丁腈橡胶密封圈高温老化行为——自由状态和承压状态

目的研究丁腈橡胶密封圈自由状态和承压状态下的高温老化行为。方法以拉伸强度和拉断伸长率为参数,对各温度下的老化行为进行表征和分析。结果 70℃条件下机械应力大大加快了橡胶密封件拉伸强度的下降速率,以致试验64 d时拉伸强度甚至比110℃时还低,拉断伸长率的下降速率也明显加快了;90℃加速条件下机械应力对拉伸强度的下降有一定的促进作用,但对拉断伸长率的变化基本无影响;110℃加速条件下机械应力对拉伸强度和拉断伸长率均没有明显的影响。结论机械应力在较低温度下可以显著促进丁腈橡胶密封圈热氧老化,高温条件下促进作用不明显。     

构建中国快递行业包装废弃物产业链对环境影响重要性研究

互联网和电子商务的快速发展带动了快递行业的飞速发展,使社会对快递包装物的需求增加.庞大的快递废弃物给环境造成了严重的破坏.然而由于相关法律不健全、回收体系不完整、企业不积极以及回收渠道少等原因导致了中国的快递包装废弃物回收率非常低.构建快递包装废弃物回收产业链,并降低快递包装废弃物对环境造成的影响就成了社会经济发展的一个迫切需要.为此推广环保材料和环保产品以及提高消费者环保意识入手,构建快递包装废弃物回收产业链势在必行.     

再生水灌溉土壤人工合成麝香累积模型模拟

人工合成麝香(HHCB/AHTN)是近几年来受关注较多的药品与个人护理品(PPCPs)类新型污染物之一,再生水灌溉是HHCB/AHTN输入土壤的主要途径.本研究结合再生水灌溉土壤的实地检测结果,采用HYDRUS-1D模型,模拟了长期灌溉再生水条件下土壤中HHCB和AHTN的迁移转化和累积趋势.结果表明,尽管土壤中这两种麝香的含量极低,但是再生水灌溉土壤中的含量是自来水灌溉土壤的5倍;再生水灌溉下HHCB/AHTN累积趋势从lgKoc较低为3.44时的指数型增加,到lgKoc较高为4.12和4.86时的线性增加;半衰期的变化对再生水灌溉途径输入土壤的HHCB/AHTN的表层累积影响并不明显;再生水灌溉下土壤中HHCB/AHTN的垂直迁移能力较小,灌溉40 a以后最大迁移距离只有53 cm,且受Koc变化的影响较大;通过灌溉水途径进入土壤的HHCB和AHTN通过生物降解与植物吸收途径消解的比例较低,最高只占输入总量的7.69%,但是随着lgKoc的减小和灌溉时间增加,通过生物降解和根系吸收的消解率增加.本研究结果能够为准确评估再生水灌溉途径引起的土壤中人工合成麝香HHCB/AHTN的生态风险提供依据.     

日本交通部门碳排放与低碳交通相关因素研究

本文就日本向低碳社会体系转型的过程中,交通部门碳排放现状、都市交通体系构成、实施对策等方面进行了分析,探讨其交通运输领域低碳交通的相关因素及发展模式,为中国低碳交通体系的构建提供参考。     

平板显示器回收的新挑战

显示屏（监视器和电视机）经历了从阴极射线管到平板显示器技术的快速变化。截至目前为止,只有少量的平板显示器已记录在废物收集点。平板显示器的数量越来越多,在未来需要足够的用于回收的基础设施。本文旨在通过液晶显示屏幕的回收对经济影响的案例研究来提供数量、成分、回收利用技术和经验的基本数据。对于组件和材料也适用于其他类型的电子产品,如黑色金属和有色金属,印刷电路板或电缆,回收途径和技术是众所周知的和可用的。目前,液晶显示器（LCD）在欧洲不回收。处置时,例如,通过焚烧,有价值的材料,其成分是不再可用。例如：铟具有重要战略意义的应用,如,太阳能光伏作为一种稀缺资源。液晶显示器在欧洲具有回收基础设施,因此是有用的。     

废弃产品回收处理企业环境绩效评价初探

近年来,废弃产品回收处理行业日益受到政府和社会各界的关注,而回收处理企业是实施回收处理活动的主体,相关法律、法规的出台对回收处理企业提出了更高的要求。本文在概括梳理相关法律、法规的基础上,初步建立了废弃产品回收处理企业环境绩效评价指标体系,为回收处理企业采用先进的技术工艺、降低环境负荷、加强职业健康监护和企业环境管理提供参考,以适应国家政策要求和行业发展的需要。     

