100% recycled hot mix asphalt: A review and analysis

A holistic evaluation of the feasibility of producing 100% recycled mixtures is presented. Eleven technologies readily available for producing 100% Reclaimed Asphalt Pavement (RAP) hot asphalt mixtures are described in the article and the complementary video (http://youtu.be/coj-e5mhHEQ). The recorded performance of 100% RAP mixtures is analyzed along with identification of typical high RAP distresses. Recommended mix design procedures and the best RAP management strategies are described. A cradle-to-gate analysis of environmental effects indicated 18 kg or 35% CO₂eq savings per t of produced 100% RAP asphalt mixture compared to virgin mix, while cost analysis showed at least 50% savings in material related expenses.     

应急修复耦合资源回收的实践-以一起化工企业突发环境事件为例

通过东莞市一起铜氨蚀刻液泄漏引致突发环境事件的应急处理过程,介绍了污染控制和应急修复技术的应用情况,通过将高浓含氨污水蒸发制取NH4Cl产品,以及将污水处理至优于《地表水环境质量标准》（GB3838-2002）之Ⅰ类水质要求,作为我国首例应急修复耦合资源回收制取化工产品的成功案例,为化工类企业突发环境事件的应急处理提供决策参考.     

钼冶炼工艺的循环经济探讨

钼是重要的稀有金属之一,主要通过氧化分解辉钼矿来提取。我国普遍使用反射炉、回转窑等焙烧设备生产氧化钼,造成了严重的SO2污染和资源浪费问题。为改变辉钼矿焙烧分解工艺的污染状况,硝酸高压分解、碱性高压氧分解、次氯酸钠分解和电氧化分解等辉钼矿湿法工艺相继被开发出来。但是这工艺往往只关注在如何获取金属钼等资源,而忽视了辉钼矿中占40%的硫资源。从循环经济角度分析了不同辉钼矿分解工艺的物质流向,探讨符合清洁生产和循环经济精神的工艺革新方向,提出了纯氧氧化焙烧和浓硫酸氧化两种新工艺。     

集成膜法水处理工艺的研究与应用

集成膜法除盐系统具有连续产水、出水质量好、易控制、占地少、不需酸碱、利于环保等优点。文章通过对集成膜法水处理技术进行研究与应用,将原有的化学除盐水处理方式改为集成膜法水处理工艺,该方法产水水质高且水质稳定,每年可节约酸碱200 t,阴、阳离子交换树脂10 t,切实解决电厂所面临的产水水质不稳定、酸碱废液排放等问题,有力推动了清洁生产。     

Nanocomposites of Cellulose Acetate Butyrate Reinforced with Cellulose Nanocrystals

Nanocrystals were prepared by acid hydrolysis of bacterial cellulose microfibrils. These were topochemically trimethylsilylated, in an attempt to reduce their hydrophilicity. Composites were made by dispersing either native or silylated crystals in cellulose acetatebutyrate matrixes and solution casting of the dispersions. Particles were characterized by transmission electron microscopy. The composites were characterized by differential scanning calorimetry and dynamic mechanical analysis. The unmodified cellulose crystals exhibited better reinforcement characteristics than the trimethylsilated crystals.     

Operating condition influences on PCDD/Fs emissions from sinter pot tests with hot flue gas recycling

This study was designed to clarify the influence of operating conditions on the formation and emissions of polychlorinated-pdibenzodioxins and dibenzofurans (PCDD/Fs) from a sintering process with hot flue gas recycling. A pilot scale sinter pot with simulated flue gas recycling was developed, and four key operational parameters, including temperature, oxygen content of the simulated waste flue gas, the coke rate of the sintering mixture, and the quicklime quality, were selected for exploring PCDD/Fs formation. The results showed that the temperature of the recycled flue gas had a major affect on PCDD/Fs formation, and a high temperature could significantly increase their formation during sintering. A clear linear correlation between the temperature of recycling flue gas and PCDD/Fs emission (r = 0.93) was found. PCDD/Fs could be reduced to a certain extent by decreasing the level of oxygen in the recycled flue gas, while sintering quality was unchanged. The coke rate had no significant influence on the formation of PCDD/Fs, but the quality of quicklime used in the sintering mixture could affect not only the amount of PCDD/Fs emissions but also the sintering productivity. Compared with a benchmark sinter pot test, PCDD/Fs emissions markedly decreased with improvements to quicklime quality. However, the reduction in PCDD/Fs emissions realized by using high-quality quicklime was limited by the temperature of the inlet gas. The highest reduction achieved was 51% compared with conventional quicklime when the temperature of the inlet gas was 150°C.     

