酸碱改性对氧化铁脱硫剂脱硫性能影响的研究

通过酸碱改性制备了酸式和碱式2种不同表面性质的常温氧化铁脱硫剂,并采用FT-IR技术对其表面酸碱性质和净化硫化氢废气活性进行了研究.结果表明,表面酸碱件质不同的脱硫剂其脱硫反应行为也不同,在脱硫过程中硫化氢氧化生成的硫酸及亚硫酸会影响脱硫剂的表面酸碱性质,造成酸式脱硫剂的表面酸性更强,从而抑制了硫化氢分子在酸式脱硫剂表...     

同步硝化反硝化工艺中DO浓度对N2O产生量的影响

采用序批式生物膜反应器(SBBR),在连续曝气全程好氧的运行条件下,考察不同溶解氧浓度对同步硝化反硝化脱氮性能及N2O产量的影响.控制溶解氧浓度恒定在1、2、2.5和3 mg/L.结果表明,DO为2 mg/L和2.5 mg/L时,氨氮去除率分别为97.9%和98.5%,同步硝化反硝化率均为99%.DO为2 mg/L时,...     

我国中小型锅炉的NOx排放特征与管理对策

对我国中小型燃煤、燃油、燃气锅炉的NOx排放监测数据进行了统计分析,探讨了NOx的排放特征与管理控制现状.研究结果表明:燃煤锅炉中NOx排放质量浓度小于等于400.00 mg/m3的锅炉占76％,NOx平均排放质量浓度为324.60 mg/m3;燃油锅炉中NOx排放质量浓度小于等于400.00 mg/m3的锅炉占84％...     

Formation of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) from a refinery process for zinc oxide used in feed additives: a source of dioxin contamination in Chilean pork

The Republic of Korea found dioxin at concentrations exceeding the Korean maximum residue limit (MRL) in pork (2 pg TEQ g⁻¹ fat) imported from Chile in June 2008. Korea and Chile collaborated and investigated to find out the sources of contamination. An isotope dilution method and high resolution gas chromatography/mass spectrometry (HR-GC/MS) were used for the analysis of PCDD/Fs. PCDD/Fs were found from 2.17 to 36.7 pg TEQ g⁻¹ fat from Chilean pork. 2,3,4,7,8-PeCDF, 1,2,3,4,7,8-HxCDF, 1,2,3,6,7,8-HxCDF, and 2,3,4,6,7,8-HxCDF were found as the major congeners in pork samples. 2,3,4,7,8-PeCDF showed the highest concentration and contributed about 30% among the congeners in most of the samples. 2,3,7,8-TCDD, 1,2,3,7,8,9-HxCDD, OCDD, 2,3,7,8-TCDF, 1,2,3,7,8-PeCDF, 1,2,3,7,8,9-HxCDF, and OCDF were not detected or exist at background levels in the less contaminated samples. Remarkably high concentrations of PCDD/Fs were found in samples of zinc oxide (17 147 pg TEQ g⁻¹), zinc oxide based premix (6673 pg TEQ g⁻¹), and the residue crust (800 pg TEQ g⁻¹) in a mixing chamber in the feed mill. From the results of various investigations, this case concluded that zinc oxide in the feed was the major source of the dioxin contamination in pork. The dioxins were formed from a metal refinery process to collect zinc oxide.     

Ozone-enhanced catalytic oxidation of monochlorobenzene over iron oxide catalysts

In this study, we examined the experimental catalytic oxidation of gaseous monochlorobenzene (MCBz) with O₃ over Fe₂O₃ in a packed bed reactor to investigate the feasibility of economical low temperature decomposition at a high space velocity (SV). We investigated the effects of several reaction parameters (temperature, O₃ concentration, and SV) on the MCBz oxidation. At 150 °C, the conversion of MCBz over Fe₂O₃ in the absence of O₃ was only 3%; it increased to 91% over Fe₂O₃ in the presence of 1200 ppm of O₃ at a high SV of 83 s⁻¹. A long-term operation study revealed that the conversion of MCBz was stable for more than 96 h. In the steady state, the carbon and chlorine balances were 88% and 86%, respectively. Applying a Langmuir-Hinshelwood kinetic model, we estimated an activation energy of 16.7 kJ mol⁻¹ for MCBz oxidation over Fe₂O₃ in the presence of O₃.     

