Solid state fermentation of olive mill residues by wood- and dung-dwelling Agaricomycetes: Effects on peroxidase production,biomass development and phenol phytotoxicity

The in vivo conversion of dry olive mill residue (DOR) by wood- and dung-dwelling fungi − Auricularia auricula-judae, Bjerkandera adusta and Coprinellus radians − increases peroxidase secretion up to 3.2–3.5-fold (∼1.3, 3.5 and 7.0 U g⁻¹ DOR for dye-decolorizing peroxidase, manganese peroxidase and aromatic peroxygenases, respectively). The incubation of DOR with these fungi produced a sharp decrease in total phenolic content (100% within 4 wk), a reduction in phytotoxicity as well as a certain degree of plant growth caused by the stimulating effect of fungal-treated DOR. These findings correlate with a characteristic shift in the fragmentation pattern of water-soluble aromatics (detected at 280 nm) from low (0.2, 1.5 and 2.2 kDa, respectively) to high molecular mass (35 to >200 kDa), which demonstrates the presence of a polymerization process. Phenol-rich agricultural residues are a useful tool for enzyme expression and production studies of peroxidase-producing Agaricomycetes which could make DOR a valuable organic fertilizer.     

Uncertainty estimation in the analysis of pesticide residues in olive oil using data from proficiency tests

In this work we report the results for estimating the measurement uncertainty (MU) following up the application of two different approaches, relatively the top-down procedure, by using proficiency test data. We have focused the estimation on the olive oil matrix. We used the analytical data obtained from five selected editions of the Proficiency Tests (PTs, from 2007 to 2011) on pesticide residues in olive oil to estimate the MU. These PTs have been organized by Istituto Superiore di Sanità annually in cooperation with International Olive Council (IOC) since 1997. The number of participants in each trial ranged from 10 to 43. We used a total of 34 pesticide results. The expanded uncertainty U _(c) was calculated using a covering factor k = 2 for a confidence interval of 95%. In the approach 1, the within–laboratory reproducibility standard deviation is combined with estimates of the method and laboratory bias using PTs data. In the approach 2, the way of estimating the MU is based only on the bias that the laboratory has obtained participating in a sufficient number of the IOC proficiency tests. Comparing the relative expanded uncertainty based on these different approaches we notice values quite constant and close, from 42% to 48%. Moreover, these calculated expanded uncertainties are less than the default value of 50% (corresponding to a 95% confidence level), adopted from European guidance document SANCO based on the fit-for-purpose relative standard deviation (FFP-RSD).     

Short-term impact of olive mill wastewater (OMWW) applications on the physico-chemical and microbiological soil properties of an olive grove in Argentina

The purpose of this work was to investigate the effects of spreading olive oil mill wastewater (OMWW) on soil biochemical parameters and olive production in an organically managed olive orchard. The experiment was carried out with three different doses of OMWW (80, 160 and 500 m³ ha^?1) and a control (untreated soil). Three samplings were done at 10, 30 and 90 days after the administration of the byproduct. OMWW application differentially modified the biochemical properties of the soil analyzed. Organic matter, organic carbon, total nitrogen and extractable phosphorus soil contents increased proportionally with each increasing dose. The values of these parameters decreased gradually with time. Total microbial activity was altered and the OMWW 500 m³ ha^?1 treatment proved to be the most active when compared with the other applied doses. OMWW agricultural application also modified the structure of soil microbial communities, particularly affecting Gram positive and negative bacteria, while fungal biomass did not show consistent changes. Although there was a salinity increase in the treated soil, especially at the highest dose, the productive parameters analyzed (fruit and oil tree^?1) were not affected. In light of the obtained results, we consider that low dose of OMWW could be considered an alternative farming practice for semiarid regions.     

Advanced oxidation treatment of physico-chemically pre-treated olive mill industry effluent

In this study, the applicability of physico-chemical methods was investigated for the pre-treatment of the olive mill effluents prior to the discharge into the common sewerage ending with a municipal wastewater treatment plant. The samples were taken from an olive oil industry operated as three-phase process located in Turkey. Various pre-treatment methods including acid craking, polyelectrolyte and lime additions were applied. Advanced oxidation study using Fenton's process was also investigated following pre-treatment by acid cracking and cationic polyelectrolyte. Acid cracking alone gave satisfactory treatment efficiencies and polyelectrolite additions to the acid-cracked samples enhanced treatment efficiency. Since a complete treatment plant is available at the end of the sewer system, results indicated that the effluents of the investigated industry could be discharged into the municipal sewerage in the case of total chemical oxygen demand (COD_tot), suspended solid (SS) and volatile suspended solid (VSS) concentrations according to the Turkish Water Pollution Control Regulation after pre-treatment with 5 ppm anionic polyelectrolyte following acid cracking. The minimum COD_tot, SS and VSS removals were observed when raw wastewater was pre-treated with lime and the discharge standards to the municipal sewer system could not be met. Advanced oxidation with Fenton's process was applied after acid cracking and cationic polyelectrolyte treatment in order to investigate further reduction in chemical oxygen demand (COD) concentration for minimizing the influence of this industrial discharge on the existing municipal wastewater treatment plant. Results indicated that COD_tot removal increased up to 89% from 74% after Fenton's oxidation for the acid cracked samples in which cationic polyelectrolite (10 ppm) was added.     

