Wintertime peroxyacetyl nitrate (PAN) in the megacity Beijing: Role of photochemical and meteorological processes

Previous measurements of peroxyacetyl nitrate(PAN) in Asian megacities were scarce and mainly conducted for relative short periods in summer. Here, we present and analyze the measurements of PAN, O3, NOx, etc., made at an urban site(CMA) in Beijing from 25 January to 22 March 2010. The hourly concentration of PAN averaged 0.70 × 10 9mol/mol(0.23 × 10 9–3.51 × 10 9mol/mol) and was well correlated with that of NO2but not O3, indicating that the variations of the winter concentrations of PAN and O3in urban Beijing are decoupled with each other. Wind conditions and transport of air masses exert very significant impacts on O3, PAN, and other species. Air masses arriving at the site originated either from the boundary layer over the highly polluted N-S-W sector or from the free troposphere over the W-N sector. The descending free-tropospheric air was rich in O3, with an average PAN/O3ratio smaller than 0.031, while the boundary layer air over the polluted sector contained higher levels of PAN and primary pollutants, with an average PAN/O3ratio of 0.11. These facts related with transport conditions can well explain the observed PAN-O3decoupling. Photochemical production is important to PAN in the winter over Beijing. The concentration of the peroxyacetyl(PA) radical was estimated to be in the range of 0.0014 × 10 12–0.0042 × 10 12 mol/mol. The contributions of the formation reaction and thermal decomposition to PAN's variation were calculated and found to be significant even in the colder period in air over Beijing, with the production exceeding the decomposition.     

Characteristics of ozone and ozone precursors (VOCs and NOx) around a petroleum refinery in Beijing, China

A field measurement campaign for ozone and ozone precursors(VOCs and NOx) was conducted in summer 2011 around a petroleum refinery in the Beijing rural region. Three observation sites were arranged, one at southwest of the refinery as the background, and two at northeast of the refinery as the downwind receptors. Monitoring data revealed the presence of serious surface O3 pollution with the characteristics of high average daily mean and maximum concentrations(64.0 and 145.4 ppbV in no-rain days, respectively) and multi-peak diurnal variation. For NOx, the average hourly concentrations of NO2 and NO were in the range of 20.5–46.1 and 1.8–6.4 ppbV, respectively. For VOC measurement, a total of 51 compounds were detected. Normally, TVOCs at the background site was only dozens of ppbC, while TVOCs at the downwind sites reached several hundreds of ppbC. By subtracting the VOC concentrations at background, chemical profiles of VOC emission from the refinery were obtained, mainly including alkanes(60.0% ± 4.3%), alkenes(21.1% ± 5.5%) and aromatics(18.9% ± 3.9%). Moreover, some differences in chemical profiles for the same measurement hours were observed between the downwind sites; the volume ratios of alkanes with low reactivity and those of alkenes with high reactivity respectively showed an increasing trend and a decreasing trend. Finally, based on temporal and spatial variations of VOC mixing ratios, their photochemical degradations and dispersion degradations were estimated to be 0.15–0.27 and 0.42–0.62, respectively, by the photochemical age calculation method, indicating stronger photochemical reactions around the refinery.     

Determination and Evaluation of Cadmium, Copper, Nickel, and Zinc in Agricultural Soils of Western Macedonia, Greece

The objective of this study was to determine the levels of major phytotoxic metals―including cadmium (Cd), copper (Cu), nickel (Ni), and zinc (Zn)―in agricultural soils of Western Macedonia, Greece. We also wanted to determine the possible relationships among elements and between soil properties and elemental concentrations. Surface soil samples, n = 570, were collected and analyzed. The results of the elemental analysis showed that the mean metal concentrations were consistent with reported typical concentrations found in Greek agricultural soils in the cases of Zn and Cu. Cd exhibited lower and Ni higher mean concentrations than the typical levels reported in the literature. Metal concentrations in the majority of the examined samples (>69%) were found to be higher than the respective critical plant-deficiency levels. However, only 0.4% and 0.2% of the analyzed soil samples, respectively, exhibited Cd and Ni concentrations higher than the levels that cause plant toxicity, as referenced by other investigators. These results suggest that the soils studied can be considered as unpolluted with respect to the examined food-chain metal contaminants. However, the levels of the metal concentrations in some of the soil samples, and the low correlation of the metals with soil properties, suggest an anthropogenic rather that lithogenic origin.     

Do nanoparticles present ecotoxicological risks for the health of the aquatic environment?

