加油站地下储油罐压力管理系统的相关研究

在当前普遍采用的加油站真空辅助式第二阶段油气回收系统中,为了避免回收到地下储油罐中的油气再次通过P/V阀排空,必须对其中气相空间的压力实施有效控制。从国外的发展情况来看,地下储油罐的压力管理系统主要分为基于膜分离技术、基于弹性气囊和基于活性炭吸附三大类,其中膜法油气回收装置在国内已经得到了较多关注。首次系统介绍了气囊式压力管理系统的工作原理及其主要结构设计,具体包括管线布局、钢制压力容器壳体、位于容器顶部封头上的接口组件和全部位于容器内的气囊等;同时对另外一种可行方案进行了分析。     

土壤-纳滤系统处理再生水补充地下水的研究

为充分保障再生水回灌地下时的水质安全、提供高质量地下水资源,在土壤处理系统中嵌入纳滤技术强化对再生水的处理效果,并初步探讨土壤系统作为前处理对纳滤膜污染的控制机理.结果表明,未采用臭氧氧化预处理前,土壤处理对再生水DOC和UV254的平均去除率分别为22%和20%.臭氧氧化对UV254的平均去除率为51%,并将土壤对D...     

高岭土对不同污染物微滤过程的影响

本研究采用原子力显微镜(AFM)结合自制的膜探针以及Zeta电位仪通过分别测量不同有机污染物,即腐殖酸(HA)、牛血清蛋白(BSA)和海藻酸钠(SA)与微滤膜之间的粘附力以及相应污染物的Zeta电位,对高岭土在不同有机物微滤过程的影响进行了系统性研究。结果表明,高岭土对污染膜通量衰减的影响主要发生在膜过滤的初期阶段,其存在使HA污染膜的初期通量衰减幅度增加,BSA和SA污染膜的初期通量衰减幅度减缓;清洗后HA污染膜的通量恢复率降低,而BSA和SA污染膜的通量恢复率增大。而且,高岭土的存在使膜-HA之间的粘附力变大以及HA溶液的Zeta电位变小,膜-BSA、SA之间的粘附力变小以及相应污染物的Zeta电位都增大。因此,膜-污染物之间粘附力以及溶液的Zeta电位的变化可以指示膜污染的变化趋势。     

Concentrations and chemical forms of potentially toxic metals in road-deposited sediments from different zones of Hangzhou, China

The 25 road-deposited sediments were collected from five different land-use zones (industrial, residential, commercial, park, and countryside) in Hangzhou, China. The concentrations of metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) in these samples were determined using the ICP-AES after digestion with the mixture of HNO3-HF-HCl (aqua regia), and chemically fractionated using the modified BCR (the European Community Bureau of Reference) sequential extraction procedure. The highest metal concentration level was detected in the sample from industrial zone and commercial zone having heavy traffic. While the lowest metal level was noted in the street dust sample from residential zone, park, and countryside zone. The mobility sequence based on the sum of the BCR sequential extraction stages was: Zn (80.28%), Pb (78.68%), Cd (77.66%) ＞ Cu (73.34%) ＞ Mn (67.92%) ＞ Co (41.66%) ＞ Ni (30.36%) ＞ Cr (21.56%), Fe (20.86%). Correlation analysis and principal component analysis were applied to the data matrix to evaluate the analytical results and to identify the possible pollution sources of metals. Factor analysis showed that these areas were mainly contaminated by three sources, namely lithology, traffic, and industry.     

MBR处理工艺的发展与应用

MBR处理技术目前发展的新工艺有：改良式序列间歇反应器（MSBR）、MBR与氧化沟结合工艺、MBR与高效生物反应器相结合（MHCR）等。MBR技术推广应用的关键是解决膜污染问题和降低膜成本。MBR技术已经在水处理领域应用,和常规水处理工艺相比,MBR工艺具有处理效果好、出水水质稳定,设备简单、占地空间省等优势,对于发展城市污水回用具有重要意义。     

Comparison of Soil Extraction Isotherms of Soil Samples Saturated With Nonpolar Liquids

