固相萃取-高效液相色谱法测定水中丙烯酰胺研究

采用固相萃取-高效液相色谱法对水中的丙烯酰胺定性、定量分析。结果显示:丙烯酰胺含量在20μg/L~400μg/L之间呈良好线性关系,回归方程Y=0.476 8X+0.845 4,相关系数R为0.997 72,检出限0.1μg/L,样品回收率在71.85%~92.28%之间,相对标准偏差为3.4%~10.9%。该方法减少了有机溶剂用量,缩短了有机溶剂暴露时间,降低污染,且能满足地表水环境质量标准(GB 3838-2002)限值要求,是水中丙烯酰胺含量准确稳定的检测方法。用该方法测定了呼和浩特市引黄入呼左岸、右岸、中浅和中深4个断面水样,均未检出丙烯酰胺。     

表面活性剂辅助离子液体预处理稻秆的酶解动力学与结构变化分析

以稻秆为原料进行酶解研究,考察了纤维素酶和β-葡萄糖苷酶单独作用及协同作用对稻秆酶解还原糖产量的影响,以确定最佳酶体系,并研究在最佳酶体系中不同种类表面活性剂辅助离子液体对稻秆酶解的影响和动力学特征,最后通过稻秆成分分析、FTIR、XRD、SEM对预处理前后的稻秆结构、结晶性进行了分析比较.结果表明,纤维素酶与β-葡萄糖苷酶具有协同作用,而且在最佳酶体系中,与未处理稻秆及单独离子液体预处理相比,不同种类表面活性剂辅助离子液体预处理的稻秆在酶水解48 h时纤维转化率分别增加40%~85%、10%~31%,并且预处理对反应速率的提高有促进作用.     

高压脉冲液相放电废水处理技术的研究进展

综述了国内外高压脉冲液相放电技术在水处理方面的应用及研究现状,概述了高压脉冲液相放电技术的原理以及目前高压脉冲液相放电技术的主要研究方向,如高压脉冲电源、物理效应、反应器、污染物和降解机理等方面,并提出了此技术存在的问题和前景.     

大连市化肥农药流失入海量分析

对1996~2000年间,大连市化肥农药使用现状进行了统计分析,运用不同类型有机物理论化学耗氧量的数学计算模型,分别计算了大连市化肥农药流失和工业废水排放对海域的污染影响,结果认为大连市化肥农药流失对海域污染物COD的污染贡献率远远大于工业废水排放的COD贡献率。最终提出应采取加强化肥农药使用管理等有效手段防治近岸海域化肥农药流失污染。     

Pyrolysis of rice husk and sawdust for liquid fuel

The paper is focused on studying how to convert rice husk and sawdust into liquid fuel. Rice husk, sawdust and their mixture were pyrolyzed at the temperature between 420℃ and 540℃, and the main product of liquid fuel was obtained. The experimental result showed that the yield of liquid fuel heavily depended on the kind of feedstock and pyrolysis temperature. In the experiments, the maximum liquid yields for rice husk, sawdust and their mixture were 56% at 465 ℃, 61% at 490℃ and 60% at 475℃ respectively. Analysis with GC-MS and other apparatus indicated that the liquid fuel is a complicated organic compound with low caloric value and can be directly used as fuel oil without any up-grading. As a crude oil, the liquid fuel can be refined to be vehicle oil.     

化肥厂爆炸事故的不安全动作分析

为了分析化肥厂爆炸事故背后的不安全动作。本文选取了2009-2018年间国内外发生的52起典型化肥厂爆炸事故。从发生时间的角度分析事故特性,发现白昼期间的事故发生概率相对较高。同时文章分析了运输卸料、车间操作、特种作业和管理人员4种作业类型的不安全动作,从发生频率和风险等级两个方面评估了不安全动作的综合危险度。结果表明13项不安全动作的综合危险度较高,需要重点预控。     

Morphological characteristics of flashing jet throughout superheated liquid release

