Distribution and ecotoxicological concerns of persistent organic pollutants in sediment from creek ecosystem

In order to study the distribution and ecotoxicological concerns of persistent organic pollutants, grab sediment samples were collected from different locations across Thane creek, India. Analyses of samples were carried out using gas chromatography (GC)–electron capture detector and GC–mass spectrometry techniques. In organochlorine pesticides (OCPs), DDT (1,1,1,-trichloro-2,2-bis(p-chlorophenyl) ethane), DDE (1,1-dichloro-2,2-bis(p-chlorophenyl) ethylene), DDD (1-chloro-4-(2,2-dichloro-1-(4-chlorophenyl)ethyl) benzene) and α, β, and γ conformer of hexachlorocyclohexane (HCH), and 9 polychlorinated biphenyls (PCBs) congeners were analyzed in surface sediment samples. Concentrations of these pollutants in grab sediment samples may indicate their current use and impact on marine ecosystem. Average concentrations of total DDT (including DDD and DDE), HCH, and Σ₉PCBs were found to be 4.9, 12.5, and 2.9 µg kg^?1(dry weight) respectively. High concentrations of OCPs and PCBs were found at discharge locations in creek compared to other locations. Location-wise distribution of OCPs and PCBs indicates their high concentrations at the waste water receiving point. Data were compared for ecotoxicological impacts based on the levels specified in the sediment quality standards of the US Environmental Protection Agency and the Canadian Council of Ministers of the Environment. γ-HCH was found to have maximum potential to induce ecotoxicological impacts.     

Kinetic studies of endosulfan photochemical degradations by ultraviolet light irradiation in aqueous medium

Kinetic studies of endosulfan photochemical degradation in controlled aqueous systems were carried out by ultraviolet light irradiation at λ = 254 nm. The photolysis of (α + β: 2 + 1) endosulfan, α-endosulfan and β-endosulfan were first-order kinetics. The observed rate constants obtained from linear least-squares analysis of the data were 1 × 10^?4 s^?1; 1 × 10^?4 s^?1; and 2 × 10^?5 s^?1, respectively, and the calculated quantum yields (φ) were 1, 1 and 1.6, respectively. Preliminary differential pulse polarographic (DPP) analysis allowed to observe the possible endosulfan photochemical degradation pathway. This degradation route involves the formation of the endosulfan diol, its transformation to endosulfan ether and finally the ether's complete degradation by observing the potential shifts.     

Impact of long-term wastewater irrigation on sorption and transport of atrazine in Mexican agricultural soils

In the Mezquital Valley, Mexico, crops have been irrigated with untreated municipal wastewater for more than a century. Atrazine has been applied to maize and alfalfa grown in the area for weed control for 15 years. Our objectives were to analyse (i) how wastewater irrigation affects the filtering of atrazine, and (ii) if the length of irrigation has a significant impact. We compared atrazine sorption to Phaeozems that have been irrigated with raw wastewater for 35 (P35) and 85 (P85) years with sorption to a non-irrigated (P0) Phaeozem soil under rainfed agriculture. The use of bromide as an inert water tracer in column experiments and the subsequent analysis of the tracers’ breakthrough curves allowed the calibration of the hydrodynamic parameters of a two-site non equilibrium convection-dispersion model. The quality of the irrigation water significantly altered the soils’ hydrodynamic properties (hydraulic conductivity, dispersivity and the size of pores that are hydraulically active). The impacts on soil chemical properties (total organic carbon content and pH) were not significant, while the sodium adsorption ratio was significantly increased. Sorption and desorption isotherms, determined in batch and column experiments, showed enhanced atrazine sorption and reduced and slower desorption in wastewater-irrigated soils. These effects increased with the length of irrigation. The intensified sorption-desorption hysteresis in wastewater-irrigated soils indicated that the soil organic matter developed in these soils had fewer high-energy, easily accessible sorption sites available, leading to lower and slower atrazine desorption rates. This study leads to the conclusion that wastewater irrigation decreases atrazine mobility in the Mezquital valley Phaeozems by decreasing the hydraulic conductivity and increasing the soil's sorption capacity.     