Amendment of arsenic and chromium polluted soil from wood preservation by iron residues from water treatment

An iron-rich water treatment residue (WTR) consisting mainly of ferrihydrite was used for immobilization of arsenic and chromium in a soil contaminated by wood preservatives. A leaching batch experiment was conducted using two soils, a highly contaminated soil (1033 mg kg⁻¹ As and 371 mg kg⁻¹ Cr) and slightly contaminated soil (225 mg kg⁻¹ As and 27 mg kg⁻¹ Cr). Compared to an untreated reference soil, amendment with 5% WTR reduced leaching in the highly contaminated soil by 91% for Cr and 98% for As. No aging effect was observed after 103 d. In a small field experiment, soil was mixed with 2.5% WTR in situ. Pore water was extracted during 3 years from the amended soil and a control site. Pore water arsenic concentrations in the amended soil were more than two orders of magnitude lower than in the control for the upper samplers. An increased release of arsenic was observed during winter in both fields, mostly in the deepest samplers. This is likely due to the formation of a pseudo-gley because of precipitation surplus. Stabilization of arsenic and chromium contaminated soil using WTR is a promising method but the transformation of ferrihydrite in soil proves a concern in case of waterlogged soils. Still the amendment minimized the leaching of arsenic, even in cases of seasonal releases.     

Synthesis of core-shell magnetic molecular imprinted polymer by the surface RAFT polymerization for the fast and selective removal of endocrine disrupting chemicals from aqueous solutions

In this study, we present a general protocol for the making of surface-imprinted core-shell magnetic beads via reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized iron oxide nanoparticles as the chain transfer agent. The resulting composites were characterized by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) analysis, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The surface-imprinted magnetic beads were demonstrated with a homogeneous polymer films (thickness of about 22 nm), spherical shape, and exhibited magnetic property (Ms = 0.41 mA m² g⁻¹) and thermal stability. Rebinding experiments were carried out to determine the specific binding capacity and selective recognition. The as-synthesized surface-imprinted core-shell magnetic beads showed outstanding affinity and selectivity towards bisphenol A over structurally related compounds, and easily reach the magnetic separation under an external magnetic field. In addition, the resulting composites reusability without obviously deterioration in performance was demonstrated at least five repeated cycles.     

Emissions of gaseous nitrogen species from manure management: a new approach

A procedure for the assessment of emissions of nitrogen (N) species (ammonia, nitrous oxide, nitric oxide, di-nitrogen) from the manure management system is developed, which treats N pools and flows including emissions strictly according to conservation of mass criteria. As all relevant flows in the husbandry of mammals are depicted, the methodology is considered a Tier 3 approach in IPCC terminology or a detailed methodology in UN ECE terminology. The importance of accounting for all N species is illustrated by comparing emission estimates obtained using this approach with those obtained from the application the present detailed/Tier 2 methodology.     

Fluoride removal performance of a novel Fe-Al-Ce trimetal oxide adsorbent

A trimetal oxide was developed as a fluoride adsorbent by coprecipitation of Fe(II), Al(III) and Ce(IV) salt solutions with a molar ratio of 1:4:1 under alkaline condition. The material retained amorphous structure and maintained relatively stable fluoride adsorption performance at calcination temperatures lower than 600 degrees C. The optimum pH range for fluoride adsorption was 6.0-6.5 and the adsorbent also showed high defluoridation ability around pH 5.5-7.0, which is preferable for actual application. A high fluoride adsorption capacity of 178 mg g(-1) was acquired under an equilibrium fluoride concentration of 84.5 mg l(-1), adsorbent dose of 150 mg l(-1) and pH 7.0. The adsorption isotherm could be better described by the two-site Langmuir model than the one-site model, suggesting the existence of two types of active sites on the adsorbent surface. Coexistence of high concentrations of phosphate or arsenate only led to partial inhibition of fluoride adsorption, which further suggests the existence of heterogeneous adsorption sites. Sulfate and chloride did not affect fluoride adsorption, and nitrate influenced it only when the concentration of NO(3)(-)-N exceeded 50 mg l(-1). A high desorption efficiency of 97% was achieved by treating fluoride loaded Fe-Al-Ce oxide with NaOH solution at pH 12.2. A column experiment using the adsorbent fabricated into 1mm pellets was performed at an initial fluoride concentration of 5.5 mg l(-1), space velocity of 5h(-1) and pH of 5.8, and 2240 bed volumes were treated with the effluent fluoride under 1.0 mg l(-1).