UV/Fenton技术处理某工厂高浓度乳化油废水

研究了UV/Fenton技术对高浓度金属清洗乳化油废水的处理效果,考察了亚铁与双氧水浓度、pH、反应时间和搅拌对COD去除效果的影响。实验结果表明,UV/Fenton技术对高浓度乳化油废水(COD平均浓度为35 000 mg/L)具有较高的去除效果,最佳工艺条件为:亚铁与双氧水浓度分别为2 400 mg/L和6 000 mg/L,pH为3,经过2 h反应,COD可降低至1 050 mg/L,去除率为97%。搅拌会降低COD的去除率。研究表明,UV/Fenton技术对高浓度乳化油废水具有很好的降解效果,且药品消耗较低,为目前此类高浓度有机废水的处理提供了技术参考。     

不同种植方式蔬菜中农药残留的差异及污染控制研究

采集了陕西地区不同种植方式的瓜果类、叶菜类蔬菜样品,研究了其中各种农药的残留情况,并分析了农药残留对环境的污染及其控制措施。结果表明:露地种植蔬菜与设施种植蔬菜相比,无论是农药残留检出率还是超标率都略高,两者的农药残留检出率分别为42.0%、36.5%,超标率分别为12.0%、8.2%;叶菜类蔬菜与瓜果类蔬菜相比,无论是农药残留检出率还是超标率都较高,两者的农药残留检出率分别为52.6%、29.6%,超标率分别为17.3%、5.4%;设施种植的瓜果类蔬菜和叶菜类蔬菜的农药残留检出率基本接近,而叶菜类蔬菜的农药残留超标率明显高于瓜果类蔬菜,露地种植的叶菜类蔬菜的农药残留检出率和超标率都远高于瓜果类蔬菜;设施种植蔬菜与露地种植蔬菜相比,甲胺磷、对硫磷、甲基对硫磷、毒死蜱、三氟氯氰菊酯和氰戊菊酯的残留检出率更高;瓜果类蔬菜与叶菜类蔬菜相比,毒死蜱、甲氰菊酯、三氟氯氰菊酯、氰戊菊酯的残留检出率更高;叶菜类蔬菜的农药施用浓度较高,施用农药后要间隔一定时间后再上市销售,并应采用更科学的施药方式,以减少农药在蔬菜中的残留和降低对环境的危害;一方面要开发并积极倡导使用高效、低毒、低残留的无公害农药,另一方面则要开发能够高效、快速降解残留农药的物质,同时还要进行农产品的清洁生产,以提高农产品的安全性,并降低环境中农药的残留危害。     

UASB-SBR-絮凝工艺处理地沟油制生物柴油废水

采用UASB-SBR-絮凝工艺处理地沟油制生物柴油废水,考察了各个阶段的废水处理效果。实验结果表明：UASB稳定运行阶段进水COD约为15000mg/L时,COD去除率约为87%,出水COD在2500mg/L以下,出水挥发性脂肪酸（VFA）浓度为4~6mmol/L,最佳容积负荷为15.0kg/（m3·d）;采用SBR处理UASB出水,当容积负荷为1.5kg/（m3·d）时,出水COD在200mg/L以下,COD去除率在83%以上,ρ（NH₃-N）在5mg/L以下,TP约为25mg/L。向SBR出水中加入质量分数为5%的聚合氯化铝进行化学除磷,加入量为5mL/L,处理后废水TP为4~6mg/L。处理后废水的COD,ρ（NH₃-N）,TP均达到CJ343-2010《污水排入城市下水道水质标准》的A类要求。     

新型吸附材料AGS在油气回收中的应用

考查了自制疏水性硅胶吸附材料AGS在加油站模拟油气回收装置及某油库现场油气回收装置的应用效果,并与常用的柱状活性炭进行了比较。实验结果表明：与活柱状性炭相比,AGS对油气的吸附速率和吸附量较小,但是油气脱附效果更好;将二者混合得到的吸附材料同时具备二者的优点,既具有较高的油气吸附量又具有良好的脱附性能,使油气回收装置具有更大的油气吸附量和更好的回收效果。     

Acute toxicity and ecotoxicological risk assessment of rice pesticides to Lithobates catesbeianus tadpoles

The objective of this study was to determine the acute toxicity of some pesticides used in irrigated rice farming to Lithobates catesbeianus tadpoles. The LC_50-96h for commercial formulations containing bentazon, penoxsulam, vegetable oil, permethrin and carbofuran, separately and their mixtures, were determined at the proportions commonly used in the field. The limits of risk concentrations of these products for the studied species were also established. The LC_50-96h for tadpoles was 4,530 mg L^?1 for bentazon; 7.52 mg L^?1 for penoxsulam + 145.66 mg L^?1 of vegetable oil; 81.57 mg L^?1 for vegetable oil; 0.10 mg L^?1 for permethrin; 29.90 mg L^?1 for carbofuran (active ingredients), and 38.79 times the dose used in the field for the mixture of these products. The environmental risk was determined only for permethrin, and care should be taken when using the vegetable oil.     