Kinetics of aerobic and anaerobic biomineralization of atrazine in surface and subsurface agricultural soils in Ohio

The purpose of this study was to assess atrazine mineralization in surface and subsurface samples retrieved from vertical cores of agricultural soils from two farm sites in Ohio. The Defiance site (NW-Ohio) was on soybean-corn rotation and Piketon (S-Ohio) was on continuous corn cultivation. Both sites had a history of atrazine application for at least a couple of decades. The clay fraction increased at the Defiance site and the organic matter and total N content decreased with depth at both sites. Mineralization of atrazine was assessed by measurement of ¹⁴CO₂ during incubation of soil samples with [U-ring-¹⁴C]-atrazine. Abiotic mineralization was negligible in all soil samples. Aerobic mineralization rate constants declined and the corresponding half-lives increased with depth at the Defiance site. Anaerobic mineralization (supplemented with nitrate) was mostly below the detection at the Defiance site. In Piketon samples, the kinetic parameters of aerobic and anaerobic biomineralization of atrazine displayed considerable scatter among replicate cores and duplicate biometers. In general, this study concludes that data especially for anaerobic biomineralization of atrazine can be more variable as compared to aerobic conditions and cannot be extrapolated from one agricultural site to another.     

Chitosan/glyphosate formulation as a potential,environmental friendly herbicide with prolonged activity

Although there are many reports on the dangers posed by glyphosate, this herbicide is still one of the most popular and widely used total weed killers. Therefore, great effort should be made to minimize exposure to this herbicide and limit its losses into the environment. The aim of this study was to prepare a new formulation consisted of various molecular weight chitosans with glyphosate and their evaluation toward active substance release, phytotoxicity, and preliminary herbicidal efficiency. The phytotoxicity study of the obtained chitosan/glyphosate formulations was determined based on the Organisation for Economic Co-operation and Development 208 guideline. Among all tested formulations evaluated for phytotoxicity, that containing the highest molecular weight of chitosan was found to be the least toxic, showing simultaneously the most effective herbicidal activity against selected weeds. The release rate of glyphosate from the obtained formulations was dependent on the molecular weight and viscosity of chitosan.     

Effect of Fe (III) on acid degradation of methylparathion

A study was undertaken to determine the transformation kinetic of methylparathion (O, O, -dimethyl O-4 nitrophenylphosphorotioate) in the presence of Fe(III) between pH 2 and 7. The Fe(III) was not electroactive under the conditions used in this study, and polarographic signals were exhibited by methylparathion and main degradation product only. Data suggest that hydrolysis of methylparathion in an acid medium is catalyzed by Fe(III) and the pesticide did not degrade in this medium without this cation. Methylparathion degradation was observed at all the pHs studied and was independent of the predominant chemical form of Fe(III) in the aqueous medium. The reaction was first-order with pH-dependent rate constant (k) values ranging from 3.3 × 10^{? 3} h^{? 1} to 7.0 × 10^{? 3} h^{? 1}. The k values increased as pH decreased, suggesting that Fe(III) acted as an electrophile in the reaction mechanism.     

Pesticide residues in Italian Ready-Meals and dietary intake estimation

The investigations carried out during 2005 by state-run Italian laboratories within the framework of controls seeking pesticide residues monitoring in foodstuffs involve quantifying the levels of such residues in fruit and vegetable produce and their processed products: oil, wine and fruit juices. The Italian Ready-Meal Residue Project, promoted by the pesticides working group of Italian Environmental Agencies, seeks to asses the quantity of pesticides in pre-prepared (ready-to-eat) lunches (comprising a first course, side dish, fruit, bread and wine), and to quantify the amounts consumed and compare with the acceptable daily intake ADIs.The data provided by 16 laboratories which analyzed 50 complete meals in 2005 (samples taken on 8 February, 26 May, 24 October, 21 December 2005) showed residues in 39 lunches, with an average number of 2.4 pesticides in each meal and a maximum of 10 pesticides. The most frequently found substances were: pirimiphos-methyl (20 times), procymidone (17), pyrimethanil (7), iprodione (7), cyprodinil (7), fenitrothion (6), diphenylamine (6), chlorpyrifos (6), metalaxyl (5) and chlorpyrifos-methyl (5).The distribution of residues among each dish of the meal was also examined, and the results showed that: 77.3% of the residues were present in the fruit, 14.9% in the wine, 3.0% in the main course, 2.8% in the bread and 2.1% in the side dish. Assuming that two meals are consumed per day, the daily intake of pesticide residues was calculated on a daily basis, in relation to normal body weight (60 kg for an adult, 40 kg for a teenager, 20 kg for a child) and compared with the ADI values established by the European Union. In the case of adults, the average daily intake of pesticides in relation to ADI was 2.6% with a maximum of 73.3%; for teenagers it was 4.9% with a maximum of 109% and for children it was 9.8% with a peak of 219%.     

