钢铁企业含铁尘泥处理与利用工艺

介绍钢铁企业含铁尘泥的处理、利用工艺及其特点,提出含铁尘泥利用应采取必要的均质化和除杂工艺,并尽可能缩短其处理流程,发挥含铁尘泥的最大利用价值。     

氯化钠和二氧化硅对过硫酸铵热稳定性的影响

采用绝热加速量热仪（ARC）对分析纯过硫酸铵、含10%氯化钠杂质的过硫酸铵以及含10%二氧化硅杂质的过硫酸铵进行热分析实验,得到了实验过程中温度、温升速率和压力等数据,计算了3组样品的反应动力学参数,引入热惰性因子对实验数据进行修正,得到了3组样品在严格绝热条件下的热危险性参数,分析了3组样品的反应过程和热危险性。通过Semenov理论计算了3组样品的自加速分解温度（SADT）。结果表明,过硫酸铵加入氯化钠或二氧化硅杂质后,热危险性增大,自加速分解温度降低,更容易发生反应且反应更剧烈。     

Effect of salt solution treatment on impurity removal: A case study on phosphogypsum

This study gives a brief demonstration of impurity removal efficiency upon salt solution treatment of phosphogypsum (PG). The experimental set up has been designed according to a multi-variable Box–Behnken Design (BBD) with stirring time, solid: liquid (PG:salt solution) ratio and temperature as the conducted in various salt solutions. PG sample has been treated with sea water, 5% NaCl and 10% NaCl solutions according to the BBD matrix. Fluoride (F), copper (Cu), manganese (Mn), and nickel (Ni) amounts in the PG sample have been measured upon pre- and post-treatment with salt solutions. Among other operating conditions, temperature has been the dominant factor on fluoride removal efficiency, and responses for the factors determined in the experiment runs indicated that a significant correlation could be established between temperature and fluoride removal, sea water being the most efficient salt solution. Higher copper, manganese, and nickel removal efficiencies have been observed in single salt NaCl solution systems however no significant correlation could be established between factors. Results indicate that pre-treatment of PG located near coastal regions with sea water can be a cost-effective approach and applicable on industrial scale when fluoride removal is of importance.     

Identification of impurities in technical monocrotophos

A number of impurities present in technical monocrotophos (76%) were isolated by column chromatography and structures were assigned by GC‐MS analysis.