Validation and application of an analytical method for determining pesticides in the gas phase of ambient air

A method for determining atmospheric concentrations of eight pesticides applied to corn and soybean crops in Mato Grosso state, Brazil is presented. The method involved a XAD-2 resin cartridge coupled to a low volume air pump at 2 L min^?1 over 8 hours. Pesticides were recovered from the resin using sonication with n-hexane:ethyl acetate and determined by GC-MS. Good accuracy (76–128%) and precision (CV < 20%) were obtained for atrazine, chlorpyrifos, alpha- and beta-endosulfan, endosulfan sulfate, flutriafol, malathion, metolachlor and permethrin. Method detection ranged from 9.0 to 17.9 ng m^?3. This method was applied to 61 gas phase samples collected between December 2008 and June 2009. Atrazine and endosulfan were detected both in urban and rural areas indicating the importance of atmospheric dispersion of pesticides in tropical areas. The simple and efficient extraction method and sampling system employed was considered suitable for identifying pesticides in areas of intense agricultural production.     

Novel sampling methods for atmospheric semi-volatile organic compounds (SOCs) in a high altitude alpine environment

High- and low-volume active air samplers as well as bulk deposition samplers were developed to sample atmospheric SOCs under the adverse conditions of a mountain environment. Active sampling employed separate filters for different European source regions. Filters were switched depending on daily trajectory forecasts, whose accuracy was evaluated post hoc. The sampling continued on three alpine summits over five periods of four months. The prevailing trajectories varied stronger between sampling periods than between stations. The sampling equipment (active and bulk deposition) proved dependable for operation in a mountain environment, with idle times being mainly due to non-routine manipulations and connectivity.     

Comparison of Three Pebble Count Protocols (EMAP,PIBO, and SFT) in Two Mountain Gravel‐Bed Streams1

Abstract: Although the term ``pebble count'' is in widespread use, there is no standardized methodology used for the field application of this procedure. Each pebble count analysis is the product of several methodological choices, any of which are capable of influencing the final result. Because there are virtually countless variations on pebble count protocols, the question of how their results differ when applied to the same study reach is becoming increasingly important. This study compared three pebble count protocols: the reach‐averaged Environmental Monitoring and Assessment Program (EMAP) protocol named after the EMAP developed by the Environmental Protection Agency, the habitat‐unit specific U.S. Forest Service’s PACFISH/INFISH Biological Opinion (PIBO) Effectiveness Monitoring Program protocol, and a data‐intensive method developed by the authors named Sampling Frame and Template (SFT). When applied to the same study reaches, particle‐size distributions varied among the three pebble count protocols because of differences in sample locations within a stream reach and along a transect, in particle selection, and particle‐size determination. The EMAP protocol yielded considerably finer, and the PIBO protocol considerably coarser distributions than the SFT protocol in the pool‐riffle study streams, suggesting that the data cannot be used interchangeably. Approximately half of the difference was due to sampling at different areas within the study reach (i.e., wetted width, riffles, and bankfull width) and at different locations within a transect. The other half was attributed to using different methods for particle selection from the bed, particle‐size determination, and the use of wide, nonstandard size classes. Most of the differences in sampling outcomes could be eliminated by using simple field tools, by collecting a larger sample size, and by systematically sampling the entire bankfull channel and all geomorphic units within the reach.     

Estimation of the mean in line intercept sampling

Ratio estimation of the parametric mean for a characteristic measured on plants sampled by a line intercept method is presented and evaluated via simulation using different plant dispersion patterns (Poisson, regular cluster, and Poisson cluster), plant width variances, and numbers of lines. The results indicate that on average the estimates are close to the parametric mean under all three dispersion patterns. Given a fixed number of lines, variability of the estimates is similar across dispersion patterns with variability under the Poisson pattern slightly smaller than varia-bility under the cluster patterns. No variance estimates were negative under the Poisson pattern, but some estimates were negative under the cluster patterns for smaller numbers of lines. Variance estimates become closer to zero similarly for all spatial patterns as the number of lines increases. Ratio estimation of the parametric mean in line intercept sampling works better, from the viewpoint of approximate unbiasedness and variability of estimates, under the Poisson pattern with larger numbers of lines than other combinations of spatial patterns, plant width variances and numbers of lines.     

Analysis of composite sampling data using the principle of maximum entropy

A new tool is presented based on the principle of maximum entropy for enhanced hot spot detection based on composite sampling with no (or minimal) requirement for composite breakdown. The methodology presented here is easy to implement and facilitates the use of multiple criteria for evaluating attainment of site remediation objectives. The new methodology provides very simple decision rules that can easily be used by non-statisticians and complements the use of composites for control of residual mean concentrations.     

基于吸附原理的双路独立汞采样方法

参照美国EPA 30B方法,基于吸附原理,研制了用于燃煤燃烧源排放烟气中总气态汞的双路独立采样系统,结合热解析分析技术,现场测试结果符合30B方法的质控指标要求。建议加大国产吸附管的研制力度,开发适用于中国工况的汞采样器。     

Levels of persistent organic pollutants in the Neretva River (Bosnia and Herzegovina) determined by deployment of semipermeable membrane devices (SPMD)

The main objective of this study was to determine levels of certain persistent organic pollutants (POPs) in Neretva River, Bosnia and Herzegovina (BiH), which is currently facing implementation of the Stockholm Convention on persistent organic pollutants (POPs) and environmental protection strategies. This is the very first report on the deployment of semipermeable membrane devices (SPMDs) in BiH. SPMDs were used for continuous 3-weeks sampling of POPs at three locations, covering 220 km long stream of the Neretva River. Water concentrations of polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs) and polybrominated diphenylethers (PBDEs) were calculated using performance reference compounds (PRCs). The total OCP concentrations ranged from 40 to 140 pg L^?1 and most of compounds were detected only in lower course of the river. Total PAH ranged from 160 to 4000 pg L^?1 and show a clear spatial variation. Dominant PAHs were phenanthrene, fluoranthene, fluorene and acenaphthene. Total PCB ranged from undetectable to 120 pg L^?1. From the group of 15 PBDE congeners investigated, only PBDE-47 and PBDE-99 were detected. Since the concentrations of broad spectrum of POPs found in the Neretva River are quite low, future actions should be focused on preservation rather than on sanitation measures. Regular monitoring should anyhow be established.