激光散射技术对絮凝剂分子性能的研究

介绍以激光散射技术对絮凝剂进行的研究。利用激光散射技术实现了对絮凝剂胶体分子粒径、形态结构和粒径分布的精确测量,从而对评价该絮凝剂的沉降性能及有关性能的改进提高起指导作用。     

立式储罐变形评估的三维激光扫描实验

针对常规储罐检测工作量大、效率低的问题,利用三维激光扫描仪对某储罐进行外部检测,获取高精度的储罐三维点云数据,通过建模形成一个拟合罐体,与理想罐体进行3D比较得到储罐变形的整体情况,该方法能够对储罐的变形评估做出准确判断,距离储罐底板0.3 m处有最大径向偏差51.63 mm,0.9 m处有最大倾斜度0.177°,基于三维激光扫描技术为储罐罐壁变形检测提供了一种可靠的新方法。     

激光诱导击穿光谱技术在环境领域中的应用动态

激光诱导击穿光谱技术是一种通过分析物质等离子体发射光谱而获取物质成分和含量的分析技术。近些年,该技术已经成为光谱学领域的研究热点且发展迅速,涌现出多种新的检测手段和仪器。从它的基本原理、发展历史及其在土壤、水和大气等生态环境保护领域的应用情况为基础,分析总结其优点以及所面临的问题和挑战。     

Direct spectral analysis and determination of high content of carcinogenic bromine in bread using UV pulsed laser induced breakdown spectroscopy

Laser induced breakdown spectroscopy (LIBS) was applied for the detection of carcinogenic elements like bromine in four representative brands of loaf bread samples and the measured bromine concentrations were 352, 157, 451, and 311 ppm, using Br I (827.2 nm) atomic transition line as the finger print atomic transition. Our LIBS system is equipped with a pulsed laser of wavelength 266 nm with energy 25 mJ pulse^?1, 8 ns pulse duration, 20 Hz repetition rate, and a gated ICCD camera. The LIBS system was calibrated with the standards of known concentrations in the sample (bread) matrix and such plot is linear in 20–500 ppm range. The capability of our system in terms of limit of detection and relative accuracy with respect to the standard inductively coupled plasma mass spectrometry (ICPMS) technique was evaluated and these values were 5.09 ppm and 0.01–0.05, respectively, which ensures the applicability of our system for Br trace level detection, and LIBS results are in excellent agreement with that of ICPMS results.     

Chlorination-induced cellular damage and recovery in marine microalga, Chlorella salina

Power plants employ chlorination for controlling biofouling in the cooling water system. Phytoplankton drawn into the cooling water system could be impacted by chemical stress induced by the oxidizing biocide. It is likely that microalgae, being sensitive to chlorine, could suffer damage to their cellular structure and function. In this study, we present data on the effect of in-use concentrations of chlorine on the unicellular microalga, Chlorella salina. Chlorophyll autofluorescence was measured in terms of mean fluorescence intensity per cell for rapid assessment of toxicity. Viability of the cells exposed to chlorine was determined by fluorescein diacetate staining. Functionality of the photosynthetic machinery was assessed by gross primary productivity. Results from the study, which combined confocal laser scanning microscopy with image analysis, showed a significant dose-dependant reduction in chlorophyll autofluorescence, esterase activity and gross primary productivity in chlorine-treated cells. Interestingly, the cells injured by chlorination could not recover in terms of autofluorescence, esterase activity or productivity even after 18 h incubation in healthy media. Among the test points evaluated, esterase activity appeared to be sensitive for determining the chlorination-induced impact. Our results demonstrate that low-dose chlorination causes significant decrease in chlorophyll autofluorescence, intracellular esterase activity and primary productivity in Chlorella cells.     

