采用火焰原子吸收分光光度法测定水样中镍含量的不确定度评定

采用火焰原子吸收分光光度法对水样中镍的含量进行测定,分析测量过程中不确定度来源及各不确定度分量对总不确定度的影响,确定测定结果的置信区间。给出本实验室测定水样中镍含量的扩展不确定度为0．062mg／L（k=2）。     

水样中镉镍的两次双波长分光光度法测定

研究采用两次双波长分光光度法 ,一次采用双峰双波长法 ,一次采用系数补偿法同时测定水样中的镉和镍。实验结果表明 ,以 5 Br PADAP为显色剂 ,镉和镍的最大吸收峰分别为 544 .8nm和 559.2nm ,最小吸收峰均为 430nm ;镉镍的线性范围为 1～ 1 6μg/ 2 5mL。此法的灵敏度同单波长法相比有明显的提高 ,应用于合成和电镀水样中的镉镍的测定 ,均得到了满意的结果。     

Rapid treatment of atrazine-contaminated water by nickel/iron bimetallic system

The utility of nickel/iron in the remediation of atraz.ine-contaminated water was investigated. The experimental results showed that nickel/iron had effective catalytic activity in dechlorinating atraz.ine under acidic conditions. The dechlonnation reaction approximately followed the first-order kinetics under the experimental conditions( nickel/iron: 1.0 g/250 ml: Ca~r~ = 20.0 mg/L), the reaction rate increased with decreasing pH value of the reaction solution and increasing the proportion of Ni: Fe within 2.95 %. For condition with 2.95% nickel/iron, the reaction rate constants were 0.07518( R = 0.9927), 0.06212( R = 0.9846) and 0.00131 min^-1 ( R = 0.9.565) at pH = 2.0, 3.0 and 4.0, respectively. HPLC analysis was used to monitor the decline of atraz.ine concentration.     

植物对纳米颗粒的吸收、转运及毒性效应

随着工程纳米颗粒的广泛使用,这些纳米材料不可避免地进入环境,对环境造成未知影响.植物是高等生物暴露于纳米颗粒的一条主要途径,工程纳米颗粒可能通过食物链使其在高营养水平生物中积累.植物与纳米颗粒间的相互作用应该受到关注和重视.已有的文献表明纳米颗粒能被植物选择性地吸收并引起植物毒性,但纳米颗粒进入植物体内的机制仍不明确.多数关于植物吸收纳米颗粒的研究是在理想条件如水培实验下开展,并且集中在植物的种子发芽或是幼苗生长阶段.描述纳米颗粒在植物体内的生物转化和在植物体内分配的报道较少,而且这方面的机制没有阐述清楚.目前有许多研究者关注纳米颗粒的植物毒性效应,但这方面的研究需要进一步深入.     

有序介孔碳载金/L-赖氨酸/纳米金修饰电极的制备及其对邻苯二酚、对苯二酚的检测响应研究

通过化学还原的方法合成有序介孔碳负载纳米金粒子,并构筑有序介孔碳载金/L-赖氨酸/纳米金复合膜修饰玻碳电极;利用扫描电镜观察介孔碳和介孔碳复合膜的微观结构,并用循环伏安法、电化学阻抗谱表征自组装电极的过程.在此基础上用差分脉冲伏安法研究对苯二酚和邻苯二酚混合物在该电极上的电催化氧化,研制了一种基于有序介孔碳载金/L-赖氨酸/纳米金复合膜修饰电极分别检测对苯二酚和邻苯二酚的传感器.在最优的实验条件下,该传感器在对苯二酚和邻苯二酚浓度为1×10-6～8×10-4mol·L-1的范围内具有良好的线性关系,检出限分别为3×10-7mol·L-1、7×10-7mol·L-1.     

名山河流域黄壤无机纳米微粒对钙的吸附解吸特征

以名山河流域老冲积黄壤无机纳米微粒为对象,从纳米尺度分析钙的吸附解吸机制对土壤养分状况的影响,并采用等温吸附法和静态解吸法,比较不同土地利用方式下钙的吸附解吸特征差异.结果表明:1)不同土地利用方式土壤无机纳米微粒对钙的吸附解吸量均随钙质量浓度增加而增加,在低质量浓度范围内吸附量增加较快,在高质量浓度范围内增加趋缓,不同土地利用方式下钙的吸附能力从高到低为水田(2 580.69 mg/kg)、茶园(2 452.30 mg/kg)、旱地(1 935.10mg/ks)、林地(1 867.36mg/kg)、果园(1 520.65 mg/kg),土壤无机纳米微粒对钙的解吸率从大到小为果园、林地、旱地、茶园、水田,且解吸率随外加钙质量浓度增加而增大;2)去除土壤组分(有机质、游离氧化铁)后,无机纳米微粒对钙的吸附量及解吸量均有所增加,5种土地利用方式吸附增加量从大到小为水田、旱地、茶园、林地、果园;3)去除土壤组分前后,无机纳米微粒对钙的等温吸附均以Freundlich方程拟合效果最佳,相关系数在0.954 5～0.989 0,达到极显著水平,Langmuir方程与Temkin方程拟合效果不佳.研究表明,钙离子以非专性吸附为主,专性吸附为辅,有机质和游离氧化铁的存在会阻碍土壤对钙的吸附及解吸.     

