消能减震技术用于C类框架学校建筑提高一度抗震设防加固的探讨

针对既有的C类框架学校建筑提高一度抗震设防的加固目标,从地震作用计算、结构抗震验算和抗震构造措施等方面详细分析了其中的加固难点,指出了应用传统抗震加固方法的一些不足之处,探讨了应用消能减震技术进行结构提高一度抗震设防加固的可行性;并以某C类框架学校建筑加固工程为实例,从减震控制效果分析、弹塑性变形验算、消能部件影响评价、抗震构造措施核查4个方面论证了消能减震加固方法的有效性和可操作性。结果表明,消能减震技术在C类框架学校建筑抗震加固中具有一定的应用优势,不但能有效控制结构的地震响应,而且依据减震效果可以适当降低结构的抗震构造要求。因此,只要通过合理的消能减震加固设计,再辅以额外的局部加强处理,完全可以实现C类框架学校建筑提高一度抗震设防的加固目标需求。     

混凝土大坝震害评估模型的研究及对黄河上游大坝的分析

利用前人所编的历代(共四代)地震烈度(地震动)区划图,组合叠加后得到一个综合烈度(地震动)。这种叠加是一个集成的专家系统综合认识结果,以此作为坝体可能遭受地震破坏危险的因素。初步研究建立了混凝土大坝震害评估模型,此模型是考虑了坝体的结构类型、建设年代、使用现状、场地条件、抗震设防水平等因素,用逐步线性拟合方法进行回归分析得到的。用此模型对汶川地震破坏的坝体进行了实例分析,分析结果比较符合实际。最后,用这个模型对黄河上游10座重点混凝土大坝做了震害评估分析。     

中美贸易与污染避难所假说的实证研究——基于内含污染的视角

使用非竞争型投入产出表,在考虑中间产品产生污染的情况下,通过计算中美双边贸易的内含污染,考察对外贸易对发达国家和发展中国家环境的影响,检验污染避难所假说是否成立.本文首先构造中美两国28个制造业的总污染强度,在此基础上计算1987-2004年中美制造业贸易的贸易内含污染条件指标,并分析中美制造业贸易的进出口内含污染的部门来源.研究发现,1992年之后,所有污染物的贸易内含污染条件值都大于1,这意味着美国从中国进口的污染强度要高于中国从美国的进口污染强度,中美双边贸易中,中国环境受损、美国环境获利,污染避难所假说成立.从部门结构上看,中国出口内含污染主要来源于塑料制品、机械设备和工业化学这三个部门,进口内含污染主要来源于工业化学、机械设备和交通设备这三个部门.     

自主研发、技术引进与能源消耗强度——基于中国工业行业的实证分析

本文运用1998-2007年中国工业32个行业面板数据,将工业各行业研发总支出划分为自主研发、国外技术引进和国内技术转移三个部分,在估算自主研发存量和技术引进存量的基础上,研究了自主研发、技术引进对工业能源消耗强度的影响,并考察了能源相对价格、FDI的进入程度以及工业内部行业结构等因素.研究表明,自主研发和国外技术引进对能源强度的影响存在行业差异.自主研发对全工业行业和高能源强度行业的能源强度有显著负效应,对低能源强度行业的影响不显著;国内技术转移对全工业行业和低能源强度行业的能源强度有显著负的影响,对高能源强度行业的影响不显著;国外技术引进在所有样本中对能源强度的影响均不显著.研究还发现,在低能源强度行业中,自主研发并没有与国外技术引进互为补充共同促进能源强度的下降;在高、低能源强度行业样本中,自主研发没有与国内技术转移形成互补优势,有助于能源强度的下降.     

中国碳排放强度与煤炭消耗的冲击效应分析

受能源消费结构的影响,煤炭作为我国经济发展的资源支柱,一方面推动着经济快速增长,另一方面也对中国节能减排、降低碳排放强度提出了挑战,因而准确认识碳排放强度与煤炭消耗之间的交互冲击作用机理,为挖掘碳减排路径提供了科学依据.本文选取1990 - 2008年间中国碳排放强度与煤炭消耗指标,采用EG协整检验证明碳排放强度与煤炭消耗之间存在长期稳定关系,并以此建立VAR模型和脉冲响应函数,考察碳排放强度与煤炭消耗之间的长期动态影响特征.冲击响应分析结果表明:(1)煤炭消耗比重的变化对碳排放强度的冲击影晌具有一定滞后性和波动性,但冲击作用长期持久;(2)碳排放强度对煤炭消耗比重的冲击影响在短期内较剧烈,但长期冲击影响不明显;(3)煤炭消耗比重的降低在长期内会促使碳排放强度的降低,因而可以通过降低煤炭消耗比重来达到降低碳排放强度的目的.最后,从结构性降低、产业传导性降低以及技术性降低等角度,提出减少煤炭消耗、降低碳排放强度的相关对策措施.     

