Characterization of fulvic acids during olive mill waste composting (Elemental,Thermal and fluorescence analyses)

Elemental analysis, fluorescence spectroscopy and differential scanning calorimetry (DSC) were applied to the study of fulvic acids isolated from different stages during olive mill waste composting. The fulvic extracted acids are characterized by a high nitrogen content and O/C ratio values that may result from the high degree of humification and the synthesis of more condensed humic complexes. This was confirmed by fluorescence spectroscopy in the synchronous-scan mode by the decrease of shoulder intensities at intermediate wavelengths indicating the increase of polycondensation and conjugation of unsaturated structures and the greater uniformity of fluorophores. Fluorescence spectra in the emission, excitation and synchronous modes became simpler with compost maturation. This was confirmed by DSC results which proved the high degree of polycondensation of aromatic nuclei of fulvic acid molecules during olive mill waste composting.     

Application and mechanism of polysaccharide extracted from Enteromorpha to remove nano-ZnO and humic acid in coagulation process

Green source Ep was extracted from marine alga waste. The molecule model structure of Ep was studied and constructed. PAC-Ep coagulation system improves the efficiency of removal efficiency. Synergistic effects between NPs and HA make a big difference to enhance efficiency. Mechanism is charge neutralization, hydrogen bonding and adsorbing-complexing Enteromorpha polysaccharide (Ep) extracted from alga a novel green coagulant aid for nanoparticles (NPs) and heavy metal ions removal and the structure of EP was intensively studied in this study. The integration of Ep with polyaluminum chloride (PAC-Ep) coagulants exhibited higher coagulation performance than that of the polyaluminum chloride (PAC) because of the negatively charged NPs suspension and humic aid (HA) solution. Significant high removal efficiencies of dissolved organic matter (94.1%), turbidity (99.3%) and Zn ions (69.3%) were achieved by the PAC-Ep coagulants. The dual-coagulation properties of PAC-Ep for different pollutants was based on multiple mechanisms, including (i) Al³⁺ charge neutralization; (ii) hydroxy aluminum hydroxyl bridging formed polynuclearhydroxy complexes bridge and sweep colloidal particles; (iii) adsorption and bridging of Ep chain for the NPs and heavy metal ions. Results indicated that the destabilization of colloid was induced by the coexisting HA and higher removal was achieved as ions adsorption was enhance in the presence of HA complexation. On the basis of that, the extraction of polysaccharide is a promising candidate for its high coagulation performance in water treatment.     

石化企业VOCs无组织排放源强的反演模拟

针对石化行业面源无组织排放VOCs难以准确定量的问题,建立了基于开路式傅里叶变换红外光谱技术(OP-FTIR)的面源污染源源强反演模型,并进行了现场模拟试验。试验结果表明,风向、风速、大气稳定度、监测距离、数据处理周期等都是影响反演模型准确性的重要灵敏度参数。以反演源强Q_P与实际排放量Q的比值(Q_P/Q)为量化指标,对各影响因素进行优化处理,确定了构建反演模型适用的边界条件。当各灵敏度参数稳定于适用边界条件之内时,Q_P/Q为0.85~0.90。     

Analytical Study of the Heat Loss Attenuation by Clothing on Thermal Manikins Under Radiative Heat Loads

For wearers of protective clothing in radiation environments there are no quantitative guidelines available for the effect of a radiative heat load on heat exchange. Under the European Union funded project ThermProtect an analytical effort was defined to address the issue of radiative heat load while wearing protective clothing. As within the ThermProtect project much information has become available from thermal manikin experiments in thermal radiation environments, these sets of experimental data are used to verify the analytical approach. The analytical approach provided a good prediction of the heat loss in the manikin experiments, 95% of the variance was explained by the model. The model has not yet been validated at high radiative heat loads and neglects some physical properties of the radiation emissivity. Still, the analytical approach provides a pragmatic approach and may be useful for practical implementation in protective clothing standards for moderate thermal radiation environments.     