Simultaneous photocatalytic treatment of Cr(VI), Ni(II) and SDBS in aqueous solutions: Evaluation of removal efficiency and energy consumption

Simultaneous photocatalytic reduction of poisonous Cr(VI) and Ni(II) ions, coupled with photocatalytic oxidation of sodium dodecyl benzene sulfonate (SDBS) were studied with a trace amount of commercial titania nanoparticles and by means of a direct-photo-irradiation reactor. The co-presence of metal ions and SDBS causes metal ions reduction as well as SDBS oxidation to enhance and energy efficiency to improve. XRD, XPS and FTIR analysis were used to characterize TiO₂ particles before and after usage with the aim of evaluating the mechanism of reactions. The effect of major operating parameters, pH and temperature, was investigated. Under conditions of [Cr(VI)]₀ = [Ni(II)]₀ = 5 mg/L, [SDBS]₀ = 10 mg/L, [TiO₂] = 40 mg/L, pH 6 and T = 35 °C; the removal efficiencies of 55.4%, 71.2% and 57.2% were obtained, respectively, for Cr(VI) and Ni(II) reduction, as well as for SDBS oxidation, after 110 min operation. The relevant kinetic model jointed with the Arrhenius equation was introduced. Pseudo-first-order reactions are relevant. Energy consumption (electrical and thermal) evaluations revealed that operations at higher temperatures provide significant cost reduction. Meantime, a criterion was proposed for a consistent assessment of this kind of processes.     

Zero-valent iron nanoparticles in treatment of acid mine water from in situ uranium leaching

Acid mine water from in situ chemical leaching of uranium (Straz pod Ralskem, Czech Republic) was treated in laboratory scale experiments by zero-valent iron nanoparticles (nZVI). For the first time, nZVI were applied for the treatment of the real acid water system containing the miscellaneous mixture of pollutants, where the various removal mechanisms occur simultaneously. Toxicity of the treated saline acid water is caused by major contaminants represented by aluminum and sulphates in a high concentration, as well as by microcontaminants like As, Be, Cd, Cr, Cu, Ni, U, V, and Zn. Laboratory batch experiments proved a significant decrease in concentrations of all the monitored pollutants due to an increase in pH and a decrease in oxidation-reduction potential related to an application of nZVI. The assumed mechanisms of contaminants removal include precipitation of cations in a lower oxidation state, precipitation caused by a simple pH increase and co-precipitation with the formed iron oxyhydroxides. The possibility to control the reaction kinetics through the nature of the surface stabilizing shell (polymer vs. FeO nanolayer) is discussed as an important practical aspect.     

Aggregation and ecotoxicity of CeO₂ nanoparticles in synthetic and natural waters with variable pH, organic matter concentration and ionic strength

The influence of pH (6.0-9.0), natural organic matter (NOM) (0-10 mg C/L) and ionic strength (IS) (1.7-40 mM) on 14 nm CeO₂ NP aggregation and ecotoxicity towards the alga Pseudokirchneriella subcapitata was assessed following a central composite design. Mean NP aggregate sizes ranged between 200 and 10000 nm. Increasing pH and IS enhanced aggregation, while increasing NOM decreased mean aggregate sizes. The 48 h-E_rC20s ranged between 4.7 and 395.8 mg CeO₂/L. An equation for predicting the 48 h-E_rC20 (48 h-E_rC20 = −1626.4 × (pH) + 109.45 × (pH)² + 116.49 × ([NOM]) − 14.317 × (pH) × ([NOM]) + 6007.2) was developed. In a validation study with natural waters the predicted 48 h-E_rC20 was a factor 1.08-2.57 lower compared to the experimental values.     

Transport of copper as affected by titania nanoparticles in soil columns

The effects of TiO₂ nanoparticles on the transport of Cu through four different soil columns were studied. For two soils (HB and DX), TiO₂ nanoparticles acted as a Cu carrier and facilitated the transport of Cu. For a third soil (BJ) TiO₂ nanoparticles also facilitated Cu transport but to a much lesser degree, but for a fourth soil (HLJ) TiO₂ nanoparticles retarded the transport of Cu. Linear correlation analysis indicated that soil properties rather than sorption capacities for Cu primary governed whether TiO₂ nanoparticles-facilitated Cu transport. The TiO₂-associated Cu of outflow in the Cu-contaminated soil columns was significantly positively correlated with soil pH and negatively correlated with CEC and DOC. During passage through the soil columns 46.6-99.9% of Cu initially adsorbed onto TiO₂ could be “stripped” from nanoparticles depending on soil, where Cu desorption from TiO₂ nanoparticles increased with decreasing flow velocity and soil pH.