Size and resin fractionations of dissolved organic matter and trihalomethane precursors from four typical source waters in China

Dissolved organic matter (DOM) and its potential to form disinfection by-products (DBPs) during drinking water treatment raise challenges to water quality control. Understanding both chemical and physical characteristics of DOM in source waters is key to better water treatment. In this study, the DOM from four typical source waters in China was fractionated by XAD resin adsorption (RA) and ultrafiltration (UF) techniques. The trihalomethane formation potential (THMFP) of all fractions in the DOM were investigated to reveal the major THM precursors. The fraction distributions of DOM could be related to their geographical origins in a certain extent. The dominant chemical fraction as THM precursors in the DOM from south waters (East-Lake reservoir in Shenzhen and Peal rivers in Guangzhou) was hydrophobic acid (HoA). The size fraction with molecular weight (MW) <1 kDa in both south waters had the highest THMFP. The results of cluster analysis showed that the parameters of fractions including DOC percentage (DOC%), UV₂₅₄%, SUVA₂₅₄ (specific UV₂₅₄ absorbance) and THMFP were better for representing the differences of DOM from the studied waters than specific THMFP (STHMFP). The weak correlation between SUVA₂₅₄ and STHMFP for either size or XAD fractions suggests that whether SUVA₂₅₄ can be used as an indicator for the reactivity of THM formation is highly dependent on the nature of organic matter.     

XAD-7吸附-毛细管柱气相色谱法测定工作场所空气中乙二醇

采用离子交换树脂XAD-7吸附-毛细管柱气相色谱法测定工作场所空气中乙二醇,结果表明,该方法在0 mg/L~1 116 mg/L范围内线性良好,方法检出限为0.88 mg/L,当采样体积为7.5 L时,最低检出质量浓度为0.11 mg/m3。乙二醇标准溶液测定结果的RSD为1.3%,空白加标回收率为80.1%~107%,方法的采集效率为98.0%。     

羊毛角蛋白接枝聚丙烯酸-丙烯酰胺吸水树脂的制备

以废弃羊毛为主要原料,采用溶液聚合法制备了羊毛角蛋白接枝聚丙烯酸-丙烯酰胺高吸水性树脂。详细探讨了羊毛角蛋白含量、丙烯酸比例、反应温度、交联剂和引发剂等条件对合成树脂吸水性能的影响。结果显示,当角蛋白占比为5 wt%,丙烯酸比例为70%,反应温度为70℃,交联剂用量为0.1 wt%,引发剂用量为0.8 wt%时,改性树脂吸水倍率最好。另外,采用红外光谱、全质构仪和吸水速率对角蛋白改性前后的产物进行了结构分析和性能测试。结果显示,羊毛角蛋白的引入可以提高树脂的强度、吸水速率和耐盐能力。     

木粉/壳聚糖接枝丙烯酸-丙烯酰胺吸附树脂对二元重金属离子溶液中Pb^2＋的吸附

采用自制木粉/壳聚糖接枝丙烯酸-丙烯酰胺吸附树脂R1、R2、R3对二元金属离子Cu2＋/Pb2＋和Zn2＋/Pb2＋溶液中的吸附性能进行了较系统考察。Pb2＋离子溶液中存在竞争离子Cu2＋、Zn2＋时,随竞争离子浓度增加,3种吸附树脂R1、R2、R3对Pb2＋的吸附量明显下降,而竞争离子吸附量显著增加。二元溶液中各金属离子浓度相同时,3种树脂对竞争离子Cu2＋、Zn2＋的吸附量大于对Pb2＋的吸附量;各溶液中分别加入NaCl及NaNO3、尿素后,对Pb2＋离子的吸附量下降迅速。随吸附树脂用量增加,竞争离子Cu2＋、Zn2＋的吸附量逐渐减小,Pb2＋的吸附量在吸附树脂用量0.10 g/L（Zn2＋/Pb2＋溶液）或0.15 g/L（Cu2＋/Pb2＋溶液）时出现最大值。溶液pH值对树脂吸附性能有显著影响。3.0     

剩余污泥中微生物絮凝剂的提取方法比较

分别采用低浓度和高浓度剩余污泥对剩余污泥中微生物絮凝剂(MBF)的多种提取方法(超声法、树脂法、超声-树脂法、树脂-超声法、超声-树脂-超声法和树脂-超声-树脂法等)进行了比较研究.结果表明,各种复合形式的提取效果均优于超声法或树脂法单独使用的提取效果.在各种复合形式中,以树脂-超声法所提取MBF的含量最高且絮凝效果最好.此外,所提取的MBF浓度与污泥浓度正相关.从剩余污泥中直接提取MBF,在降低MBF生产成本的同时实现了污泥的资源化利用.     

