两类微生物燃料电池治理硝酸盐废水的实验研究

采用二氧化铅阴极单室微生物燃料电池(MFC)和双室MFC,以葡萄糖为唯一电子供体,系统研究了两类微生物燃料电池的产电性能和去除硝酸盐的情况.结果表明,双室MFC闭合后,阳极室降解葡萄糖产生的电子可通过外电路传递到阴极,在生物的作用下,NO3--N得到电子被还原,平均反硝化速率达3.77 mg·L-1·d-1.双室MFC...     

利用PCR-DGGE溯源典型农村塘坝饮用水中的污染

以华南地区典型农村塘坝饮用水为研究对象,采用基于大肠杆菌的两种特异性基因(β-D-葡萄糖苷酶编码基因uidA和膜外周磷通道蛋白编码基因phoE)的群体差异分析(PCR-DGGE),对饮用水中的污染情况进行了溯源研究.结果表明,采用富集培养的混合菌体DNA作为模板扩增大肠杆菌特异性基因更加实用.uidA和phoE的引物均...     

基于卫星遥感与地面监测分析北京大气NO_2污染特征

分析了1999—2010年北京大气NO2地面质量浓度、2004年以来北京及周边NO2柱浓度的变化.结果表明：1999—2007年来北京大气NO2质量浓度以升高为主.2008年实施奥运空气质量保障措施极大地缓解了北京NO2污染状况,地面质量浓度与垂直柱浓度都出现不同程度的回落.2009年北京大气NO2污染又有所反弹,但低...     

LCA of eucalyptus wood charcoal briquettes

This paper sets out to describe the environmental impact assessment for wood charcoal briquettes produced from eucalyptus wood in Brazil, with specific reference to those impacts associated with Global Warming Potential. To achieve that objective, the work was undertaken in accordance with ISO 14040 "Environmental management - Life cycle assessment - Principles and framework" which describes essential LCA characteristics and good practices. Charcoal briquettes are produced from two basic raw materials, charcoal fines and starch. The fines result from the production of charcoal from sustainably managed eucalyptus plantations. Starch is extracted from babaçu pulp in the Amazon region. Multi-output processes were allocated based on income from the different by-products. The results showed that more than 90% of incoming CO₂ was due to biomass production for charcoal, and the remainder to starch biomass production. Based on Brazilian data, as well as information provided by the GaBi4.3 database, it turned out that supplying the energy content of 1 kg of briquettes resulted in the sequestration of 3.9690 kg of CO₂, i.e. around 4 kg of CO₂ per kg of briquettes produced. CO₂ emissions throughout the briquette production process are totally compensated for by the environmental quality of the raw materials used.     

粗粒子气溶胶远距离输送造成华南严重空气污染的分析

2009年4月末,发生了一次罕见的粗粒子气溶胶远距离输送造成华南地区出现严重的空气污染事件,其特征主要是气溶胶质量浓度超标,而能见度没有明显恶化,对这次空气污染事件进行分析的结果表明.在过程中,粗细粒子质量比(PM2.5/PM10)有明显的3次下降,最低达到0.3,即PM2.5仅占PM10的30%,这与珠江三角洲地区通常以细粒子为主的污染特征有很大不同,反映了外来粗粒子的侵入特征.长江流域浮尘天气的沙尘粒子变性后,长距离输送污染物叠加本地污染物,造成这次严重空气污染事件.     

长期暴露于全氟十三酸的青鳉鱼体内分布和生物富集

研究了将青鳉鱼长期暴露于不同浓度的全氟羧酸类物质全氟十三酸(PFTriDA)后的器官分布和富集系数.结果显示, PFTriDA最高富集在性腺;其次是卵、肝脏;浓度最低的部分是残体.除了性腺之外,该器官分布与野生中华鲟的一致.在相同暴露浓度下,雄鱼体内各器官的PFTriDA的含量高于雌鱼,机理模型计算进一步表明高母子传递系数是造成雌雄差异的可能原因.随着PFTriDA暴露浓度的升高,鱼体内同一器官的生物富集系数(BCF)呈现下降趋势.     

