Physicochemical substance properties as indicators for unreliable exposure in microplate-based bioassays

In the last years many efforts were made to transform standardized algal test protocols into low-cost microplate assays. While advantages were pointed out frequently, limitations are not systematically addressed, thus hindering a widespread utilisation. In this study a group of organic substances with a wide distribution of volatility (log K_AW from −6.53 to −2.13) and lipophilicity (log K_OW from 1.26 to 4.92) was investigated with respect to the influence of these physicochemical properties on their algal toxicity in different assays. Therefore the EC₅₀ values were determined with a microplate assay based on ISO 8692 protocol and the results were compared with those of an established algal growth inhibition test conducted in air tight glass vessels. Using the ratio of the EC₅₀ values, a clear connection between biological response and volatility as well as lipophilicity of test substances could be detected. Chemicals with a log K_OW higher than 3 or a Henry coefficient log K_AW higher than −4 were identified as less effective in the microplate assay than in the comparative assay. The loss in nominal concentration due to physicochemical properties could be shown to contribute to this using HPLC analysis. Consequently, when using microplate assay’s one should be aware that lipophilic and volatile chemicals might be underestimated in their toxicity, which could be indicated from evaluating related physicochemical properties modelled from structural information prior to an experimental investigation.     

矿区铁路安全管理信息系统的研究

针对我国矿区铁路运输安全管理落后的现状,分析矿区铁路运输安全管理的主要特点,设计了矿区铁路安全管理信息系统的总体结构。以徐沛铁路运输系统为例,基于B/S模式开发了徐沛铁路安全管理信息系统,实现了对职工的安全培训考核、职工安全档案管理、运输事故信息的录入与统计分析、各类安全文档的管理、技术措施的审批和安全直通车的功能。该系统已在徐沛铁路运输安全管理中得到成功应用,也可应用于其他矿区铁路安全管理。     

两种霉菌试验标准的剖析和试验结果的比较

从霉菌试验菌种、试验温湿度对霉菌试验的影响以及实际试验结果的统计方面进行对比分析,探讨分析GJB150.10—86和GJB4.10—83两个霉菌试验军用标准的适用性。     

提高电子元器件使用可靠性的方法

针对实际工作中元器件使用可靠性方面存在的问题．本文通过在实际工作的经验积累和技术研究总结,在电子元器件的选择与检测控制等方面,提出了提高电子元器件使用可靠性的方法。实践证明,这些方法可以直接应用于电子元器件的工程选择与检测控制。     

Laboratory longitudinal diffusion tests: 2. Parameter estimation by inverse analysis

This study focuses on the verification of test interpretations for different state analyses of diffusion experiments. Part 1 of this study identified that steady, quasi-steady and equilibrium state analyses for the through- and in-diffusion tests with solution reservoirs are generally feasible where the tracer is not highly sorptive. In Part 2 we investigate parameter identifiability in transient-state analysis of reservoir concentration variation using a numerical approach. For increased generality, the analytical models, objective functions and Jacobian matrix necessary for inverse analysis of transient-state data are reformulated using unified dimensionless parameters. In these dimensionless forms, the number of unknown parameters is reduced and a single dimensionless parameter represents the sorption property. The dimensionless objective functions are evaluated for individual test methods and parameter identifiability is discussed in relation to the sorption property. The effects of multiple minima and measurement error on parameter identifiability are also investigated. The main findings are that inverse problems for inlet and outlet reservoir concentration analyses are generally unstable and well-posed, respectively. Where the tracer is sorptive, the inverse problem for the inlet reservoir concentration analysis may have multiple minima. When insufficient measurement data is collected, multiple solutions may result and this should be taken into consideration when inversely analyzing data including that of inlet reservoir concentration. Verification of test interpretation by cross-checking different state analyses is feasible where the tracer is not highly sorptive. In an actual experiment, test interpretation validity is demonstrated through consistency between theory and practice for different state analyses.     

FRP加固钢筋混凝土梁的抗剪计算方法

随着利用FRP加固混凝土结构研究的深入和应用的拓展,FRP加固钢筋混凝土梁抗剪性能的研究已取得了丰硕的成果。以往对抗剪承载力的分析大多是基于有效应变即对极限应变进行有效折减的方法,而最近的研究则引入了裂缝处FRP应变分布不均匀系数。在此基础上,本文综合考虑了FRP发挥的最大应变、沿裂缝应变分布的不均性以及斜裂缝倾角对有效应变的影响,提出了等效有效应变的概念,使计算趋于简单和清晰。本文收集了128根FRP全包裹的、以FRP断裂破坏为主的钢筋混凝土梁的抗剪实验数据,通过对主要影响因素的统计分析,建立了等效有效应变简单可靠的计算公式和基于FRP断裂的抗剪承载力设计方法。128根实验梁的抗剪计算结果表明,本文提出的方法简单可行,意义明确,且精度要比已有的建议公式稍高。     

中华鳖出血性肠炎的药物防治研究

对由实验定筛选的中华鳖出血肠炎病病原菌的最佳防治药物为本正交试验的第6组,即A2B3C1,其抑菌圈达21.5mm.临床应用中采用中西结合复方制剂,即用第6组试验药物再加上中药白头翁汤(加减),其疗效更佳.     

地震学综合定量预报方法在华东地区地震预测中的应用研究

本文应用地震学综合定量预报方法,结合区域地震活动特点,在华东地区进行了分区实际预报效能检验.结果表明该方法在华东地区有5个区域通过R值检验,效果较好,有4个区域未能通过R值检验;并对通过检验的区域地震活动趋势进行了分析.     

建筑物基底反力的实时监测与分析

以某大楼的基底反力监测为例 ,阐述了建筑物基底反力实时监测的原理与方法。监测分析结果表明 ,对在建建筑物进行的基底反力实时监测直接反映了土体受力状态 ,可间接得出桩基的受力情况。     

长三角典型城市公交车实际道路细颗粒物排放测试

为研究长三角典型城市公交车细颗粒物排放特征,采用便携式排放测试系统（PEMS）,对上海、杭州和苏州三大城市的8辆典型城市公交车开展实际道路细颗粒物排放实验。研究结果表明：长三角典型城市车辆的实际道路平均车速为22.7 km/h,怠速比例为20.4%,加减速比例为54.5%;在稳态行驶工况下,随车速增大,公交车颗粒物质量及数量排放呈逐渐增大趋势;在20 km/h车速范围内,上海国III、国IV和苏州国III公交车颗粒数浓度呈双峰粒径分布,其他公交车均为单峰分布;随比功率的增大,公交车颗粒质量呈逐渐增大的趋势,国IV公交车颗粒数量呈先下降再增大趋势,国III公交车颗粒数量呈上升趋势;公交车颗粒质量综合排放因子为0.8~189 mg/km,颗粒数量综合排放因子为6.2×10¹²~9.6×10¹⁴#/km。