for adopters relative to nonadopters over time. The variations in well-being experiences (in terms of magnitude of change) among adopters, nonadopters, and controls across the different domains over time affirmed the dynamic and social nature of well-being.     

High efficiency chlorine removal from polyvinyl chloride (PVC) pyrolysis with a gas–liquid fluidized bed reactor

In this research a gas–liquid fluidized bed reactor was developed for removing chlorine (Cl) from polyvinyl chloride (PVC) to favor its pyrolysis treatment. In order to efficiently remove Cl within a limited time before extensive generation of hydrocarbon products, the gas–liquid fluidized bed reactor was running at 280–320 °C, where hot N₂ was used as fluidizing gas to fluidize the molten polymer, letting the molten polymer contact well with N₂ to release Cl in form of HCl. Experimental results showed that dechlorination efficiency is mainly temperature dependent and 300 °C is a proper reaction temperature for efficient dechlorination within a limited time duration and for prevention of extensive pyrolysis; under this temperature 99.5% of Cl removal efficiency can be obtained within reaction time around 1 min after melting is completed as the flow rate of N₂ gas was set around 0.47–0.85 Nm³ kg^?1 for the molten PVC. Larger N₂ flow rate and additives in PVC would enhance HCl release but did not change the final dechlorination efficiency; and excessive N₂ flow rate should be avoided for prevention of polymer entrainment. HCl is emitted from PVC granules or scraps at the mean time they started to melt and the melting stage should be taken into consideration when design the gas–liquid fluidized bed reactor for dechlorination.     

Numerical simulation of landfill aeration using computational fluid dynamics

The present study is an application of Computational Fluid Dynamics (CFD) to the numerical simulation of landfill aeration systems. Specifically, the CFD algorithms provided by the commercial solver ANSYS Fluent 14.0, combined with an in-house source code developed to modify the main solver, were used. The unsaturated multiphase flow of air and liquid phases and the biochemical processes for aerobic biodegradation of the organic fraction of municipal solid waste were simulated taking into consideration their temporal and spatial evolution, as well as complex effects, such as oxygen mass transfer across phases, unsaturated flow effects (capillary suction and unsaturated hydraulic conductivity), temperature variations due to biochemical processes and environmental correction factors for the applied kinetics (Monod and 1st order kinetics). The developed model results were compared with literature experimental data. Also, pilot scale simulations and sensitivity analysis were implemented. Moreover, simulation results of a hypothetical single aeration well were shown, while its zone of influence was estimated using both the pressure and oxygen distribution. Finally, a case study was simulated for a hypothetical landfill aeration system. Both a static (steadily positive or negative relative pressure with time) and a hybrid (following a square wave pattern of positive and negative values of relative pressure with time) scenarios for the aeration wells were examined. The results showed that the present model is capable of simulating landfill aeration and the obtained results were in good agreement with corresponding previous experimental and numerical investigations.     

Influence of aeration modes on leachate characteristic of landfills that adopt the aerobic–anaerobic landfill method

As far as the optimal design, operation, and field application of the Aerobic–Anaerobic Landfill Method (AALM) are concerned, it is very important to understand how aeration modes (different combinations of aeration depth and air injection rate) affect the biodegradation of organic carbon and the transformation of nitrogen in landfill solid waste. Pilot-scale lysimeter experiments were carried out under different aeration modes to obtain detailed information regarding the influence of aeration modes on leachate characteristics. Results from these lysimeter experiments revealed that aeration at the bottom layer was the most effective for decomposition of organic carbon when compared with aeration at the surface or middle layers. Moreover, the air injection rate led to different nitrogen transformation patterns, unlike the lesser influence it has on organic carbon decomposition. Effective simultaneous nitrification and denitrification were observed for the aeration mode with a higher air injection rate (=1.0 L/min). On the other hand, the phenomenon of sequenced nitrification and denitrification could be observed when a low air injection rate (=0.5 L/min.) was employed. Finally, it is concluded that, for AALM, air injection with a higher air injection rate at the deepest layer near the leachate collection pipe tends to accelerate the stabilization of landfill waste as defined in terms of the enhancement of denitrification as well as organic carbon decomposition.     