基于加热改性预处理废线路板的热力学作用过程研究

电子废物是固体废物环境管理的热点问题,而废线路板是电子废物的研究核心.废线路板是由铜箔、树脂和增强材料层压而成的复合材料,以破碎和分选过程相组合的机械物理方法是其资源化回收处理的主流技术,就如何提高破碎效果已成为机械物理技术发展面临的难题.研究提出了加热改性预处理的技术方法,用于废线路板结构物理改性和微观破坏,以提高破碎解离效率,其可实现金属与非金属的高度解离.基于改性处理技术,本文还分别从微观和宏观破坏力学角度,探究了加热改性处理机制.同时,结合ANSYS有限元热应力模型,对改性作用进行了理论分析.     

不同能量电子辐照下星用瑞侃导线性能退化研究

目的研究卫星上外露导线在空间辐射环境下的耐受能力。方法通过分析GEO轨道下在轨10年航天器外露瑞侃导线的辐照环境,研究低能和高能电子对导线性能的影响,地面模拟试验参数选择能量分别为45 keV和1 MeV,注量率均为8.3×10^10 e/(cm^2·s),总注量均为2×10^16 e/cm^2。考察瑞侃导线力学性能(断裂伸长率、拉伸强度)和电性能(击穿电压)的退化情况,并用XPS和SEM测试分析手段,对其电子辐照损伤机理进行研究。结果在不同能量电子辐照下,瑞侃导线的力学性能均略有下降,没有显著区别,而电学性能严重退化,且低能电子较高能电子对其电学性能影响更为严重,其击穿电压分别下降了100%和50%。结论通过剂量-深度分布计算,45 keV入射电子能量全部沉积在样品表层下数微米的深度范围内,完全被导线外皮吸收,对样品的损伤较大;而1 MeV入射电子能量绝大部分穿透表皮沉积在样品铜芯中,因而其性能退化情况相对低能电子较小。进一步的,通过SEM和XPS测试和分析发现,电子辐照造成瑞侃导线分子链降解,形成自由基以及气体,自由基的再交联是造成瑞侃导线损伤的重要机理。     

基于偏离程度的某机械陀螺环境敏感参数分析

目的明确某机械陀螺在贮存环境下的环境敏感参数。方法以机械陀螺在热加速老化试验中的各项性能参数检测结果为基础,依次对各参数检测数据进行能表征参数退化程度的无量纲转化,分析参数相对于原始值的偏离程度以及环境敏感程度,偏离度最大的参数即为陀螺的主要环境敏感参数。结果解锁误差、接触起始角、垂直漂移、水平漂移参数的偏离程度分别为1041.7、1248.3、1472.7、417.7。垂直漂移参数是该机械陀螺在贮存环境下的主要环境敏感参数。结论提出的分析方法可有效用于多参数产品的环境敏感参数分析。     

成都市典型非道路工程机械排气烟度分析

采用不透光烟度计采集了成都市典型工程机械(挖掘机、装载机、叉车和压路机)排气烟度,研究了机械功率对其活动水平(燃油消耗量和年均工作时间)的影响,同时也研究了机械发动机构造和机械排放标准对其排气烟度的影响;同时,采用氮硫测定仪分析了机械油品硫含量,研究了硫含量对其排气烟度的影响.试验结果表明:机械功率越大的工程机械,燃油消耗量和年均工作时间数越高.成都典型工程机械排气烟度排放水平最低的为装载机,最高的为压路机;同时,超高排放装载机与叉车的占比较高.工程机械排气烟度受机械发动机排量、机械发动机构造、机械发动机排放标准和机械用油的综合影响,通过对工程机械装配电控发动机、提高原机排放标准和使用低硫燃油均能直观反映出机械排气烟度不同程度的改善.此外,油品中硫含量越高,机械排气烟度越大.