回火焊道焊接技术在焦炭塔修复中的应用

为了避免耗时长、费用高的焊后热处理或整体更换筒节,针对铬钼钢焦炭塔内壁环焊缝的裂纹和锥段内壁腐蚀缺陷,提出采用回火焊道焊接技术对内壁缺陷部位进行修复。结果表明,严格按照经评定合格的焊接工艺进行施焊,回火焊道焊接技术可以利用层道间的焊接热循环作用达到焊后热处理的效果,使焊接修复后铬钼钢焦炭塔的母材和复合层的冶金和力学性能满足要求。     

浅谈TOC与CODCr的关系

介绍了TOC和CODCr的含义,比较了TOC与CODCr测定方法、使用仪器的不同和各自的优缺点,并从理论上和实际水样测定中论述了TOC和CODCr的相关性。对于不同的废水,TOC 与CODCr的相关性不一样,必须先实验求出二者之间的关系。     

地下饮用水中痕量NO2-的催化动力学法测定

报道了一种新的测定NO2-的高选择性和高灵敏度的催化光度分析法.基于H3PO4介质中,碘绿与溴酸钾的氧化还原反应受亚硝酸盐的催化使碘绿褪色.据此建立了测定NO2-的新方法.本方法检出限为0.29μg/L,该方法用于地下饮用水、环境标样的测定,相对标准偏差为1.05%～4.80%,加标回收率为95%～117%.     

空气和废气监测中H2S标液的选择

有2种不同方法制备的H2S标准溶液进行测定,结果表明,所得标准曲线斜率一致,因此,在实际工作中可对其灵活运用。     

Metabolism of the Nonylphenol Isomer [Ring-U-14c]-4-(3′,5′-Dimethyl-3′-Heptyl)-Phenol by Cell Suspension Cultures of Agrostemma githago and Soybean

Abstract

The biotransformation of the nonylphenol isomer [ring-U-¹⁴C]-4-(3′,5′-dimethyl-3′-heptyl)-phenol (4-353-NP, consisting of two diastereomers) was studied in soybean and Agrostemma githago cell suspension cultures. With the A. githago cells, a batch two-liquid-phase system (medium/n-hexadecane 200:1, v/v) was used, in order to produce higher concentrations and amounts of 4-353-NP metabolites for their identification; 4-353-NP was applied via the n-hexadecane phase. Initial concentrations of [¹⁴C]-4-353-NP were 1 mg L^?1 (soybean), and 5 and 10 mg L^?1 (A. githago). After 2 (soybean) and 7 days (A. githago) of incubation, the applied 4-353-NP was transformed almost completely by both plant species to four types of products: glycosides of parent 4-353-NP, glycosides of primary 4-353-NP metabolites, nonextractable residues and unknown, possibly polymeric materials detected in the media. The latter two products emerged especially in soybean cultures. Portions of primary metabolites amounted to 19–22% (soybean) and 21–42% of applied ¹⁴C (A. githago). After liberation from their glycosides, the primary 4-353-NP metabolites formed by A. githago were isolated by HPLC and examined by GC-EIMS as trimethylsilyl derivatives. In the chromatograms, eight peaks were detected which due to their mass spectra, could be traced back to 4-353-NP. Seven of the compounds were side-chain monohydroxylated 4-353-NP metabolites, while the remaining was a (side-chain) carboxylic acid derivative. Unequivocal identification of the sites of hydroxylation/oxidation of all transformation products was not possible. The main primary metabolites produced by A. githago were supposed to be four diastereomers of 6′-hydroxy-4-353-NP (about 80% of all products identified). It was concluded that plants contribute to the environmental degradation of the xenoestrogen nonylphenol; the toxicological properties of side-chain hydroxylated nonylphenols remain to be examined.     

“加压上浮法”应急除藻技术在水源地的应用示范

近年来,太湖蓝藻水华问题日趋严峻,除藻技术是解决该问题最直接而有效的手段,对现有各类除藻技术进行了比较,并以"加压上浮法"应急除藻技术在苏州阳澄湖局部地区的示范工程为例,介绍了该方法的技术原理、技术实现以及在工程应用中的实际意义,为同行在水源地或特殊功能区除藻技术的应用提供参考。     

聚四氟乙烯高压密封罐消解样品测定五氧化二钒

利用聚四氟乙烯高压密封罐消解矿石样品测定五氧化二钒,具有操作手续相对简便、轻松、快捷等优点,与传统的硫酸－磷酸混合酸消解或采用碱熔融前处理法比较,相对误差小于１．６％,样品的添加标准回收率为９２．９％～１０３．５％。     

5—(4—磺酸基苯偶氮)8—(2,4—二硝基苯氨基)喹啉测定食品中铜的研究应用

在弱碱性介质中 ,5— (4—磺酸基苯偶氮 ) 8— (2 ,4—二硝基苯氨基 )喹啉 (SPDNPAQ)与铜反应生成 2∶ 1紫红色络合物 ,体系 λmax=56 0 nm,ε=1.2 3× 10 5L· mol-1· cm-1。铜含量在 0～ 0 .4 mg/ L内符合比耳定律 ,方法用于一些生物样品和水样中铜的测定。     

应用Dot—ABC法检测植物镉金属污染

用不同浓度的氯化镉诱导黄瓜幼叶Cd—MT的产生,并应用Dot—ABC法检测了30种来自天水不同区域植物的MT含量,初步确定它们的重金属污染情况。结果表明,CA—MT浓度与环境诱导浓度呈显著正相关,Dot—ABC法检测的植物金属硫蛋白的最低含量为16mg,并初步估测了其中10种植物可能存在不同程度的重金属污染。本法具有特异、简便和灵敏的特点,可用于农产品镉金属污染的检测。     

沥青涂层对桩侧摩阻力影响的试验研究

采用改进直剪仪模拟桩与土之间的滑动摩擦,研究了沥青涂层对桩侧摩阻力的影响。试验结果表明,桩侧摩阻力与土的类型、法向应力有关,随着法向应力的增长,滑动摩阻力也相应增长,且增长近似呈线性关系;在一定的法向应力下,沥青涂层对减小滑动摩阻力有一定的作用,随着法向应力的增长,沥青涂层亦会导致滑动摩阻力增加。