磷酸铵镁沉淀法去除垃圾渗滤液中氨氮的实验研究

本试验采用磷酸铵镁沉淀法（MAP）处理垃圾渗滤液中的高浓度氨氮,采用MgCl2.6H2O和Na2HPO4.12H2O为沉淀剂,研究了该方法脱氮的主要影响因素并得出了最佳处理条件,即在室温条件时,pH值为10～10.5、反应摩尔比n（Mg2＋）：n（NH4＋）：n（PO43-）为1.2：1.0：0.9时,对于本试验中的垃圾渗滤液来说,为最佳反应条件,对氨氮的去除率可达到97%以上,达到国家杂用水水质标准中对氨氮的要求。     

Main particulate matter components in Saxony (Germany)

Aerosol filter samples have been collected nearby the industrialised basin of Leipzig in Saxony (Germany) at the research station Melpitz of the Institut für Troposphärenforschung e.V. (IfT). Time series (1992–1998) and a three year comparison (1995–1997) of two different aerosol filter sampling systems, the Sierra-Andersen-PM 10 high volume sampler (daily sample, PM 10 inlet) and the Rupprecht and Patashnik Co. Inc. Model Partisol 2000 (weekly sample, PM 10 and PM 2.5 inlet) are presented and discussed. The comparison of the different sampling systems and strategies yields small differences between the daily and weekly samples for mass and different ions, which may be influenced by sampling duration and flow rates. A general trend of change in aerosol composition was observed: Soot and Sulphate concentrations decreased whereas Nitrate and Ammonium concentrations increased. During summers the mass of coarse particles is higher than in other seasons. One reason could be found in the occurence of longer periods of dry ground surfaces enabling reemission of crustal and biological material. The time series have been integrated in a longer historical aerosol mass trend for Saxony and do show a good agreement. Since 1990 a significant downward trend in gravimetric mass concentration was found.     

测控系统及组态软件在危险环境中的应用

为了及时有效地监测与控制危险环境中的易燃易爆危险品,设计并组建了实验室条件下模拟监控应用系统,通过组态软件完成实时监测与控制.对模拟试验中数据处理方法和参数设计也进行了相关研究.     

稳定剂对电解锰废渣中高浓度可溶性锰稳定效果的影响

为满足大宗废渣经济性处理的需要,从碱性物质、磷酸盐、碳酸盐类药剂筛选出“物美价廉”稳定剂,考察了CaO、MgO和Ca10(PO4)6(OH)2及其与NaHCO3和Na3PO4的组合对电解锰废渣中的可溶性锰的稳定化效果,并采用矿物组成分析、锰价态分析和形态变化探讨可溶性锰固定机理.结果表明:投加10%MgO锰渣中可溶性锰固定率达到100%,9%CaO+5%NaHCO3和9%CaO+5%Na3PO4的组合实现可溶性锰固定率95%以上.上述3组稳定剂将可溶性Mn2+先转变为沉淀态锰进一步转变为高价态含锰物相.后两组中NaHCO3或Na3PO4的加入促进了Mn2+向Mn3+、Mn4+的转化.     

Validation of the UN test method N.5

Many substances react with water in such a way that flammable gases are formed. For transport issues this reaction may possess a considerable hazard especially if the cargo is wetted by rain or by water from other sources. In the UN Recommendations on the Transport of Dangerous Goods these kinds of problems are addressed. The UN test N.5 “Test method for substances which in contact with water emit flammable gases” corresponds to this hazard. Classification according to the test method is done by measurement of the gas evolution rate of the flammable gas by any suitable procedure. At BAM a gravimetric approach is used to measure the gas evolution rate. In this paper we present the evaluation of the apparatus by means of an absolute calibration routine utilizing a reaction where a known amount of gas is produced as well as the evaluation of important parameters influencing the gas evolution rate using different substances. It can be shown that the apparatus is capable of measuring absolute gas volumes as low as 6 mL with an acceptable error of about 17% as determined from the reaction of Mg with demineralized water.     

