外浮顶罐充氮管网设计及有效性试验验证

为了预防外浮顶罐密封圈雷击火灾,提出在密封圈内充入氮气的保护方法.将安全含氧量作为充氮的惰化目标,对外浮顶罐充氮管网进行设计,并通过试验来验证充氮管网的有效性.试验得到了充氮流量、进出气孔数量及管径与有效充氮时间的关系.若以142 m3/h的流量对容量为10×104 m3的外浮顶罐密封圈内充氮,则46.5 min内可以达到充氮惰化目标.雷电预警时间为60 ～ 90 min的条件下,充氮时间小于预警时间,表明所设计的管网是有效的.     

危险品运输网络优化设计研究综述

为分析当今反恐新形势下的危险品运输网络优化设计问题的研究现状,系统总结国内外关于一般场景和恐怖袭击威胁2种情况下危险品运输网络优化设计研究的主要模型和方法,梳理两者现有的研究内容,并讨论其共性及恐怖袭击威胁情景下的研究的新特点。结果发现:目前关于解决危险品运输网络优化设计问题模型的鲁棒性研究较为缺乏,尤其是模型在更为复杂和不确定性更强的恐怖袭击情景中适用性不强;危险品运输的鲁棒优化模型即使在突发事件条件下,也可以使决策者能够作出相对满意的决策;鲁棒性危险品运输网络能够规避风险扰动,可用来防止在恐怖袭击中因危险品车辆爆炸等造成更大的危害。     

Evaluating Alternative Temporal Survey Designs for Monitoring Wetland Area and Detecting Changes Over Time in California

Evaluation of wetland extent and changes in extent is a foundation of many wetland monitoring and assessment programs. Probabilistic sampling and mapping provides a cost‐effective alternative to comprehensive mapping for large geographic areas. One unresolved challenge for probabilistic or design‐based approaches is how best to monitor both status (e.g., extent at a single point in time) and trends (e.g., changes in extent over time) within a single monitoring program. Existing wetland status and trends (S&T) monitoring programs employ fixed sampling locations; however, theoretical evaluation and limited implementation in other landscape monitoring areas suggest that alternative designs could increase statistical efficiency and overall accuracy. In particular, designs that employ both fixed and nonfixed sampling locations (alternately termed permanent and temporary samples), termed sampling with partial replacement (SPR), are considered to efficiently and effectively balance monitoring current status with detection of trends. This study utilized simulated sampling to assess the performance of fixed sampling locations, SPR, and strictly nonfixed designs for monitoring wetland S&T over time. Modeled changes in wetland density over time were used as inputs for sampling simulations. In contrast to previous evaluations of SPR, the results of this study support the use of a fixed sampling design and show that SPR may underestimate both S&T.     

基于BP神经网络优化制备Cu-Ce/TiO_2及其光催化活性研究

采用Cu和Ce对TiO2进行改性,基于正交实验设计和BP神经网络研究了Cu-Ce/TiO2中Cu-Ce对TiO2的摩尔百分数、Cu-Ce/TiO2中CuCe摩尔比及Cu-Ce/TiO2烧结温度对Cu-Ce/TiO2光催化降解甲醛溶液性能的影响.同时,对Cu-Ce/TiO2制备方案进行了优化,并运用X射线衍射仪、扫描电子显微镜和紫外-可见分光光度计对最佳条件下制备的Cu-Ce/TiO2进行表征.结果表明,优化的制备条件为Cu-Ce/TiO2中Cu-Ce对TiO2的摩尔百分数为2.88%,Cu-Ce/TiO2中Cu-Ce的摩尔比为1∶1,Cu-Ce/TiO2的烧结温度为570℃.共掺杂Cu离子和Ce离子能有效避免掺杂TiO2晶格内部表层和近表层产生较多的位错,从而抑制晶格畸变增大;诱导TiO2中锐钛矿型晶体向金红石型晶体转变的能力增强,有效抑制电子-空穴对的复合,产生介电局域效应.     