Many release problems involve two-phase releases of hazardous materials of superheated liquids with high energy into the atmosphere. Such accidents are accompanied by violent phase transition and form catastrophic flashing jets. In this work, experimental and theoretical analyses were conducted to investigate dynamic characteristics of flashing jet morphology and their dependence on pressure-decay dynamics under different storage pressures, superheats, and nozzle diameters. Flashing jet morphology and angle throughout two-phase releases were captured by a high-speed camera, and the corresponding source pressure in the superheated liquid tank was measured simultaneously. Results show that three typical phases, expansion, stabilization, and decay, are characterized throughout two-phase release based on the evolution of flashing jet morphology. The jet initially expands gradually due to the enhancement of phase transition intensity, and then keeps stable when the intensity reaches its maximum, and terminally decays rapidly due to the depletion of superheated liquid. Phase transition intensity at the nozzle exit is mainly controlled by the pressure-decay dynamics. Bubbles nucleation inception sites gradually move upstream of the nozzle during the pressure decay process increasing the phase transition intensity. The increase of storage pressure, superheat and nozzle diameter promotes the mechanical and thermodynamic effects on the jet breakup. The significant increase of mechanical and thermodynamic effects effectively accelerates droplets evaporation and further affects flashing jet morphology.     

Experimental investigation of the lower flammability limit of volatile liquid fuel-aluminum powder mixtures in air

Aluminum powder was always chosen as an additive to improve the explosive performance. In this work, experiments were performed to investigate the lower flammability limit (LFL) of volatile liquid fuel-aluminum powder mixtures using a 20 L closed spherical stainless steel vessel at a temperature of 20 °C (293 K) and 40 °C (313 K). The volatile liquid fuels tested in the work were diethyl ether (DEE), epoxypropane (PO), n-pentane and n-hexane. DEE, PO and n-pentane are in the liquid phase at room temperature and can easily transition to the gas phase at 40 °C (313 K). Through a series of experiments carried out, it was found that the change in phase would affect the interaction between the components. Aluminum powder always has an inhibitory effect on the flammability of the mixtures when it is mixed with gas-phase fuels. The inhibition effect was most obvious when the aluminum powder concentration reached 200 g/m³. While the interaction between aluminum powder and liquid-phase volatile fuels was promotion and was influenced by the component proportion and the type of the volatile fuels.     

高效液相色谱-三重四级杆/复合线性离子阱质谱法测定饮用水中22种邻苯二甲酸酯

建立了一种同时测定饮用水中22种邻苯二甲酸酯(PAEs)的高效液相色谱-三重四级杆/复合线性离子阱质谱方法:饮用水样品经针头过滤器过滤,选用Biphenyl液相色谱柱进行分离,以含0.1%甲酸的水溶液和含0.1%甲酸的甲醇溶液为流动相,电离模式为电喷雾正离子,选用多反应监测触发增强子离子扫描模式进行检测。结果表明,22种PAEs的灵敏度良好,定量限为0.001～0.1 μg/L。配制浓度为0.1～100.0 μg/L的混标溶液进行进样分析,分析结果显示,22种PAEs在该范围内的线性关系良好,相关系数均大于0.995,方法的平均回收率为82.9%～108.9%,相对标准偏差为0.9%～11.2%。同时,使用增强子离子扫描谱图进行搜库匹配,定性准确性高。该方法适用于饮用水中PAEs的检测。     

苦味酸测定中关键问题的研究

目前测定苦味酸的国标方法为《生活饮用水标准检验方法有机物指标》(GB/T 5750.8—2006)中的衍生物-液液萃取-气相色谱法,在实际测试过程中,发现水样pH值和基质效应会影响苦味酸测定。当pH值为8~12时,生成的氯化苦响应强度变化不大;在pH约为13时,响应强度最大。水质中除腐殖酸、硝基甲烷及2,4,6-三硝基甲苯会影响苦味酸测定外,硝基酚类和甲基酚类同样起到正干扰作用,因此,国标方法不能全面和准确地测定水中的苦味酸含量。