Control of aliphatic halogenated DBP precursors with multiple drinking water treatment processes: Formation potential and integrated toxicity

The comprehensive control efficiency for the formation potentials(FPs) of a range of regulated and unregulated halogenated disinfection by-products(DBPs)(including carbonaceous DBPs(C-DBPs), nitrogenous DBPs(N-DBPs), and iodinated DBPs(I-DBPs)) with the multiple drinking water treatment processes, including pre-ozonation, conventional treatment(coagulation–sedimentation, pre-sand filtration), ozone-biological activated carbon(O_3-BAC) advanced treatment, and post-sand filtration, was investigated. The potential toxic risks of DBPs by combing their FPs and toxicity values were also evaluated.The results showed that the multiple drinking water treatment processes had superior performance in removing organic/inorganic precursors and reducing the formation of a range of halogenated DBPs. Therein, ozonation significantly removed bromide and iodide,and thus reduced the formation of brominated and iodinated DBPs. The removal of organic carbon and nitrogen precursors by the conventional treatment processes was substantially improved by O_3-BAC advanced treatment, and thus prevented the formation of chlorinated C-DBPs and N-DBPs. However, BAC filtration leads to the increased formation of brominated C-DBPs and N-DBPs due to the increase of bromide/DOC and bromide/DON.After the whole multiple treatment processes, the rank order for integrated toxic risk values caused by these halogenated DBPs was haloacetonitriles(HANs)》haloacetamides(HAMs) haloacetic acids(HAAs) trihalomethanes(THMs) halonitromethanes(HNMs) 》I-DBPs(I-HAMs and I-THMs). I-DBPs failed to cause high integrated toxic risk because of their very low FPs. The significant higher integrated toxic risk value caused by HANs than other halogenated DBPs cannot be ignored.     

Nano-sized Fe2O3/Fe3O4 facilitate anaerobic transformation of hexavalent chromium in soil–water systems

The purpose of this study is to investigate the effects of nano-sized or submicro Fe_2O_3/Fe_3O_4 on the bioreduction of hexavalent chromium(Cr(VI)) and to evaluate the effects of nano-sized Fe_2O_3/Fe_3O_4 on the microbial communities from the anaerobic flooding soil.The results indicated that the net decreases upon Cr(VI) concentration from biotic soil samples amended with nano-sized Fe_2O_3(317.1 ± 2.1 mg/L) and Fe_3O_4(324.0 ± 22.2 mg/L) within21 days,which were approximately 2-fold of Cr(VI) concentration released from blank control assays(117.1 ± 5.6 mg/L).Furthermore,the results of denaturing gradient gel electrophoresis(DGGE) and high-throughput sequencing indicated a greater variety of microbes within the microbial community in amendments with nano-sized Fe_2O_3/Fe_3O_4 than the control assays.Especially,Proteobacteria occupied a predominant status on the phylum level within the indigenous microbial communities from chromium-contaminated soils.Besides,some partial decrease of soluble Cr(VI) in abiotic nano-sized Fe_2O_3/Fe_3O_4 amendments was responsible for the adsorption of nano-sized Fe_2O_3/Fe_3O_4 to soluble Cr(VI).Hence,the presence of nano-sized Fe_2O_3/Fe_3O_4 could largely facilitate the mobilization and biotransformation of Cr(VI) from flooding soils by adsorption and bio-mediated processes.     

结合WRF/Chem和PMF方法的邯郸市PM_(2.5)源解析

<正>向源模型法和反向受体模型法是进行城市PM_(2.5)源解析的2种方法,两者各有所长。该研究应用三维空气质量模型Weather Research and Forecasting Model with Chemistry(WRF-Chem)模型和受体模型Positive Matrix Factorization(PMF),以2014年10月为研究时段,分别对邯郸市的细微颗粒物(PM_(2.5))进行源解析。PMF模型的解析结果表明,邯郸市PM_(2.5)来源为二次源30.2%,燃煤源25.4%、金属冶炼源15.1%、机动车源14.4%、扬尘源9.8%,生物质燃烧源5.2%。应用WRF-Chem模型,Brute-Force方法解析出的结果为,在本地源贡献中,工业源贡献了49.0%,民用源11.9%、农业源9.6%、交通源3.8%和电厂源-1.5%(负值由于PM_(2.5)前体物之间的非线性反应所致)。应用源模型对二次成分(SO_4~(2-)、NO_3~-和NH_4~+)进行再解析,结果显示,燃煤源源贡献率最大,达到25.7%,其次分别为农业源(24.0%)、工业源(6.5%)、生物质源(1.8%)和机动车(0.03%)。结合2种方法得出,邯郸市的PM_(2.5)中,本地燃煤源贡献了37.1%,其次分别为金属冶炼源(18.4%)、机动车源(15.1%)、扬尘源(13.3%)、生物质燃烧源(6.2%)。     

EDTA增强Cr(VI)共存时Burkholderia cepacia降解孔雀绿的效率

重金属共存严重抑制了微生物降解染料的效率,本研究拟采用EDTA螯合Cr提高Burkholderia cepacia C09G降解复合污染中孔雀绿的效率.实验结果表明,0.1 mmol·L~(-1)孔雀绿单独存在条件下,24 h的生物降解率达到96.2%;然而,在0.5 mmol·L~(-1)Cr(VI)共存条件下,60 h的降解率仅为6.7%.当加入0.5 mmol·L~(-1)EDTA螯合剂后,60 h时孔雀绿的降解率提高到18.8%.当EDTA浓度为0.5 mmol·L~(-1)时,最佳螯合Cr(VI)的浓度为0.7 mmol·L~(-1),此时,60 h后孔雀绿的降解率达到35.3%,对Cr(VI)的吸附率为24.6%.此外,通过EDS、SEM、XPS分析证明,EDTA可以减小Cr(VI)的毒性,Burkholderia cepacia C09G可将吸附的Cr(VI)还原为Cr(III).     