火灾下钢框架结构热-力耦合模拟与性能分析

基于"自然火灾安全概念"(NFSC)的基本思想,提出了火灾下钢结构热-力耦合模拟方法。利用ANSYS的参数化设计语言,建立了ANSYS软件与OZone火灾分析软件的数据接口,实现了火灾分析软件与大型有限元软件的耦合运用。基于火灾模拟软件OZone的分析结果,利用APDL语言,对钢框架结构进行了真实火灾场景下的热-力耦合模拟。研究表明:钢框架结构在真实火灾场景下,受非均匀变热流影响,结构内部将产生热应力梯度和应力牵移现象;同时钢框架中钢梁固接时,火灾初期变形较小,当达到某个关键时间点后将开始大的变形破坏,其主要原因是钢框架内部产生塑性铰,即钢梁由固接变为铰接,释放了对钢梁的约束。     

Reducing sulfates concentration in the tannery effluent by applying pollution prevention techniques and nanofiltration

The use of large quantities of sulfuric acid and other sulfur-containing chemicals causes high sulfate concentrations in the wastewater of a tannery. The aim of this work was reducing the sulfate concentration in the final wastewater from a tannery. For that, firstly a study about the main sulfate sources in a tannery was carried out and the total sulfates load in the tannery wastewater was evaluated. Two measures for sulfates reduction were studied: the recycling of unhairing wastewater to the soaking drums and the reuse of the chromium sulfate from the tanning washing wastewater after its separation by nanofiltration (NF). The first measure proposed was studied experimentally in laboratory drums of 5 L of volume. Two series of experiments with different volumes of unhairing wastewater in the soaking bath were carried out. The quality of the final leather was evaluated by means of mechanical tests. NF experiments were carried out in a laboratory pilot plant with a spiral wounded membrane element. Concerning the results, the combination of 50% unhairing wastewater and 50% of fresh water was appropriate in order to obtain leather with an acceptable quality. Besides, it drove to a diminution of approximately 10% in the addition of sulfide in the unhairing. Related to the NF experiments, 97% of the sulfates were rejected by the membrane. The separated ions could be recycled to the tanning drums. The application of the two measures (firstly the recycling of the unhairing wastewater and secondly the NF of the tanning washing wastewater) drove to a reduction of 14.82 kg SO₄⁻² t⁻¹ of raw hide.     

Preparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production

The aim of the present work was to produce a polyaluminium ferric silicate chloride (PAFSiC) coagulant from acidic and alkaline wastewater of purifying graphite by roasting, and subsequently to evaluate coagulation efficiency of the reagent by treating surface water from the Yellow River as well as municipal wastewater in comparison with the conventional coagulant polyaluminium chloride (PAC). The PAFSiC coagulant was prepared by co-polymerization. The effects of (Al+Fe)/Si molar ratio, OH/(Al+Fe) molar ratio (i.e., value), coagulant dosage and pH value of test suspension on the coagulation behavior of FAFSiC and the stability of the PAFSiC were also examined. Results showed that PAFSiC performed more efficiently than PAC in removing turbidity, chemical oxygen demand (COD), and total phosphate (TP). The PAFSiC with a value of 2.0 and (Al+Fe)/Si ratio of 5 (PAFSiC 2.0/5) showed excellent coagulation effect for both turbidity and COD, while PAFSiC 1.0/5 was the best for TP. The optimum coagulation pH range of PAFSiC 2.0/5 was 5.0–9.0, slightly wider than that of PAC (6.0–8.0). The process can be easily incorporated into high-purity graphite production plants, thereby reducing wastewater pollution and producing a valuable coagulant.     

北京市污水资源化利用现状及其对策分析研究

北京是水资源严重匮乏的城市,水资源短缺已经成为制约北京经济社会可持续发展进程的重要因素.污水资源化将城市污水进行加工处理,转化为达标的、可供人们二次利用的合格水资源,既能增加水源,又能减少水环境污染,是解决北京目前水资源紧缺问题的最为有效的途径.文章梳理了近年来北京市污水资源化利用的发展现状,指出了北京市污水资源化利用所面临的困境,并提出了加快北京市污水资源化利用的对策.