高效絮凝剂制备的前期浸取研究

我国油田多采用絮凝剂处理含油污水。为得到高效、廉价的絮凝剂,使用赤泥最优化制备聚合氯化铝铁。通过化学分析法和X射线衍射分析,得出赤泥中铝﹑铁元素含量。正交实验结果表明:影响Fe溶出的因素由强到弱依次为盐酸用量系数﹑反应温度﹑目数和反应时间,最佳浸出条件为目数80～120、液固比5.5、反应温度95℃、反应时间3.5h。     

氯化对二级处理出水中溶解性有机物结构的影响

以哈尔滨市W污水处理厂污水为研究对象,利用XAD树脂对二级处理出水中的溶解性有机物(DOM)进行分级分离.按照DOM在不同树脂上的吸附特性将其分为5个部分:疏水性有机酸(HPO-A)、疏水性中性有机物(HPO-N)、过渡亲水性有机酸(TPI-A)、过渡亲水性中性有机物(TPI-N)和亲水性有机物(HPI).考察了二级处理出水中有机组分的组成分布、三卤甲烷生成势、紫外光谱和红外光谱.结果表明,二级处理出水中的主要成分是HPO-A和HPI,两者含量之和达70.8%.HPO-A是加氯消毒时产生三卤甲烷的主要有机组分,其三卤甲烷生成活性(STHMFP)为232.9μg/mg.而HPO-N、TPI-A、TPI-N和HPI的STHMFP介于100～125μg/mg之间.氯化反应后,HPO-A、HPO-N、TPI-A和HPI的紫外-可见吸光度均降低,而TPI-N则相反.并且HPO-A、HPO-N、TPI-A和TPI-N中的O-H、C=C和苯环的含量降低,而C-O的含量升高,还生成了C=O和C-Cl.     

Characterization of humic acids extracted from the sediments of the various rivers and lakes in China

The humic acids (HAs) isolated from the sediments of the various rivers,lakes,and reservoirs in China were studied using elemental analyzer,fourier transform infrared (FT-IR),and CP/MAS 13C nuclear magnetic resonance (NMR) spectroscopy.The results showed that the HAs were characterized by some common chemical and physicochemical properties,but they also pose some differences in the C-containing functional groups.The C/N,C/H,O/C,and O/H ratios differ widely for the various HAs,showing that the elemental comp...     

土壤中矿物油含量测定方法研究

建立了土壤中矿物油含量的分析方法。采集的土壤鲜样,采用无水硫酸钠进行化学干燥。用四氯化碳提取土壤中的油类物质,采用硅酸镁去除提取液中的动植物油等极性化合物后,使用红外分光测油仪测定提取液中的矿物油含量。此方法具有良好的线性关系,相关系数在0.9999以上。测定下限为1.85 mg/l,测定上限为100 mg/l,测量范围为9 mg/kg～500 mg/kg,方法的灵敏度为1.05。试剂空白加标回收率56%～83%,实际样品加标回收率在69%～74%之间。该法简便快速,灵敏准确,具有广泛的应用前景。     

不同面源强度影响下城市河流溶解性有机质光谱特征变化

采用紫外-可见吸收光谱（UV-vis）和三维荧光光谱结合平行因子法（EEMs-PARAFAC）研究两条面源输入强度不同的城市河流春夏两季水体中溶解性有机质（DOM）含量和组成变化.结果表明,两条河流夏季水体DOM腐殖化程度和相对分子质量均显著高于春季（P<0.01）. PARAFAC模型共解析出C1（UVC类富里酸）、 C2（类色氨酸）、 C3（类胡敏酸）和C4（UVA类富里酸）这4个化学组分,C1[（31±6）%]和C2[（31±4）%]为水体DOM中主要荧光组分.高面源输入水平的河流春季各组分荧光强度均低于夏季,而低面源输入水平的河流与之相反.随机森林回归模型表明,C3%对河流水质变化敏感度最高（R²=0.75,P<0.001）,具有很好的指示作用;水面覆盖率（Cover）对C4%有显著预测重要性（P<0.001）, C4%易受光化学氧化作用影响.主成分分析（PCA）和Adonis检验表明,氮和磷为水体自生源过程的重要推动力,面源输入强度和季节变化对城市河流水体状况有显著影响（R²=0.775,P<0.001）.城...     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.