我国工业危险废物的来源、处理及监管对策与建议

通过大量环境统计数据的分析,对我国工业危险废物的产生、综合利用、处置和贮存,从行业来源、区域分布进行了分析和总结。结合我国工业危险废物企业自建设施和政府集中处理设施处理情况,对我国工业危险废物的处理和环保监管对策提出了若干建议。     

分子生物学技术在水处理中的应用研究进展

利用现代分子生物学技术对微生物进行分析和研究,以解决传统微生物分析成本高、速度慢、准确度较低和灵敏度较差等缺点。介绍分子生物学技术在水处理中的应用现状,并对未来发展方向提出建议。目前分子生物学技术在供水工程中主要用于水中细菌、病毒、原生动物、蠕虫等病原微生物的快速检测以及管网微生物种群的分析,在污水处理中主要用于脱氮除磷过程菌群数量和空间分布的剖析、污泥膨胀成因分析以及监测微生物种群多样性来优化处理工艺。分子生物学技术的深入研究将进一步促进水行业的发展。     

β-环糊精/醋酸纤维素纳米纤维的制备及对染料废水的处理

制备了不同β-环糊精(β-CD)含量的醋酸纤维素(CA)纳米纤维膜,并对纤维膜的结构形貌、尺寸分布、孔隙率、比表面积以及纤维膜的力学性能进行表征分析。随后研究了不同β-CD含量、初始浓度、吸附时间下,纳米纤维膜对甲基红染料的截留性能和吸附性能。结果表明:过量(≥30%)的β-环糊精会使纳米纤维产生珠节,纤维的形貌和力学性能变差;吸附试验表明,β-CD的加入提高了CA纳米纤维膜对染料的吸附,MR吸附率可达93.48%,最大平衡吸附量可达181.74 mg/g,比纯CA纳米纤维膜提高了将近40%;此外,染料的截留实验表明,纳米纤维膜对染料的截留效果较差,最大截留率为50.35%。     

焙烧温度对CeO_2(ZrO_2)/TiO_2选择性催化脱硝性能的影响

采用溶胶-凝胶法并以不同温度焙烧制备一系列CeO_2(ZrO_2)/TiO_2(CZT)催化剂,考察了CZT催化剂固相结构、酸量、比表面积等性能与催化活性的关系。采用XRD、BET、NH3-TPD、H2-TPR以及XPS等表征技术对催化剂进行表征。结果表明:焙烧温度为450℃时CZT催化剂具有最高的催化活性,其在240~400℃的温度窗口内活性均高于90%,且具有较好的抗水和抗硫中毒能力。随着焙烧温度的提高,催化剂表面的Ce和Zr原子进入体相晶格且Ce0.5Zr0.5O2向Ce0.75Zr0.25O2转变,导致催化剂的储释氧能力和氧化还原性能降低。另外,锐钛矿和金红石型TiO_2晶粒尺寸的增加,催化剂的有效比表面积和总酸量降低,因此CZT催化活性随着焙烧温度的提高而有所降低。换言之,大的比表面积、良好的氧化还原性能、表面Ce4+的富集以及酸性位的增多均有利于NH3-SCR活性的提高。     

地下水循环井技术处理土壤和地下水中甲基叔丁基醚研究

研究了MTBE在砂土中的静态吸附以及采用地下水循环井技术(GCW)去除砂土和地下水中MTBE的衰减规律。结果表明:MTBE在砂土中的吸附动力学符合准二级动力学方程,相关系数R2为0.99618,在砂土中的吸附平衡时间为24 h;吸附热力学符合Linear平衡吸附,吸附系数为0.00306 m3/kg。GCW运行30 h后,地下水饱和含水层中MTBE浓度由500 mg/L降至72.5 mg/L,去除率为85.5%;砂土中MTBE的吸附量由0.93 mg/g降至0.03 mg/g,去除率达96.4%。水平方向距GCW越近,MTBE的去除效率越快,垂直方向位于GCW上部的MTBE优先会被去除,最佳修复时间为运行15 h。GCW对砂土和地下水中高浓度MTBE具有良好的修复效果。     

Effects of sludge retention time, carbon and initial biomass concentrations on selection process: From activated sludge to polyhydroxyalkanoate accumulating cultures

Four sequence batch reactors (SBRs) fed by fermented sugar cane wastewater were continuously operated under the aerobic dynamic feeding (ADF) mode with different configurations of sludge retention time (SRT), carbon and initial biomass concentrations to enrich polyhydroxyalkanoate (PHA) accumulating mixed microbial cultures (MMCs) from municipal activated sludge. The stability of SBRs was investigated besides the enrichment performance. The microbial community structures of the enriched MMCs were analyzed using terminal restriction fragment length polymorphism (T-RFLP). The optimum operating conditions for the enrichment process were: SRT of 5 days, carbon concentration of 2.52 g COD/L and initial biomass concentration of 3.65 g/L. The best enrichment performance in terms of both operating stability and PHA storage ability of enriched cultures (with the maximum PHA content and PHA storage yield (Y_PHA/S) of 61.26% and 0.68 mg COD/mg COD, respectively) was achieved under this condition. Effects of the SRT, carbon concentration and initial biomass concentration on the PHA accumulating MMCs selection process were discussed respectively. A new model including the segmentation of the enrichment process and the effects of SRT on each phase was proposed.