流态对生物添加强化硝化效果的影响

在15℃、相同氮负荷和添加强度条件下运行SBR和CSTR以对比分析两种典型流态(推流式和完全混合式)对硝化菌添加强化硝化效果的影响.结果表明,添加期间,SBR中氨氧化速率(AUR)和亚硝酸盐氧化速率(NUR)分别为添加前的2.34和2.39倍,停止添加后又分别降为添加前的2.01和1.78倍;添加期间CSTR中AUR和NUR分别为添加前的2.63和2.44倍,停止添加后又分别降为添加前的1.48和1.31倍.荧光原位杂交结果显示,添加期间,SBR中氨氧化菌(AOB)和亚硝酸盐氧化菌(NOB)的个数百分比分别为添加前的2.67和2.71倍,添加停止后,又分别降至原来的2.14和1.95倍;CSTR中AOB和NOB分别为添加前的2.91和1.77倍,但在添加停止后CSTR中AOB和NOB分别降至添加前的1.25和1.50倍.因此,硝化菌添加期间,两种流态的添加效果接近,但是在添加停止后,由于流态对硝化菌中K-决策者(Nitrosospira、Nitrospira)和r-决策者(Nitrosomonas europaea、Nitrobacter)的选择作用,添加的硝化菌在完全混合式条件下比推流式条件下更容易被系统淘汰.     

磷酸盐对亚硝化系统的抑制及恢复

通过接种城镇污水处理厂的污泥,采用连续流反应器启动亚硝化系统并改变进水磷酸盐的浓度,研究了不同磷酸盐浓度对亚硝化系统的影响.结果表明经过14 d的运行,亚硝化系统启动成功,氨氮转化率达到92.2%,亚硝酸盐累积率为73.66%,亚硝酸盐产生速率达到14.42 g·(m~3·d)~(-1).磷酸盐浓度在10~30 mg·L~(-1)时对亚硝化系统的影响并不大;随着磷酸盐浓度持续提高,氨氮转化率在不断降低.当磷酸盐的浓度为80 mg·L~(-1)时,系统的氨氮转化率为13.6%,亚硝酸盐累积率仅18.19%,亚硝酸盐产生速率仅0.54 g·(m~3·d)~(-1),亚硝化反应受到严重抑制.将进水磷酸盐浓度降低到0,经过14 d运行,亚硝化系统获得恢复,且氨氮转化率可以达到80%以上,亚硝酸盐累积率达到86.96%,亚硝酸盐产生速率为15.63g·(m~3·d)~(-1).     

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.     

Simultaneous removal of Cu(II) and Cr(VI) by Mg–Al–Cl layered double hydroxide and mechanism insight

Mg–Al–Cl layered double hydroxide (Cl-LDH) was prepared to simultaneously remove Cu(II) and Cr(VI) from aqueous solution. The coexisting Cu(II) (20 mg/L) and Cr(VI) (40 mg/L) were completely removed within 30 min by Cl-LDH in a dosage of 2.0 g/L; the removal rate of Cu(II) was accelerated in the presence of Cr(VI). Moreover, compared with the adsorption of single Cu(II) or Cr(VI), the adsorption capacities of Cl-LDH for Cu(II) and Cr(VI) can be improved by 81.05% and 49.56%, respectively, in the case of coexisting Cu(II) (200 mg/L) and Cr(VI) (400 mg/L). The affecting factors (such as solution initial pH, adsorbent dosage, and contact time) have been systematically investigated. Besides, the changes of pH values and the concentrations of Mg²⁺ and Al³⁺ in relevant solutions were monitored. To get the underlying mechanism, the Cl-LDH samples before and after adsorption were thoroughly characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. On the basis of these analyses, a possible mechanism was proposed. The coadsorption process involves anion exchange of Cr(VI) with Cl⁻ in Cl-LDH interlayer, isomorphic substitution of Mg²⁺ with Cu²⁺, formation of Cu₂Cl(OH)₃ precipitation, and the adsorption of Cr(VI) by Cu₂Cl(OH)₃. This work provides a new insight into simultaneous removal of heavy metal cations and anions from wastewater by Cl-LDH.     

Capability of cation exchange technology to remove proven N-nitrosodimethylamine precursors

N-nitrosodimethylamine(NDMA) precursors consist of a positively charged dimethylamine group and a non-polar moiety, which inspired us to develop a targeted cation exchange technology to remove NDMA precursors. In this study, we tested the removal of two representative NDMA precursors, dimethylamine(DMA) and ranitidine(RNTD), by strong acidic cation exchange resin. The results showed that pH greatly affected the exchange efficiency, with high removal(DMA 78% and RNTD 94%) observed at pH pk_a-1 when the molar ratio of exchange capacity to precursor was 4. The exchange order was obtained as follows: Ca~(2+) Mg~(2+) RNTD~+ K~+ DMA~+ NH_4~+ Na~+. The partition coefficient of DMA~+to Na~+was 1.41 ± 0.26, while that of RNTD~+to Na~+was 12.1 ± 1.9. The pseudo second-order equation fitted the cation exchange kinetics well. Bivalent inorganic cations such as Ca~(2+)were found to have a notable effect on NA precursor removal in softening column test. Besides DMA and RNTD, cation exchange process also worked well for removing other 7 model NDMA precursors. Overall, NDMA precursor removal can be an added benefit of making use of cation exchange water softening processes.     

