环氧乙烷生产装置的安全分析与评价

综合运用道化学公司火灾、爆炸危险指数评价法,事故树分析以及事件树分析对环氧乙烷生产装置进行安全评价,定量地得出装置的危险程度,定性地分析了各危险因素的大小以及系统中各元件的故障率对事故发生概率的影响程度,并提出了改进措施.结果表明,该装置的危险程度很大,必须加强安全生产管理,采取有效措施控制氧气的浓度,从而降低危险性等级,保证生产安全.     

轧钢污泥综合利用的技术研究

阐述了一种轧钢污泥的回收处理技术,该技术可把轧钢污泥有效地分离成氧化铁粉和混合油,实现综合利用,减少铁素资源浪费,有良好的经济效益和环境效益.     

Exigency for fusion of graphene and carbon nanotube with biomaterials

Biomaterial industry is a widely growing field that is closely related to advanced materials. With development in fabrication techniques new materials are being created by researchers daily. The currently used biomaterials for biomedical applications have some limitations. This review examines those limitations such as corrosion, short fatigue life, less wear resistance, and inadequate mechanical properties. These limitations may lead to adverse effects. To overcome these limitations carbon-based nanomaterials may be incorporated such that these biomaterials reach the level of ideal biomaterials. Upgrade of biomaterials with graphene and carbon nanotubes (CNTs) needs to be done only after checking the safety profile of these materials. Biocompatibility of functionalized graphene and CNT is found to be adequate for the use in many applications such as drug delivery, biosensing and imaging, cancer therapeutics, and tissue regeneration whereas pristine graphene and CNT may produce adverse effects. The potential of carbon-based nanomaterials and graphene (and its derivatives) in overcoming those limitations and enhancing biological activities of ongoing biomaterials by acting as composites and coating material is examined. In addition, nanomaterials employ new techniques in biomedical application such as cancer therapy for more efficient results.     

One-pot preparation of graphene oxide magnetic nanocomposites for the removal of tetrabromobisphenol A

A simple solvothermal method was used to prepare monodisperse magnetite (Fe₃O₄) nanoparticles attached onto graphene oxide (GO) sheets as adsorbents to remove tetrabromobisphenol A (TBBPA) from an aqueous solution. These Fe₃O₄/GO (MGO) nanocomposites were characterized by transmission electron microscopy. The adsorption capacity at different initial pH, contact duration, and temperature were evaluated. The kinetics of adsorption was found to fit the pseudo-second-order model perfectly. The adsorption isotherm well fitted the Langmuir model, and the theoretical maximum of adsorption capacity calculated by the Langmuir model was 27.26 mg?g^-1. The adsorption thermodynamics of TBBPA on the MGO nanocomposites was determined at 303 K, 313 K, and 323 K, respectively. The results indicated that the adsorption was spontaneous and endothermic. The MGO nanocomposites were conveniently separated from the media by an external magnetic field within several seconds, and then regenerated in 0.2 M NaOH solution. Thus, the MGO nanocomposites are a promising candidate for TBBPA removal from wastewater.     

Effects of nanoparticles on Daphnia magna population dynamics

Spherical TiO₂ nanoparticles (npTiO₂) were prepared by controlled hydrolysis of tetraethoxy orthotitanate under a nitrogen atmosphere. ZnO nanoparticles (npZnO) were prepared using hydrothermal methods. The crystal structure, chemical, thermal and morphological properties of npZnO and npTiO₂ were characterised using Fourier Transform Infrared Spectrometer, enery-dispersive X-ray spectroscopy, X-ray diffraction, and scanning electron microscope techniques. The short- and long-term experiments were started with neonates taken from the same culture and laboratory condition. In the acute experiments, npTiO₂, npZnO, and cocktail concentrations were applied. 96h-LC₅₀ values were 1.8, 0.7, and 0.1?mg?L^?1, respectively (p?<?.05). For the chronic experiments, different npTiO₂ concentrations were performed. 21d-LC₅₀ value was 1.0?mgL^?1 (p?<?.05). Morphometry became progressively worse in concentrations of more than 1?mgL^?1 npTiO₂. Neonate and young individuals were more sensitive to death because of their low tolerance. This result was affected by population progeny and growth rates (p?<?.05). While control and 0.5?mgL^?1 npTiO₂ groups were determined as growing population, 1.5 and 2?mgL^?1 npTiO₂ groups had decreased population size as R₀ values. Consequently, the relationships between nanoparticle accumulation within Daphnia magna and its population structure and body morphometry for each concentration were important indicators. Its tolerance level to nanoparticles under laboratory conditions reflected its replacement and behaviour in the ecosystem.     

富里酸和胡敏酸对水铁矿转化过程中铁氧化物上铜释放动力学特性的影响

在受重金属污染的土壤中,天然有机质（NOM）和重金属通常会同时参与铁氧化物的转化.但关于这一重要的环境反应过程中重金属释放动力学的研究目前还比较少.为阐明NOM对铁氧化物转化过程中Cu释放行为的影响,本研究使用两种代表性NOM：富里酸（FA）和胡敏酸（HA）,开展了二者存在下的"铁氧化物-重金属-NOM"转化研究,并对转化不同时间点的铁氧化物进行了Cu释放动力学实验.动力学实验中采用了一个流动搅拌装置模拟pH=5.5环境条件下Cu的释放过程.结果表明,Cu的释放量随着铁氧化物的转化而降低,NOM的存在增加了Cu在流动搅拌实验中的释放量.球差校正扫描透射电子显微镜（Cs-STEM）结果显示,铜可以掺入铁氧化物纳米颗粒中,可以有效固定Cu,而FA和HA处理均产生了具有疏松结构的椭球形颗粒,为Cu的吸附提供了丰富的位点.这种疏松的结构导致了更多吸附态Cu的存在,阻碍了铜的掺入,与Cu释放结果一致.因此,Cu释放能力的差异性主要是铁氧化物老化的结果,与Cu和NOM的络合关系不大.这项研究的结果将有助于更好地理解在NOM存在下铁氧化物转化过程中Cu的环境行为,同时在纳米尺度上阐明Cu和C与赤铁矿相互作用的机理.     