In multiphase systems capillary pressures play a significant role on fluid movement and retention. The facility to predict the effect of different thermal remediation strategies requires the knowledge of the effect of temperature on capillary pressure-saturation relationships in the soils. The objective of recent study was (a) to develop a technique for routinely measuring the pressure-saturation curves of soil samples saturated with a nonpolar liquid at different regulated temperatures (b) to build a database using the measured pressure-saturation curves and the physical, chemical properties of the model soils (c) to establish the dependence of nonaqueous phase liquid retention on the soil properties and the temperature. The retention curves (extraction isotherms) with nonaqueous phase liquid were determined using a modified pressure plate extractor. The wetting phase was a non-aromatic hydrocarbon distillation product. Pressure plates were designed and constructed in the laboratory of our department. The temperature was held constant at 20, 40 and 60 ^∘C. Statistical analysis was performed involving selected soil parameters and the measured nonaqueous phase liquid retention data. The results show that knowing some easily measurable soil parameters (bulk density, particle size distribution, humus and lime content) we can estimate the nonaqueous phase liquid retention of the soils. The measured “extraction isotherms” provide essential information about the temperature-dependency of pressure-saturation curves.     

Effects of Acid Rain on Competitive Releases of Cd, Cu, and Zn from Two Natural Soils and Two Contaminated Soils in Hunan, China

Leaching experiments of rebuilt soil columns with two simulated acid rain solutions (pH 4.6–3.8) were conducted for two natural soils and two artificial contaminated soils from Hunan, south-central China, to study effects of acid rain on competitive releases of soil Cd, Cu, and Zn. Distilled water was used in comparison. The results showed that the total releases were Zn>Cu>Cd for the natural soils and Cd>Zn≫Cu for the contaminated soils, which reflected sensitivity of these metals to acid rain. Leached with different acid rain, about 26–76% of external Cd and 11–68% external Zn were released, but more than 99% of external Cu was adsorbed by the soils, and therefore Cu had a different sorption and desorption pattern from Cd and Zn. Metal releases were obviously correlated with releases of TOC in the leachates, which could be described as an exponential equation. Compared with the natural soils, acid rain not only led to changes in total metal contents, but also in metal fraction distributions in the contaminated soils. More acidified soils had a lower sorption capacity to metals, mostly related to soil properties such as pH, organic matter, soil particles, adsorbed SO₄ ²⁻, exchangeable Al³⁺ and H⁺, and contents of Fe₂O₃ and Al₂O₃.     

基于决策树的辽宁省北部沙漠化信息提取研究

以沙漠化问题较突出的辽宁省北部地区为例,选取2007年Landsat 5 TM遥感影像作为基本数据源,通过对影像中耕地、林地、草地、水域等常见地物及典型沙漠化土地进行光谱特征分析和波段间的相互运算,将修改型土壤调整植被指数（MSAVI）、归一化差异水体指数（NDWI）和遥感图像缨帽变换后的土壤亮度指数（SBI）、绿度植被指数（GVI）及湿度指数（WVI）等特征变量融入决策树分类模型后进行分层分离,从而实现对沙漠化信息的高精度提取。结果显示,决策树分类法可排除提取地物时的干扰信息,是保证沙漠化土地信息快速自动提取的方法之一。     

高浓度废液纳滤膜分离工艺设计

当进行高浓度废液纳滤膜分离工艺设计时,必须首先进行纳滤膜分离工艺试验,通过工艺试验确定：纳滤膜型号,完成膜的筛选工作;确定纳滤膜分离规律、分离模型、膜污染规律。利用获得的数学关系式确定主要操作运行压力、浓缩液流量、膜面积、组件数目、膜组件排列方式、冷却循环系统设计、纳滤膜污染的预测与清洗系统设计。纳滤膜清洗系统与自控系统应该根据试验结果并考虑纳滤膜生产商提供的数据进行设计。     

液固比对含重金属水泥熟料制品中重金属释放的影响

通过模拟煅烧试验制取水泥熟料,参照JGJ 55-2000（《普通混凝土配比设计规程》）制取混凝土样品,参考SR003.1和NEN 7375浸出试验,分别研究液固比对粒状及块状混凝土样品中重金属（Cr、Ni和As）释放的影响。结果表明,在不同液固比条件下粒状混凝土中的重金属浸出浓度为Cr>Ni>As,Cr、As浸出浓度基本保持不变,分别为2 500 μg/L左右和5～6 μg/L,Ni在液固比（L∶S）<6时,浸出浓度随着液固比的增加而降低,在L∶S>6时,浸出浓度较稳定,为35.7～41.5 μg/L;浸出量均随着液固比的增加而增大。液固比（L∶S）<10时,块状混凝土中重金属累积释放量及扩散系数均随液固比的增加而增大,当L∶S>10时两者基本保持不变。