Multiresidue analysis of organophosphate and pyrethroid pesticides in duplicate-diet solid food by pressurized liquid extraction

An analytical method was developed for determining organophosphate pesticides (OPP) and pyrethroid pesticides (PYR) in duplicate-diet solid food. The method consisted of pressurized liquid extraction (PLE) with dichloromethane followed by cleanup with gel permeation and solid phase extraction columns and gas chromatography/mass spectrometry (GC/MS) analysis. Quantitative recoveries (73–117 %) of the target pesticides were obtained for spiked duplicate-diet food samples. The percent standard deviation (% RSD) of replicate food samples was within ± 20 %. Another method was developed for determining a common OPP metabolite, 3, 5, 6-trichloro-2-pyridinol (TCP) in duplicate-diet food. The method consisted of a PLE with methanol followed by liquid-liquid partitioning, derivatization, and GC/MS analysis. Recoveries of TCP ranged from 83 to 101 % for spiked duplicate-diet food samples. The % RSD of replicate food samples was within ± 15 %. The results confirmed that these methods are reliable and robust, and that they can be used in routine analysis. In addition, a storage stability study for a common OPP, chlorpyrifos (CPF), in solid food samples was performed. The fortified ¹⁵N-¹³C-labeled CPF was stable over 16 mo storage at ?20° C in the dark. The developed analytical methods were successfully applied to 278 duplicate-diet food samples from preschool children, demonstrating that these methods are robust and suitable for routine analysis in future exposure monitoring studies.     

Influence of surfactant concentration on foliar retention of pesticides used in forestry

Abstract

Aqueous tank mixes of permethrin, fenitrothion, Bacillus thuringiensis (B.t.), diflubenzuron (DFB), and glyphosate containing different amounts of Triton® X‐114, a nonionic surfactant, were prepared. Glyphosate formed clear solutions, permethrin and fenitrothion formed emulsions, DFB and B.t provided suspensions. Emulsion stability of permethrin and fenitrothion increased with increasing surfactant level, while the emulsion drop size decreased.

Foliage of white oak, trembling aspen, white spruce and balsam fir were dipped in tank mixes of pesticides (except B.t.) labelled with ¹⁴carbon. The amount of pesticide retained on foliage was determined by liquid scintillation counting. Foliage was also dipped in non‐radioactive B.t. tank mixes, and the protein retained was determined colorimetrically. With all tank mixes, a direct relationship was observed between the mass of liquids retained on foliage and liquid viscosity. In contrast, the amount of pesticide retained was unaffected by viscosity, but was influenced by emulsion drop size. Initially, the amount of pesticide retained on foliage increased with increasing surfactant concentration. Beyond an optimum surfactant level, the emulsion drop sizes were too small and the emulsions became too stable to allow maximum retention of pesticides on foliage. With the glyphosate solutions, however, no optimum surfactant level was indicated because foliar concentrations continued to increase with increasing surfactant levels.     

西溪湿地底泥中有机氯农药分布特征及风险评价

以西溪湿地为主要研究区域,采集了西溪湿地主要河口的表层和柱状底泥样品,以气相色谱(GC)/电子捕获检测器(ECD)定量测定样品中滴滴涕(DDTs)、六六六(HCHs)的含量,并对其进行生态风险评价.结果表明:(1)西溪湿地底泥样品中DDTs浓度明显比HCHs高.有机氯农药(OCPs)在研究区域内的底泥表层样品中残留呈现...