Compound-specific chlorine isotope analysis of polychlorinated biphenyls isolated from Aroclor and Clophen technical mixtures

The combined electrochemical oxidation-solar-light/immobilized TiO₂ film process was conducted to degrade an azo dye, Reactive Black 5 (RB5). The toxicity was also monitored by the Vibrio fischeri light inhibition test. The electrochemical oxidation rapidly decolorized RB5 (55, 110 μM) with a supporting electrolyte of 2 g l⁻¹ NaCl at current density 277 A m⁻² and pH 4. However, TOC mineralization and A₃₁₀ removal were low. Additionally, the treated solution showed high biotoxicity. RB5 at 110 μM significantly retarded the de-colorization efficiency by using the solar-light/immobilized TiO₂ film process. The combined electrochemical oxidation-solar-light/immobilized TiO₂ process effectively increased the removal of color, A₃₁₀, and TOC. The toxicity was also significantly reduced after 3 h of solar irradiation. The results indicated that the low-cost combined process is a potential technique for rapid treatment of RB5.     

用二氧化钛光催化氧化法降低丙烯腈污水中的化学需氧量

在开放的光催化反应器中,以紫外(UV)光为光源,以二氧化钛为催化剂,研究了不同水质条件下对模拟丙烯腈(AN)污水中化学需氧量(COD)的控制效果及主要影响因素。结果表明,UV光-TiO2催化体系对AN污水中COD具有良好的去除效果。当在浓度为300mg/L模拟AN污水中投加浓度为20mg/L的二氧化钛及紫外光照射180min时,污水体系中的COD残存率为7.9%。同时,反应过程中不会对环境产生二次污染。     

流化床TiO_2光催化降解乙醛气体的研究

光催化降解有害气体是一项新兴的颇有发展前途的环境友好催化新技术 ,采用溶胶 -凝胶法制得 1 0～ 30nm的二氧化钛 ,采用自制的流化床光催化气体反应器降解乙醛气体 ,流量 1 0 0mL/min ,乙醛气体浓度 1 .8～ 9mg/m3 ,降解率达到 80 %以上。     

絮凝-光催化处理实际染料废水的研究

采用絮凝-光催化氧化工艺成功地处理了实际染料废水;研究了COD光催化降解动力学。COD和BOD5浓度分别为2169mg／L、295mg／L的染料废水,经絮凝-光催化处理后,出水COD和BOD5分别为214mg／L、18．5mg／L,去除率分别为90．1％、93．7％。向光催化体系中加入H2O2,可促进COD与BOD5的去除。该工艺可处理高浓度染料废水。