激光表面处理对工业级锆基块体非晶合金弯曲变形和缺口韧性的影响

目的 改善块体非晶合金的弯曲力学性能,同时考虑航空结构材料选材的经济性,研究激光表面处理工艺对工业级Zr_49.7Ti₂Cu_37.8Al₁₀Er_0.5块体非晶合金弯曲变形和缺口韧性的影响规律。方法 采用低纯原料和低真空制备条件获得工业级Zr_49.7Ti₂Cu_37.8Al₁₀Er_0.5块体非晶合金试样,考虑到弯曲条件下试样受到拉伸和压缩2种正应力状态,研究不同处理工艺和激光处理表面对试样弯曲变形和缺口韧性的影响。结果 当激光处理表面位于弯曲试样的2个侧表面时,其对试样的塑性变形能力和断裂强度没有明显的影响,但会显著降低试样的缺口韧性,从(56.4±3.4)MPa·m^1/2降低到(26.2±4.8)MPa·m^1/2;激光处理表面位于弯曲试样的受拉侧时,试样的弯曲断裂强度从2 150 MPa降低到1 800 MPa;当激光处理表面位于...     

He-Ne激光诱变选育高效石油烃降解菌的研究

采用He-Ne激光器对绿针假单胞菌(Pseudomonas chlororaphis)进行激光诱变育种。在激光照射功率10 mW,时间10 min条件下,筛选到一株遗传性状稳定的高效石油烃降解菌PS 2。摇瓶实验发现当培养液中初始柴油含量为0.2%～0.5%(V/V)、温度为30℃左右、pH值为7～8的条件下,突变菌PS 2对石油烃的降解效果最好。在最适生长条件下,突变菌PS 2在120 h内将培养液中的石油烃完全降解且不存在延滞期,比出发菌株少用24 h。结果表明,He-Ne激光诱变育种技术是获得高效石油烃降解菌的有效途径之一。     

机场围界入侵报警系统的设计

结合机场的地域特征,介绍一种检测人入侵行为的设计方案.以激光光电感应作为传感器件,通过对89052单片机进行C语言编程,检测和判断人入侵事件.通过大量实验获取样本时间点,利用聚类分析的算法有效排除掉噪声点,得到可靠样本空间,计算出可信赖样本阈值范围,经实验验证入侵判断误报率符合要求.     

毫米波云雷达与激光云高仪气象探测性能对比分析

为评估毫米波云雷达及激光云高仪的探测性能,选取广州市气象局KA波段毫米波云雷达和激光云高仪云高观测数据,通过对比两种测云设备在相同条件下的差异,分析不同要素对观测设备的影响,结果表明：(1)毫米波云雷达与激光云高仪同时探测到有云时,二者在云底高度观测上吻合程度较高,相关系数为0.98;(2)在数据获取率上,云雷达对高云的探测能力明显优于激光云高仪,但在对低云的探测能力上还有待提高,和激光云高仪相比,云雷达对低云和中云的识别能力有待提高;(3)对于多层云的观测,低层云的遮挡降低了激光云高仪对中高层云的观测,激光云高仪探测的中高层云多数在云雷达的回波内部.(4)对于不同强度的降水,日降水量越多,该天所测得的高、中云层回波就越少.(5)通过边界层高度与污染物的关系分析可以得出,边界层高度与PM2.5浓度呈反比.这些研究能够对毫米波云雷达和激光云高仪的探测能力进行评估,为后续选择设备提供参考,也推动了云观测技术的发展.     

纳秒脉冲激光/纳米金悬浮体系催化降解2,4,5-TCP

以脉冲激光为光源、纳米金为催化剂,对2,4,5-三氯苯酚(2,4,5-TCP)进行了光催化降解研究,测定了其反应动力学参数,确定了该降解体系中2,4,5-三氯苯酚的单位能量降解率和平均反应速率.EDX能谱和透射电镜表征结果表明,已成功制备了纳米金颗粒,形态主要呈球状,粒径分布均匀,大小在15~20 nm之间.以亚甲基蓝为底物对纳米金的光催化性能进行了表征,结果表明,所制备的纳米金具有较好的催化性能,添加纳米金组比对照组的亚甲基蓝脱色率增加了约15.7%.以2,4,5-TCP为底物时,脉冲激光照射40 min,最高催化降解率约为85%,单位能量降解率为0.18256%·J-1,平均反应速率为0.04667 min-1,反应符合准一级动力学方程ln(C0/Ct)=-0.1141+0.04667t.