基于PPI的河段水体潜在污染研究

提出了一种预报河段水体潜在污染的方法——河段潜在污染指数法(riversection potential pollution index,R-PPI),并在北京市山区3个典型小流域进行应用.河流水体污染是我国目前最为突出的水环境问题,在治理工作开展前需要确定重点污染河段、区域和污染源,而基于河流水质监测的水质评价方法难以确定重点污染源.因此引入了潜在非点源污染指数(potential non-point pollution index,PNPI)法,进行了土地利用类型扩展、土地利用分类比对和土壤渗透性分级3个方面改进,得到潜在污染指数(potential pollution index,PPI),并在此基础上建立了河段潜在污染指数法.通过在3个小流域的应用研究可知,该方法具有所需监测资料少、操作简单、便于确定重点污染源、综合性强等特点,可为流域污染治理提供科学指导.     

碳源变化对降解2,4-D的好氧颗粒污泥性能及形态的影响

在长期运行的序批式生物反应器(SBR)中,考察了以葡萄糖和2,4-二氯苯氧乙酸(2,4-D)为混合碳源培养的好氧颗粒污泥在转换为2,4-D唯一碳源废水后,其形态、结构及对目标污染物去除功能的变化.结果表明,基质转换为2,4-D单一碳源后,好氧颗粒污泥仍保持了对目标污染物高效的去除能力.当进水2,4-D浓度为361～564mg/L,其去除率为99.2%～100%,COD平均去除率达到85.6%.混合碳源向2,4-D单一碳源转换对原好氧颗粒结构产生一定破坏作用,使其发生部分解体,粒径由513μm下降到302μm.但好氧颗粒污泥良好的耐负荷冲击使其保持了颗粒主体,通过一段时间适应调整后能够重新聚集生长,最终获得能够利用2,4-D为唯一碳源生长并具有良好沉降性(SVI20～40mL/g)的好氧颗粒污泥,粒径为489μm.扫描电子显微镜(SEM)观察结果表明,混合碳源转向单一碳源使好氧颗粒生物相丰富度降低.     

Effects of Cu（Ⅱ） and humic acid on atrazine photodegradation

This work was designed to explore the characteristics of photodegradation of herbicides in the copper-polluted water body. The results showed that Cu(II) alone could induce a photo Fenton-like reaction to enhance the degradation of atrazine, in which hydroxyl radical ( OH) was a main active species. Humic acids restrained atrazine degradation, nevertheless, when introducing Cu(II), the photodegradation was accelerated, in which singlet oxygen (1O2) replaced OH acting as the prevailing species. A feasible mechanism for the photochemical process was also proposed, which is helpful for better understanding the environmental photochemistry of atrazine in the copper-polluted water.     

TiO2 nanotubes as solid-phase extraction adsorbent for the determination of polycyclic aromatic hydrocarbons in environmental water samples

An analytical method based on TiO2 nanotubes solid-phase extraction (SPE) combined with gas chromatography (GC) was established for the analysis of seven polycyclic aromatic hydrocarbons (PAHs): acenaphtylene, acenaphthene, anthracene, fluorene, phenanthrene, fluoranthene and pyrene. Factors a ecting the extraction e ciency including the eluent type and its volume, adsorbent amount, sample volume, sample pH and sample flow rate were optimized. The characteristic data of analytical performance were determined to investigate the sensitivity and precision of the method. Under the optimized extraction conditions, the method showed good linearity in the range of 0.01–0.8 g/mL, repeatability of the extraction (RSD were between 6.7% and 13.5%, n = 5) and satisfactory detection limits (0.017–0.059 ng/mL). The developed method was successfully applied to the analysis of surface water (tap, river and dam) samples. The recoveries of PAHs spiked in environmental water samples ranged from 90% to 100%. All the results indicated the potential application of titanate nanotubes as solid-phase extraction adsorbents to pre-treat water samples.