可靠性技术的发展与应用

本文介绍了可靠性标准体系与参数体系,可靠性的分析与设计方法,可靠性试验的发展趋势,指出可靠性管理是产品可靠性工作的核心,以及提高电子设备可靠性的发展策略。     

体验经济时代下诸葛八卦村古村落旅游产品的创新设计

在体验经济时代,旅游及其产品被赋予了更深的内涵和更高的期待,而在现实旅游开发中却存在很大的不足.在旅游与体验的内在关系分析基础上,根据发生学的序曲、发展、高潮和结尾四部曲方法,结合诸葛八卦村的旅游资源特色,创新设计了诸葛八卦村古村落旅游的行程和活动安排,进行了深度体验型的古村落旅游产品的开发.     

利用活化粉煤灰处理造纸废水的研究

通过正交试验,对粉煤灰处理造纸废水的影响因素进行了研究。研究结果表明：对粉煤灰进行活化,能增加其对造纸废水COD的去除效果;最佳的试验设计方案为：粉煤灰经40％硫酸活化、粒度160—200目、投加量为30g／100ml;影响COD去除率的大小顺序为：投加量影响最大,粒度次之,活化方式影响最小。     

1000MW机组电除尘器的设计及技术改进

介绍了1000MW机组电除尘工程的特点及其电除尘器的设计难点,针对1000MW机组电除尘器设计中的诸多不利因素提出了具体的改进措施。     

Process design optimization and risk analysis

Hazard identification and risk assessment are key aspects in process plant design. They are often applied in the final stages of the process at whatever the cost, unless financial constraints are imposed. However, a much better solution would be to introduce risk analysis earlier by including it in earlier stages of the design process, such as when the cost of a plant and the cost of any accidents that may occur are estimated. In this paper, an optimization methodology is proposed, in which both cost and risk (with a deterministic approach) are taken into account, to improve on the current situation. If a decision variable is chosen, an objective function will be established that makes it possible to analyze variations in overall costs, including the cost of the investment and the cost of accidents. This leads to an optimum situation in which costs are kept to a minimum. Of course, this optimization is subject to constraints, the greatest of which is the fact that risk must not exceed tolerated threshold levels. The procedure is explained and two examples, one involving a toxic release and the other a BLEVE/fireball, are used to illustrate it.     

信息可视化在化工企业水环境安全影响评价中的研究及应用

运用data system.exe技术,对水环境评价系统功能模块进行设计;提出水环境影响评价信息可视化软件的设计方法;建立水环境污染因子数据信息可视化软件,并应用该软件对石油化工企业的水环境进行了初步的风险评价。结果表明:该软件能在识别污染因子数据信息的同时生成与之相匹配的直观的模拟环境图像,有助于管理者进行及时分析与决策;通过输入水环境污染因子监测值后,系统可以自动判定环境的污染的程度,并把对应环境质量的级别、环境的安全程度以及污染对人体与生物的影响程度在图中显示出来,能够有效地提高环境影响评价的可靠度;评价示意图中的评价因子可以根据需要进行增加或更换,有助于该系统的推广应用,建立的环境污染因子数据信息可视化模型具有很强的适用性。     

中国地质调查局安全生产管理平台方案探讨

安全生产管理平台是中国地质调查局为应对日益严峻的地质调查安全生产形势,加强地质调查安全生产监管而开发的一套软件系统,涵盖了安全管理工作的大多数内容,并具有信息处理、数据记录、文档管理、统计查询等功能。文章从系统目标、系统设计、主要功能模块等几方面分析了安全生产管理平台设计方案。建议加快安全生产管理平台研发速度,提高我国地质调查安全生产管理水平。     

Limits of ecodesign: the case for open source product development

Abstract

In pursuit of coping mechanisms for the challenges of sustainable manufacturing, systematic methods have been developed to allow engineers to improve the ratio between products’ utility and environmental impact. These necessary efforts remain however limited if the surrounding production and consumption practices are not called into question at the same time. This article introduces open source product development as a potential approach for unlocking the limits of existing sustainable product design practices and to lead towards alternative and eco-efficient production and consumption practices termed as participative production. First, it discusses the potential advantages of this emerging practice in terms of environmental sustainability. Second, it provides a screened qualitative environmental analysis of 18 exemplary open source hardware products. Specific sustainable design principles implemented by these products are highlighted and discussed in order to identify challenges for further common research in the field of open source and sustainable product development.     

Evaluating soundscape intentions in landscape architecture: a study of competition entries for a new cemetery in Järva,Stockholm

While soundscape is increasingly acknowledged within landscape planning and design discourse, there is little research that clarifies how soundscapes are actually dealt with in landscape architecture practice – partly owing to methodological insufficiencies. This paper, therefore, describes a model for evaluating soundscape treatment in landscape design proposals, focusing on three key aspects. With the dual aim of testing the model, and learning more about how soundscape is approached in practice, the paper spotlights a major design competition for a new cemetery in Sweden. The model proved fruitful and easy to apply. It showed that only limited attention was paid to soundscape in the competition as a whole, and was a useful means of pinpointing proposals where soundscape was fully considered as a design feature; one competition entry that did so is described in the paper. Discussions cover design practice, trends in the competition and model application.     

Adsorption of chlorpyrifos,penconazole and metalaxyl from aqueous solution by modified clays

Sorption of three pesticides (chlorpyrifos, metalaxyl and penconazole) has been measured on a commercial clay montmorillonite and on the same mineral modified with either of two cationic-surfactant micelles. Both micelle–clay complexes, commercial names Cloisite 20A and Cloisite 30B, showed a good capacity to sorb all three pesticides from water, whereas their sorption on the natural montmorillonite was not described by an isotherm. Modelling sorption on both micelle–clay complexes showed that the Freundlich sorption constant (K _F) was higher for chlorpyrifos on Cloisite 20A (K _F = 7.76) than on Cloisite 30B (K _F = 5.91), whereas the sorption of metalaxyl was stronger on Cloisite 30B (K _F = 1.07) than on Cloisite 20A (K _F = 0.57). Moreover the micelle–clay complex Cloisite 20A also showed a good affinity for penconazole, the maximum quantity adsorbed (q _m) of 6.33 mg g^?1 being 45% more than that on Cloisite 30B. Single-batch adsorption of each pesticide onto both micelle–clay complexes was studied using the Freundlich isotherm for chlorpyrifos and metalaxyl and the Langmuir isotherm for penconazole. The Cloisite 20A micelle–clay complex was predicted to require 23% less adsorbent to treat certain volumes of wastewater containing 30 mg L^?1 chlorpyrifos, 43% more to treat metalaxyl similarly and 57% less to treat penconazole compared with Cloisite 30B.