Rain‐washing of foliar deposits of Dimilin®WP‐25 formulated in four different carrier liquids

Abstract

Dimilin^® WP‐25, a wettable powder formulation of diflubenzuron (DFB) [1‐(4‐chlorophenyl)‐3‐(2,6‐difluorobenzoyl) urea], was formulated in four different carrier liquids, viz., water; a light petroleum paraffinic oil, ID 585; a heavy paraffinic oil, Sunspray^® 7N; and a 1:2 mixture of a light petroleum aromatic solvent (Cyclosol^® 63) and canola oil; to provide four end‐use mixtures, Dim‐W, Dim‐585, Dim‐7N and Dim‐Cy‐C respectively, each containing 28 g of DFB per litre. Balsam fir branch tips clipped from greenhouse‐grown seedlings, and sugar maple branch tips clipped from field‐grown young trees, were exposed to uniform‐sized droplets (ranging in diameters from 135 to 190 μm) of the four end‐use mixtures which were atomized using a monodispersed droplet generator. Droplets were collected on the fir and maple branch tips and the initial residue per g fresh weight of foliage was determined by high‐performance liquid chromatography (HPLC). The branch tips were exposed to cumulative rainfall of 3, 6 and 10 mm at an intensity of 5 mm/h and at time intervals of 1, 12, 36 and 72 h after DFB treatment, to test the influence of ‘ageing’ of foliar residues on rainfastness. Foliar samples were collected for residue determination just before the onset of rainfall, and at 0.5 h post‐rain. DFB was quantified by the HPLC method. In the case of fir foliage, the Dim‐W formulation was the most susceptible to rain‐washing and the rainfastness did not increase with the ageing period of foliar deposits. In contrast, the three oil‐based mixtures showed greater rainfastness depending upon the carrier liquid and the ageing period. Rainfastness decreased in the order of Dim‐Cy‐C > Dim‐7N > Dim‐585 > Dim‐W. In contrast, the data on maple foliage indicated that the ageing of deposits increased the rainfastness of all the 4 end‐use mixtures. Dim‐585 was the most susceptible to rain washing, and rainfastness decreased in the order of Dim‐W > Dim‐Cy‐C > Dim‐7N > Dim‐585.     

伊朗加恩—贝尔兼德地震结构震害概述

对１９９７年５月１０日伊朗东部加恩－贝尔兼德地震中出现的几类结构的震害现象进行了初步的描述与分析,同时,就经抗震设防与未防抗震设防结构的震害现明作了对比。对震区重建及附近地区新建结构抗震问题的解决有一定的参考意义。     

Hermaphrodite sex role preferences: the role of partner body size, mating history and female fitness in the sea slug Chelidonura sandrana

Costs and benefits associated with matings and the effects of mating frequency on fitness commonly differ between the sexes. As a result, outcrossing simultaneous hermaphrodites may prefer to copulate in the more rewarding sex role, generating conflicts over sperm donation and sperm receipt between mates. Because recent sex role preference models remain controversial, we contrast here some of their assumptions and predictions in the sea slug Chelidonura sandrana. For this hermaphrodite with sperm storage and internal fertilisation, risk-averse models assume that fitness pay-offs are constantly higher in the female than in the male function in any single mating. Moreover, excluding mutual partner assessment, these models predict male mating behaviour to be independent of receiver traits. The competing gender ratio hypothesis assumes that relative fitness pay-offs, and thus the preferred mating roles, vary and may reverse between matings and predicts that ejaculation strategies co-vary with receiver quality. We found that field mating rates of C. sandrana substantially exceeded what is required to maintain female fertility and fecundity, indicating large variation in direct female benefits between matings. We further demonstrate that male copulation duration adaptively increased with partner body size (i.e. fecundity) but decreased with recent partner promiscuity. These findings are compatible with the gender ratio hypothesis but contradict risk-averse models.     

长江三角洲及其附近地区两千年来水灾的研究

通过对长江三角洲及其附近地区两千年来水灾生成频率和强度的分析。认为两晋、南北朝时期和南宋、元、明、清时期是两千年来本区的主要水灾期。对照两千年来中国东部气候变化、海面升降与长江口河道变迁关系,认为在本区水灾生成事件中,气候因素起着主导控制作用。当然,人类活动对本区水灾生成的影响也不容忽视。本地区近百年来的旱涝灾害规律可用非线性科学的方法进行研究,旱涝灾害的准60年、准35年和准11年的长周期变化与地球自转速度、地极移动和太阳黑子活动的3个周期变化基本一致。本地区气候系统的行为具有混沌特征。这是线性逼近和周期叠加预报方法难以得出灾害预报正确结果的原因,但气候系统半个月的确定性预测可以实现。     

Determination of turbulent burning velocities of dust air mixtures with the open tube method

Correlating turbulent burning velocity to turbulence intensity and basic flame parameters-like laminar burning velocity for dust air mixtures is not only a scientific challenge but also of practical importance for the modelling of dust flame propagation in industrial facilities and choice of adequate safety strategy. The open tube method has been implemented to measure laminar and turbulent burning velocities at laboratory scale for turbulence intensities in the range of a few m/s. Special care has been given to the experimental technique so that a direct access to the desired parameters was possible minimising interpretation difficulties. In particular, the flame is propagating freely, the flame velocity is directly accessible by visualisation and the turbulence intensity is measured at the flame front during flame propagation with special aerodynamic probes. In the present paper, those achievements are briefly recalled. In addition, a complete set of experiments for diametrically opposed dusts, starch and aluminium, has been performed and is presented hereafter. The experimental data, measured for potato dust air mixtures seem to be in accordance with the Bray Gülder model in the range of 1.5 m/s<u′<3.5 m/s. For a further confirmation, the measurement range has been extended to lower levels of turbulence of u′<1.5 m/s. This could be achieved by changing the mode of preparation of the dust air mixture. In former tests, the particles have been injected into the tube from a pressurised dust reservoir; for the lower turbulence range, the particles have been inserted into the tube from above by means of a sieve–riddler system, and the turbulence generated from the pressurised gas reservoir as before. For higher levels of turbulence, aluminium air mixtures have been investigated using the particle injection mode with pressurised dust reservoir. Due to high burning rates much higher flame speeds than for potato dusts of up to 23 m/s have been obtained.