两种铁基材料对污染农田土壤砷、铅、镉的钝化修复

制备得到了铁钙（FeCa）和铁锰（FMBO）两种铁基材料,用于钝化修复As、Pb和Cd污染土壤.研究采集了来自绍兴上虞（SY）、广东佛山（FS）、广东韶关（SG）、湖南浏阳（LY）、江西赣州（GZ）、贵州独山（DS）和安徽马鞍山（MAS）的7种重金属污染水稻土（潮泥土）,通过土壤培养试验,研究铁钙材料（FeCa）和铁锰材料（FMBO）对各类土壤溶液中As、Pb和Cd浓度动态变化的影响,对土壤中有效态As、Pb和Cd钝化效果的影响,以及在不同种类土壤中有效态As、Pb和Cd钝化效果差异及影响因素.结果表明,培养过程中,铁基材料处理下土壤溶液中As、Pb和Cd浓度均低于对照处理.研究发现,两铁基材料均能对土壤中As、Pb和Cd起到较好的钝化作用,相同添加量下,铁钙材料对土壤As的钝化效率优于铁锰材料,而材料之间对土壤Pb和Cd钝化效率无显著差异.铁钙材料处理下各种土壤As钝化效果表现为GZ > SG > DS和MAS,土壤铅钝化效果表现为FS>SY、LY和SG>MAS,土壤镉钝化效果表现为SY、GZ和DS>MAS;铁锰材料处理下各种土壤As钝化效果表现为SY、LY和GZ > DS > FS,土壤Pb钝化效果表现为FS > GZ > SY,土壤Cd钝化效果表现为DS > LY > MAS.各种土壤As钝化效率在两铁基材料处理下均与土壤黏土含量呈显著负相关,各种土壤Pb钝化效率在两铁基材料处理下均与土壤pH呈显著正相关,各种土壤Cd钝化效率在铁钙材料处理下与土壤黏土含量显著负相关.总体来看,两铁基材料均适用于各不同种类As、Pb和Cd污染土壤的治理.     

生物炭负载氧化石墨烯对离子型稀土矿区土壤中重金属的阻控效应

以脐橙皮渣和天然石墨为原料,采用改进Hummer-共热解法制备了生物炭负载氧化石墨烯(BGO)材料,利用土壤钝化实验考察了 BGO复合材料对稀土矿区土壤重金属形态的影响,土柱淋溶实验探讨了淋滤液重金属含量变化特征以及土壤重金属垂向迁移规律,确定了淋溶条件下重金属的累积释放模型.结果表明,添加BGO复合材料提高了土壤pH...     

亚热带土壤氮素反硝化过程中N2O的排放和还原

将采集于江西鹰潭的45个发育于不同成土母质和不同利用方式的土壤样本,在密闭、淹水、充N2的严格厌氧条件下进行了28d的培养试验(30℃),在培育过程中,定期测定NO3--N(加入量为200mg·kg-1)含量和培养瓶上部空间N2O的含量变化.实验结果表明,N2O含量(N)随培养时间t的变化可用方程N=A×(1-exp(-k1 t))-B×exp(k2 t)拟合(A表示培养过程中N2O总排放量;B为常数;k1和k2分别为N2O排放速率常数和还原速率常数,拟合值和实测值之间回归方程的决定系数R2=0.84±0.11).不同土壤之间培养期间N2O总排放量(A)的变异可以用培养7d内被反硝化的NO3--N量和N2O排放率(A值与28d内被反硝化的NO3--N总量的百分比)进行解释(R2=0.829,p＜0.01).被反硝化的NO3--N量则主要受土壤有机碳含量或有机氮矿化量控制,N2O排放率则随k2的增大而呈指数下降(p＜0.01).由此可见,在该实验条件下,还原N2O能力强的土壤,在相同量的NO3--N被反硝化的情形下,排放的N2O可能较少.但影响k2值的主要因素还有待进一步研究.     

Studies on solvent extraction of iron(III) as a step for conversion of a waste effluent to a value added product

Solvent extraction of iron(III) from actual sulphate waste pickle liquor was investigated using trialkylphosphine oxide diluted with kerosene. The waste pickle liquor was procured from a local company which deals with the manufacturing of pipes and tubes made of iron and steel. Various parameters were studied to optimise a suitable condition for the maximum extraction of iron. The composition of the aqueous feed used in the experiment was 60.88 g/L Fe(III), 53 g/L acid with traces of Cu, Ni and Co. An ambient extraction at 30 °C yielded acceptable kinetics and loading efficiency for 40% trialkylphosphine oxide with a saturated loading capacity of 51.85 g/L in four contacts at O/A ratio of 1/1 in a multiple contact mode. Iron from the loaded organic was stripped using various strippants such as distilled water, H₂SO₄ and oxalic acid. Since only 32% of loaded Fe could be stripped with 2 M H₂SO₄ in five contacts, further stripping was done with 5% oxalic acid which showed a very promising result. It was found that almost 100% of Fe(III) could be stripped out with 5% oxalic acid at O/A of 1/1 in five contacts.