Arsenic stabilization by zero-valent iron,bauxite residue,and zeolite at a contaminated site planting Panax notoginseng

Panax notoginseng (Burk.) F.H. Chen, a rare traditional Chinese medicinal herb, is a widely used phytomedicine used all over the world. In recent years, the arsenic contamination of the herb and its relative products becomes a serious problem due to elevated soil As concentration. This study aimed to evaluate the effects of different types and dosages of amendments on As stabilization in soil and its uptake by P. notoginseng. Results showed that comparing to control treatment, the As concentrations of P. notoginseng declined by 49–63%, 43–61% and 52–66% in 0.25% zero-valent iron (Fe(0)), 0.5% bauxite residue, and 1% zeolite treatment, respectively; whereas the biomasses were elevated by 62–116%, 45–152% and 114–265%, respectively. The As(III) proportions of P. notoginseng increased by 8%, 9%, and 8%, and the transfer factors of As from root to shoot increased by 37%, 42% and 84% in the optimal treatments of Fe(0), bauxite residue, and zeolite. For soil As, all the three amendments could transform the non-specifically adsorbed As fraction to hydrous oxides Fe/Al fractions (by Fe(0) and red mud) or specifically adsorbed As fraction (by zeolite), therefore reduced the bioavailability of soil As. With a comprehensive consideration of stabilization efficiency, plant growth, environmental influence, and cost, Fe(0) appeared to be the best amendment, and zeolite could also be a good choice. In conclusion, this study was of significance in developing As contamination control in P. notoginseng planting areas, and even other areas for medicinal herb growing.     

铬渣秸秆共热解产物铬稳定性研究

生物质铬渣共热解工艺是新型的铬渣处理工艺,该工艺能有效地将铬渣中的Cr(Ⅵ)还原为Cr(Ⅲ).而由于共热解产物总铬含量较高,因此考察了铬渣与秸秆共热解过程中铬稳定性.通过考察共热解产物成分及形态分析、pH影响实验、淋洗实验及长期稳定性实验,对共热解铬渣的铬环境安全性进行评估.结果表明:(1)共热解温度对铬渣形态有较大影响,可交换态及碳酸盐结合态铬含量随共热解温度升高而逐渐降低,800℃时候可交换态铬降至＜0.1％(质量分数,下同),碳酸盐结合态铬为1.2％;共热解后最稳定的残渣态铬含量随共热解温度升高而逐渐升高.(2)当pH＞7时,两种共热解产物总铬溶出量极低,基本都小于6mg/kg;当pH≤7时,总铬的溶出量显著增加,最高超过500 mg/kg.但由于解毒铬渣的酸中和能力极强,因此铬释放风险较低.(3)共热解产物的总铬累积溶出量极低,根据拟合结果计算出其100年填埋时间的总铬溶出量不超过1.3 mg/kg.长期稳定性实验表明,自然堆置过程中共热解产物的Cr(Ⅵ)含量逐渐降低.     

木屑处置漏油事故的室内模拟

用锯木屑作为吸附材料,0#柴油为吸附对象进行室内模拟实验,研究了木屑对纯油、水中浮油的吸附以及吸油后的木屑在水中的漂浮性能;并以木屑粒径、木屑投加量、振荡频率、油膜厚度为研究指标,设计了5因素4水平的正交实验,考察了各因素对0#柴油的吸附量、去除率以及木屑漂浮率的影响并对优化条件进行了讨论。结果表明,在实验研究范围内,木屑对水中柴油的吸附速度极快,1min即可达到饱和,饱和吸附量为8．08g／g;木屑在水中漂浮性能良好,静态时经72h漂浮,漂浮率维持在92％左右;振荡频率为150r／min时,72h内漂浮率维持在68％以上;最佳吸油条件组合为吸附剂粒径10～20目,振荡频率120r／min,木屑投加量0．7g,油膜厚度1．65mm。     

油田企业实施环境管理会计制度的必要性

通过对油田企业落实科学发展观、减轻环境压力、促进油田企业自身健康有序发展、寻求国家环境政策的支持、实现可持续发展、提高油田企业国际竞争力等几方面实施原因进行分析,并与传统会计相对比,充分挖掘实施环境管理会计制度的益处,阐述了油田企业建立和实施环境管理会计制度的必要性和紧迫性,强调了油田企业只有实施环境管理会计制度,才能增强企业竞争力,扩大市场份额,减少环境风险,实现企业永续经营。     

胜利油田井下压裂废水处理实验研究

井下压裂施工工艺复杂,压裂废液对环境会造成污染。针对压裂废水特点,采用絮凝-隔油法对其进行预处理,再用次氯酸钠结合紫外光对废水进行深度处理,可氧化降解难处理的部分高分子有机化合物。结果表明,在适宜的处理条件下,该法可有效去除水中CODCr和石油类,去除率分别为98.6%、98.1%,达到《污水综合排放标准》(GB8978—1996)二级标准。