基于Matlab分析的台阶式场地平整方案优化设计

在某市餐厨垃圾处理厂场地平整设计中,利用Matlab软件对台阶式场地平整方案进行优化设计,即在Auto CAD环境下用等高线法计算各级台阶的土方量,用Matlab软件拟合出台阶设计高程和土方量的函数关系式,在约束条件下求解,得到了最优设计高程和基于土方挖填平衡条件下场地平整的最小土方工程量,为工程总平面布置提供优化方案。其分析设计方法可为工业企业台阶式场地的总平面布置设计提供借鉴。     

下凹式绿地在降雨径流控制中的应用研究

下凹式绿地具有蓄渗雨水、削减洪峰流量、净化雨水、防止土壤侵蚀等优点,且投资少,是一种能同时满足环境、生态、经济等多重效应的新型雨水利用措施;它的应用将有效缓解城市水资源匮乏和降雨地表径流造成的面源污染,同时能在一定程度上防止城市内涝.在介绍下凹式绿地对降雨径流控制的基础上,着重综述了下凹式绿地对雨水的蓄渗、净化作用及其设计方面的研究进展.     

基于SPEI的云南中部区域干旱时空变化特征分析

利用云南中部地区1961~2010年逐月降水和气温资料,采用降水距平百分率和历史旱情资料验证了标准化降水蒸散指数(Standardized Precipitation Evapotranspiration Index,SPEI)在该地区的适用性,并采用Mann-kendall突变检验、Morlet小波和经验正交函数(Empirical Orthogonal Function,EOF)等方法,分析了该地区干旱的时空演变特征,结果表明:(1)SPEI与降水距平百分率在时空上具有很好的相关性,验证了SPEI对降水变化的敏感性;(2)SPEI指数与历史旱情资料比较吻合,能够有效地反映云南中部区域的干旱特征;(3)年均SPEI呈波动下降趋势,干季SPEI降低趋势明显。年均SPEI存在着24a的主周期和9a的次周期,并于1977年发生了突变,此后开始降低,在整体上呈现出干旱化的趋势;(4)从SPEI的空间分布特征来看,其在整体上受大尺度气候系统的影响表现出一致的下降趋势,而在区域内部则表现出东南-西北(干热河谷)的反向结构差异。     

Sampling and Mapping a Soil Erosion Cover Factor by Integrating Stratification,Model Updating and Cokriging with Images

Cost-efficient sample designs for collection of ground data and accurate mapping of variables are required to monitor natural resources and environmental and ecological systems. In this study, a sample design and mapping method was developed by integrating stratification, model updating, and cokriging with Landsat Thematic Mapper (TM) imagery. This method is based on the spatial autocorrelation of variables and the spatial cross-correlation among them. It can lead to sample designs with variable grid spacing, where sampling distances between plots vary depending on spatial variability of the variables from location to location. This has potential cost-efficiencies in terms of sample design and mapping. This method is also applicable for mapping in the case in which no ground data can be collected in some parts of a study area because of the high cost. The method was validated in a case study in which a ground and vegetation cover factor was sampled and mapped for monitoring soil erosion. The results showed that when the sample obtained with three strata using the developed method was used for sampling and mapping the cover factor, the sampling cost was greatly decreased, although the error of the map was slightly increased compared to that without stratification; that is, the sample cost-efficiency quantified by the product of cost and error was greatly increased. The increase of cost-efficiency was more obvious when the cover factor values of the plots within the no-significant-change stratum were updated by a model developed using the previous observations instead of remeasuring them in the field.     

高炉出铁场除尘方案研究

某钢铁企业高炉炼铁车间的出铁场在生产过程中产生大量高浓度的烟尘,对厂区的大气环境及周边的环境造成严重污染,同时直接危害了职工的身体健康。通过对整个出铁场除尘工艺系统及通风状况的分析及实际应用情况,总结出了适合该场合的系统除尘方案。     

西藏环境信息化基础建设设计实践

描述了西藏环保厅“西藏自治区环境保护厅环境信息化能力建设项目”前期调研、设计的过程,总结在西藏信息化发展基础差、技术人才少、资金投入紧张、稳定性要求高、信息技术发展迅速等现实情况下基础信息化项目建设前期设计特点,为西藏或其他欠发达地区信息化基础建设项目设计提供参考。