大孔树脂NKA-II对双酚A的吸附性能

研究了大孔树脂NKA-II对双酚A（BPA）的吸附性能,考察了吸附过程的动力学、热力学及树脂的再生性能。BPA溶液呈弱酸性,不需调节pH可直接进行吸附。BPA在大孔树脂NKA-II上的吸附过程可用准二级动力学方程很好地描述。树脂对BPA的吸附是吸热反应,符合Freundlich等温吸附方程,吸附过程属于可自发进行的物理吸附。BPA的吸附过程中同时存在着溶剂的解吸。大孔树脂NKA-II具有良好的重复使用性能,新树脂的平衡吸附量为10.44 mg/g,再生20次后平衡吸附量仍为10.43 mg/g。     

树脂-气升式环流生物反应器的脱氮性能

为了提高废水生物处理过程的脱氮性能,设计了树脂-气升式环流生物反应器,通过实验考察了该反应器连续抗氨氮冲击的能力,并验证了反应器中吸附铵离子的强酸阳离子树脂生物再生的可行性,分析了生物再生机理。结果表明,原水中铵离子之外的阳离子的存在是实现树脂生物再生的关键。     

Decomposition of 2,2',4,4',5,5'-hexachlorobiphenyl with iron supported on an activated carbon from an ion-exchange resin

An activated carbon (AC) containing a high concentration (374 mg g⁻¹) of Fe was prepared by carbonization of an ion-exchange resin. To examine its chemical reactivity as a catalyst to decompose 2,2′,4,4′,5,5′-hexachlorobiphenyl (PCB-153), the decomposition parameters of temperature and time were varied under air or N₂. Decomposition at 350 °C was achieved within 15 min under air and 30 min under N₂, and the efficiency of PCB-153 decomposition was 99.7% and 98.0%, respectively. An analysis of inorganic chloride ions revealed that PCB-153 was mineralized effectively during the decomposition. The Brunauer-Emmett-Teller (BET) surface area and pore volume of the AC were measured to assess the adsorption capacity before and after the decomposition. The differences between decomposition under air and N₂ reflected the differences in the BET surface and pore volume measurements. A decomposition pathway was postulated, and the reactive characteristics of chlorine atoms loaded on the benzene rings followed the order of para > meta > ortho, which agrees with the calculated results from a density functional theory study.     

缩聚-Fenton-A/O生物流化床组合工艺处理酚醛废水的工程案例分析

以广州某公司生产酚醛树脂时产生的酚醛废水为研究对象,针对其高浓度、生物毒性强、可生化性差及难降解等特点,设计缩聚-Fenton-A/O生物流化床联合工艺进行处理。此工艺的工程实践中,在总HRT低于75 h的操作条件下,当进水COD、苯酚及甲醛浓度分别为1.0×105～1.2×105 mg/L、2.2×104～2.5×1...     

Effects of a chelating resin on metal bioavailability and toxicity to estuarine invertebrates: Divergent results of field and laboratory tests

Benthic invertebrates can uptake metals through diffusion of free ion solutes, or ingestion of sediment-bound forms. This study investigated the efficacy of the metal chelating resin SIR 300™ in adsorbing porewater metals and isolating pathways of metal exposure. A field experiment (Botany Bay, Sydney, Australia) and a laboratory toxicity test each manipulated the availability of porewater metals within contaminated and uncontaminated sediments. It was predicted that within contaminated sediments, the resin would adsorb porewater metals and reduce toxicity to invertebrates, but in uncontaminated sediments, the resin would not significantly affect these variables. Whereas in the laboratory, the resin produced the predicted results, in the field the resin increased porewater metal concentrations of contaminated sediments for at least 34 days and decreased abundances of four macroinvertebrate groups, and richness in all sediments. These contrasting findings highlight the limits of extrapolating the results of laboratory experiments to the field environment.