潜流人工湿地处理地下水TCE污染实验研究

分别构建无植物、宽叶香蒲和芦苇3组潜流人工湿地系统,研究潜流人工湿地对受到TCE(三氯乙烯)污染地下水的处理效果。实验结果表明:无植物湿地系统和芦苇湿地系统的出水TCE去除率波动较大,香蒲湿地系统出水TCE去除率相对稳定,其出水TCE平均去除率为77.7%,最大值为87.5%,最小值为70.7%。对于无植物湿地系统,湿地床中层和下层的TCE去除率相差较大,而该差异在香蒲和芦苇湿地系统中并不明显。在湿地系统中TCE沿水平方向的降解反应基本符合一级反应动力学模型。     

博斯腾湖西岸表流人工湿地水体脱盐效果研究

针对博斯腾湖日益严重的盐污染问题,以博斯腾湖西岸表面流人工湿地为研究对象,引当地排渠水进入人工湿地,对人工湿地的进水和出水进行连续7个月的水质监测,对比分析进水和出水中8种离子(Ca~(2+)、Na~+、K~+、Mg~(2+)、Cl~-、SO_4~(2-)、CO_3~(2-)、HCO_3~-)和矿化度的变化,结果表明:人工湿地进水含盐量较高,8种离子的浓度和矿化度波动较大,4月和10月进水为微咸水,5—9月进水为咸水,而出水含盐量相对较低,8种离子的浓度和矿化度波动较小,各月出水均为微咸水。经计算分析可知,人工湿地对水体总盐的平均去除率为51%,水体盐分的去除率与温度呈正相关,且随季节性温度变化而发生变化。     

一种多介质层波形潜流人工湿地处理重污染河水试验

我国河流污染严重,城市黑臭水体的比率日益增加。人工湿地作为一种高效低耗能的绿色处理技术,已被广泛应用于污染河水的治理。通过对比分析分层装填复合填料的多介质层波形潜流人工湿地和单一砾石填料的普通人工湿地处理重污染河水的效果,研究了特种基质填料强化脱氮除磷作用以及不同水力负荷条件的影响。试验结果表明:在水力负荷为0.2 m~3/(m~2·d)时,普通湿地对COD、NH3-N、TN和TP的去除率分别达到55.95%、77.85%、39.80%和54.94%;多介质层湿地对COD、NH3-N、TN和TP的去除率分别达到58.52%、75.99%、67.08%和57.31%。在水力负荷为0.5 m~3/(m~2·d)时,普通湿地对COD、NH3-N、TN和TP的去除率分别达到68.46%、90.73%、42.13%和53.70%;多介质层湿地对COD、NH3-N、TN和TP的去除率分别达到69.61%、89.94%、77.58%和68.63%,其脱氮效果明显好于普通湿地。以复合填料包分层装填的波形潜流人工湿地系统具有良好的脱氮除磷效果,有很好的推广应用价值。     

铁炭内电解垂直流人工湿地对污水厂尾水深度脱氮效果

针对污水厂尾水总氮(TN)含量偏高、微生物可利用碳源低的问题,构建铁炭内电解垂直流人工湿地(ICIE-VFCW)装置,研究了ICIE-VFCW对尾水的处理效果,并采用紫外-可见光光谱(UV-VIS)、凝胶过滤色谱(GFC),进一步探讨了ICIEVFCW强化脱氮机制.结果表明,ICIE-VFCW可提高系统对尾水中COD的去除,出水COD可稳定在30 mg·L~(-1)以下,全年、暖季、寒季COD平均去除率较普通垂直流人工湿地分别可提高10.16%、9.81%、11.22%.系统出水TN可维持在10 mg·L~(-1)以下,全年、暖季、寒季TN平均去除率较普通垂直流人工湿地分别提高13.72%、12.90%、16.17%.经过人工湿地处理后,污水中有机物的腐殖度、芳香度及相对分子质量(Mr)均有所下降,且ICIE-VFCW中Mr下降更为明显.湿地基质掺杂铁炭可促进尾水中大分子有机物转化为小分子,为微生物提供更多可利用碳源,从而提高脱氮效率.     

离子交换膜的制备及发展趋势研究

总结当前离子交换膜制备技术的发展状况.从膜的分类及膜性能出发,讨论均相膜及异相膜的差异和今后各自的发展前景,并就提升膜单方面性能(如:选择透过性、离子交换容量、膜电阻、抗氧化性等)的方式进行归纳总结.离子交换膜的改进制备大多从结构上入手,提出今后膜制备的主要研究方向为:深化均相膜制备技术、结合国内成熟的离子交换树脂制备工艺改进异相膜的制备技术.