Bioconversion of wastes from olive oil industries by vermicomposting process using the epigeic earthworm Eisenia andrei

The present work evaluates the possible bioconversion of wet olive cake by low-cost biostabilization (vermicomposting process). Wet olive cake fresh (WOC), precomposted (WOCP), or mixed with biosolids (WOCB), were vermicomposted for 6 months to obtain organic amendments for agricultural and remediation purposes. The results showed initial differences depending on previous treatment. WOCP was initially more stable, presented a low C:N ratio, and showed more dehydrogenase and urease activity. By contrast, there was no dehydrogenase activity initially in WOC and WOCB, due to the presence of some different types of polyphenols. Finally, the end product showed relatively higher amounts of total nitrogen and humic acid and met the standard of quality for composts and vermicomposts for use both in conventional and organic agriculture and soil-restoration programs.     

葡萄酒副产品深度利用的研究进展

介绍了葡萄皮渣、葡萄籽、酒脚的深度利用途径：葡萄皮渣可用于酿酒、酿醋、提取色素和多酚、吸附重金属;葡萄籽可以提取葡萄籽油、葡萄籽蛋白和抗氧化物质;酒脚可以提取酒石酸盐。开展葡萄酒副产品的深度利用,不仅可以获得良好的经济效益,而且可有效减轻环保压力,获得巨大的社会效益。     

Adsorption of dyes onto activated carbon prepared from olive stones

Activated carbon was produced from olive stones（OSAC） by a physical process in two steps. The adsorption character of this activated carbon was tested on three colour dyes molecules in aqueous solution： Methylene blue（MB）, Rhodamine B（RB） and Congo Red（CR）. The adsorption equilibrium was studied through isotherms construction at 30℃, which were well described by Langmuir model. The adsorption capacity on the OSAC was estimated to be 303 mg/g, 217 mg/g and 167 mg/g respectively for MB, RB and CR. This activated carbon has a similar adsorption properties to that of commercial ones and show the same adsorption performances. The adsorption kinetics of the MB molecule in aqueous solution at different initial concentrations by OSAC was also studied. Kinetic experiments were well fitted by a simple intra-particle diffusion model. The measured kinetics constant was influenced by the initial concentration and we found the following correlation： Kid = 1.55 C0^0.51.     

Effect of Fenton pretreatment on anaerobic digestion of olive mill wastewater and olive mill solid waste in mesophilic conditions

The olive mill waste (OMW) generated from olive oil extraction process constitutes a major environmental concern owing to its high organic and mineral matters and acidic pH. Anaerobic digestion (AD) is a main treatment for reducing the organic matter and toxic substances contained in OMW and generating at the same time, energy in the form of biogas. AD of OMW that contains lignocellulose is limited by the rate of hydrolysis due to their recalcitrant structure. This study is devoted to the effect of Fenton process (FP) pretreatment on olive mill wastewater (OMSW) /olive mill solid waste (OMWW) co-digestion to improve their digestibility and in this way the biogas production. The FP pretreatment was performed in batch mode at 25°C, various H₂O₂/[Fe²⁺] ratios (100–1200), catalyst concentration ([Fe²⁺]) ranging from 0.25 to 2 mM, reaction time varying from 30 to150 min, and different pH (3–11). The best performance was obtained with H₂O₂/[Fe²⁺] = 1000, [Fe²⁺] = 1.5 mM, 120 min, and pH 3. Biochemical methane potential (BMP) tests conducted in batch wise digester and at mesophilic conditions (37 °C) showed that cumulative biogas and methane production were higher without FP treatment, and correspond to 699 and 416 mL/g VS, respectively. However, pre-treated OMSW results into an increase of 24% of methane yield. After 30 days of AD, the methane yield was 63%, 54%, and 48%, respectively, for OMSW treated without iron precipitation, with iron precipitation and untreated OMSW sample.     

Yield and quality of charcoals from olive mill residues and its stone and pulp fractions: An enhanced comparative study

Pyrolysis is a promising way to upgrade large amounts of residues from olive oil processing into charcoal. Pyrolysis of the stone and pulp fractions needed to be investigated before conclusions could be drawn. We subjected the olive stone fraction, the pulp fraction, and a mixture of the two to dynamic pyrolysis and isothermal pyrolysis at 360°C. We characterized the charcoals resulting from isothermal pyrolysis at 360°C for different durations in terms of the fixed-carbon content (FCC), carbon content (CC), and high heating value (HHV). We found that charcoal yield from the pulp was higher than that from the stones, which were 38.1% and 32.9%, respectively, after pyrolysis for 360 min. This seemingly unexpected result was due to the high contents of ash (6.22%) and extractives (13%) in the pulp, which remained completely and partially undecomposed, respectively, in the charcoals and are accounted for when calculating yields. However, charcoals obtained from the stones were of higher quality than charcoals from the pulp, with lower ash content and higher FCC, CC, and HHV. In particular, the FCC, CC, and HHV after pyrolysis for 360 min were 73.2%, 74.4%, and 30.2 MJ/kg for the stones and only 61.8%, 63.2%, and 25.9 MJ/kg for the pulp, respectively. Depending on the required quality of the final charcoal, our results help decide whether to pyrolyse the entire olive residues or only one of the two fractions, more likely the stones.     

Complexation parameters of heavy metals by olive mill wastewater determined by a cation exchange resin

Abstract

Complexing parameters in aqueous systems containing heavy metals and wastewater from olive‐oil mill (WOM) have been estimated using a cation exchange resin method. The parameters estimated were the maximum complexing ability (MCA), the stability constant (Kc) and a parameter indicating the stoichiometrical characteristics of the complex (a).

MCA of WOM for Cu, Zn, Pb and Mn was 0.470, 0.314, 0.068 and 0.300 mmol (g WOM)^‐1 respectively, and was related with the ionic radii of the various metal ions. The log Kc values followed the sequence: Cu>Pb>Zn>Mn in agreement with their respective electronegativities. In the case of Cu and Pb, data obtained here was compared with that determined in other work.