Rapid estimation of compost enzymatic activity by spectral analysis method combined with machine learning

The aim of this study was to investigate the feasibility of using visible near-infrared (VisNIR) diffuse reflectance spectroscopy (DRS) as an easy, inexpensive, and rapid method to predict compost enzymatic activity, which traditionally measured by fluorescein diacetate hydrolysis (FDA-HR) assay. Compost samples representative of five different compost facilities were scanned by DRS, and the raw reflectance spectra were preprocessed using seven spectral transformations for predicting compost FDA-HR with six multivariate algorithms. Although principal component analysis for all spectral pretreatments satisfactorily identified the clusters by compost types, it could not separate different FDA contents. Furthermore, the artificial neural network multilayer perceptron (residual prediction deviation = 3.2, validation r² = 0.91 and RMSE = 13.38 μg g^?1 h^?1) outperformed other multivariate models to capture the highly non-linear relationships between compost enzymatic activity and VisNIR reflectance spectra after Savitzky–Golay first derivative pretreatment. This work demonstrates the efficiency of VisNIR DRS for predicting compost enzymatic as well as microbial activity.     

Conservation impacts of commercial cultivation of endangered and overharvested plants

Overharvesting is one of the greatest threats to species survival. Farming overharvested species is a conservation strategy that can meet growing market demand and conserve wild populations of the target species. This strategy is compatible with the international community's desire to uphold the right of local communities to use biological resources to support their livelihoods. However, studies investigating whether farming can alleviate poaching pressure have focused almost exclusively on animals. To address the shortfall in plant-focused studies, we compiled information on commercial cultivation of threatened plants to assess its conservation benefits. Because China's rising middle class has rapidly intensified demand for wildlife products, we searched the scientific literature published in Chinese (China National Knowledge Infrastructure and Baidu) and in English. We found 32 reports that contained data on 193 internationally or nationally threatened plant species that were under commercial cultivation. These reports showed that cultivations of 82% of the 193 species were sustained by collecting whole plants from the wild periodically or continuously. Although based on a small sample size, species that were maintained in cultivation only through artificial propagation or seeds collected in the wild were likely associated with a reported reduction in wild harvesting of whole plants. Even so, results of correlation analyses suggested that production system, scale, and when a species began being cultivated had little effect on conservation status of the species, either globally or in China. However, species brought into cultivation relatively recently and on a smaller scale were more likely to have undergone a reduction in collecting pressure. Farming of nonmedicinal plants was most problematic for species conservation because wild plants were laundered (i.e., sold as cultivated plants). For effective conservation, policy to guide cultivation operations based on the target species’ biological characteristics, cultural significance, market demand, and conservation status is needed.     

Measuring the impact of the pet trade on Indonesian birds

The trade in wild animals involves one‐third of the world's bird species and thousands of other vertebrate species. Although a few species are imperiled as a result of the wildlife trade, the lack of field studies makes it difficult to gauge how serious a threat it is to biodiversity. We used data on changes in bird abundances across space and time and information from trapper interviews to evaluate the effects of trapping wild birds for the pet trade in Sumatra, Indonesia. To analyze changes in bird abundance over time, we used data gathered over 14 years of repeated bird surveys in a 900‐ha forest in southern Sumatra. In northern Sumatra, we surveyed birds along a gradient of trapping accessibility, from the edge of roads to 5 km into the forest interior. We interviewed 49 bird trappers in northern Sumatra to learn which species they targeted and how far they went into the forest to trap. We used prices from Sumatran bird markets as a proxy for demand and, therefore, trapping pressure. Market price was a significant predictor of species declines over time in southern Sumatra (e.g., given a market price increase of approximately $50, the log change in abundance per year decreased by 0.06 on average). This result indicates a link between the market‐based pet trade and community‐wide species declines. In northern Sumatra, price and change in abundance were not related to remoteness (distance from the nearest road). However, based on our field surveys, high‐value species were rare or absent across this region. The median maximum distance trappers went into the forest each day was 5.0 km. This suggests that trapping has depleted bird populations across our remoteness gradient. We found that less than half of Sumatra's remaining forests are >5 km from a major road. Our results suggest that trapping for the pet trade threatens birds in Sumatra. Given the popularity of pet birds across Southeast Asia, additional studies are urgently needed to determine the extent and magnitude of the threat posed by the pet trade.