羟基化锌催化臭氧氧化去除水中痕量磺胺嘧啶

以实验室制备的羟基化锌(ZnOOH)为催化剂,研究了其催化臭氧化去除水中痕量磺胺嘧啶(SD)的效能,通过研究叔丁醇对催化效果的影响,推断了催化反应机理,探讨了臭氧投加量、水质因素、催化剂投加量和使用次数对催化性能的影响因素.结果表明,ZnOOH对臭氧氧化水中的SD有较强的催化活性.催化剂表面结合的羟基基团有利于催化反应.在优化的实验条件下,蒸馏水中反应30min时,催化臭氧化比单独臭氧化对SD的去除率提高了47.7%.催化过程遵循自由基反应机理,SD的去除效果随催化剂投加量的增加而提高,催化剂在重复使用后催化效果基本不变,水中的氯离子可以明显降低催化剂的活性,偏碱性条件下,催化效果更佳.     

氢氧化镁-壳聚糖复合絮凝剂对印染废水的脱色研究

使印染废水脱色是废水处理的重要问题,利用无枳／有机复合絮凝剂可取得优良的脱色效果。采用氢氧化镁一壳聚糖复合絮凝剂对印染废水进行脱色处理,研究了pH值、壳聚糖投加量、复合絮凝剂加入量等对脱色效果的影响。结果表明氢氧化镁一壳聚糖复合絮凝剂比单独使用氢氧化镁絮凝剂脱色效果好。壳聚糖是一种天然高分子化合物,是甲壳素的脱乙基产物。来源丰富,且具有无毒副作用、易降解等优点。利用壳聚糖作为复配剂制备的复合絮凝减少了镁盐的使用量,有效降低了废水处理成本,避免引起二次污染。     

环介导等温扩增技术(LAMP)检测人星状病毒方法的建立及其在再生水检测中的应用

为快速高效地检测人星状病毒,建立了一种新的试验方法——环介导等温扩增技术(loop-mediated isothermal amplification technology,LAMP),并对人星状病毒LAMP反应条件进行了优化.结果表明,镁离子终浓度为4 mmol·L-1、甜菜碱终浓度为1mol.L-1的25μL体系下...     

Thermal defluorination behaviors of PFOS,PFOA and PFBS during regeneration of activated carbon by molten salt

• New method of mineralizing PFCs was proposed. • Activated carbon was regenerated while mineralizing PFCs. • Molten NaOH has good mineralization effect on PFOS and PFBS. Current study proposes a green regeneration method of activated carbon (AC) laden with Perfluorochemicals (PFCs) from the perspective of environmental safety and resource regeneration. The defluorination efficiencies of AC adsorbed perfluorooctanesulfonate (PFOS), perfluorooctanoic acid (PFOA) and perfluorobutanesulfonate (PFBS) using three molten sodium salts and one molten alkali were compared. Results showed that defluorination efficiencies of molten NaOH for the three PFCs were higher than the other three molten sodium salts at lower temperature. At 700°C, the defluorination efficiencies of PFOS and PFBS using molten NaOH reached to 84.2% and 79.2%, respectively, while the defluorination efficiency of PFOA was 35.3%. In addition, the temperature of molten salt, the holding time and the ratio of salt to carbon were directly proportional to the defluorination efficiency. The low defluorination efficiency of PFOA was due to the low thermal stability of PFOA, which made it difficult to be captured by molten salt.The weight loss range of PFOA was 75°C–125°C, which was much lower than PFOS and PFBS (400°C–500°C). From the perspective of gas production, fluorine-containing gases produced from molten NaOH-treated AC were significantly reduced, which means that environmental risks were significantly reduced. After molten NaOH treatment, the regenerated AC had higher adsorption capacity than that of pre-treated AC.     

铝镁氢氧化物溶胶吸附脱色性能的研究

对染料在具有永久正电荷的铝镁氢氧化物上的吸附,考察了铝镁比、染料类型、pH值等因素对吸附效果的影响,并进行了动力学、热力学研究结果表明,铝镁氢氧化物溶胶具有良好的脱色效果,铝镁比为1∶3的溶胶处理效果最佳;溶胶对大多数阴离子型染料的脱色率明显大于其它类型;染料的吸附量随pH值的增大而减小;溶胶对实验的各种阴离子型染料的饱和吸附量在961—3319mg·g-1之间;吸附量随温度升高而减小,说明吸附是放热过程