Nanotechnology is a major innovative scientific and economic growth area, which may present a variety of hazards for environmental and human health. The surface properties and very small size of nanoparticles and nanotubes provide surfaces that may bind and transport toxic chemical pollutants, as well as possibly being toxic in their own right by generating reactive radicals. There is a wealth of evidence for the harmful effects of nanoscale combustion-derived particulates (ultrafines), which when inhaled can cause a number of pulmonary pathologies in mammals and humans. However, release of manufactured nanoparticles into the aquatic environment is largely an unknown. This review addresses the possible hazards associated with nanomaterials and harmful effects that may result from exposure of aquatic animals to nanoparticles. Possible nanoparticle association with naturally occurring colloids and particles is considered together with how this could affect their bioavailability and uptake into cells and organisms. Uptake by endocytotic routes are identified as probable major mechanisms of entry into cells; potentially leading to various types of toxic cell injury. The higher level consequences for damage to animal health, ecological risk and possible food chain risks for humans are also considered based on known behaviours and toxicities for inhaled and ingested nanoparticles in the terrestrial environment. It is concluded that a precautionary approach is required with individual evaluation of new nanomaterials for risk to the health of the environment. Although current toxicity testing protocols should be generally applicable to identify harmful effects associated with nanoparticles, research into new methods is required to address the special properties of nanomaterials.     

聚丙烯腈基活性炭纤维对罗丹明B吸附性能研究

利用扫描电子显微镜（SEM）和比表面分析仪等对聚丙烯腈基活性炭纤维进行表征。考察了吸附动力学、pH值、吸附温度及罗丹明B初始浓度对吸附性能的影响。结果表明,最佳接触时间为140min;在中性条件下,罗丹明B的去除率最低,pH=2.0时达到最大;温度为55℃时,ACFs的吸附效果最好;罗丹明B的去除率随着罗丹明B初始浓度增大而减小。并对材料的吸附机制进行了简要的分析。     

Electrochemical or UV-photochemical oxidation of industrial wastes containing polar aromatic sulphonates

BACKGROUND AND INTENTION: Aromatic sulphonates other than surfactants and their hydroxy and amino-derivatives are important intermediates for the production of azo dyes. Their production on a large scale can be detrimental for the environment, if the by-products of their synthesis are not disposed of appropriately. An industrial waste, the organic components of which were mainly amino and hydroxy-substituted aromatic sulphonates, seriously endangers the environment close to an dismissed Italian industrial site. Inorganic sulphates and chlorides contained in the waste seriously hinder its disposal by incineration, since they corrode furnace walls. In this work, preliminary exploration of aqueous-phase electrochemically and photochemically induced oxidation techniques have been performed as possible alternatives to incineration. METHODS: Electrochemically-induced oxidation was experimented on individual aromatic sulphonates and on an industrial waste by electrolysing them between smooth platinum electrodes at low temperature (5 degrees C) and high current densities (0.4 A/cm2) with aqueous 0.5 M NaHSO4 electrolyte. Photochemically-induced oxidation was performed by irradiating individual aromatic sulphonates or industrial waste with a 500 W mercury lamp in the presence of sodium peroxydisulphate. RESULTS AND DISCUSSION: After 200 min electrodegradation, 90% of the original compounds disappeared, while 50% Total Organic Carbon (TOC) of an industrial waste was removed from solution after 10 hours. After 180 min UV-photodegradation, 90% of two test aromatic sulphonates disappeared, while 65% of TOC of industrial waste was removed after 5 hours. CONCLUSIONS: Two methods, electrochemical and UV-persulphate oxidation of an industrial waste, were used in order to propose a disposal procedure alternative to incineration. Electrodegradation with smooth Pt anode in 0.5 M NaHSO4 at 5 degrees C halved TOC concentration within 10 hours, while persulphate-assisted UV-photochemical oxidation with a 500 W high pressure Hg lamp abated two-thirds of TOC concentration after 5 hours. Energetic consumption of electrodegradation was 0.33 kWh/g TOC, while that of photooxidation was larger than 2 kWh/g TOC. Although both techniques can be considered efficient from a purely chemical point of view, since both are capable of wet-oxidising the aromatic sulphonates and the industrial waste, electrodegradation seems more promising than a photochemical degradation if economical considerations are also taken into account. Considering also that neither cell design nor catalyst were optimised in this preliminary study, the energy yield of electrodegradation seems likely to be largely improved.     

长江三峡花岗岩坡面林地土管特性及其对管流的影响

相互连通具有一定通透性的土壤大空隙称为大孔隙,亦可称其为土管。根据土管成因不同将其分为四种类型,即土壤动物流动导致的土管、植物根系形成的土管、土壤裂隙形成的土管和土壤水分运动形成的土管。在长江三峡花岗岩地区至少存在两种成因的土管,即植物死亡根系形成的（生物性）土管和由土壤裂隙形成的（地质性0土管。由降雨导致水分在土壤大孔隙中的运动过程称为管流,管流是优先流的主要形式之一。管流的产生对于降雨而言具有一定的滞后性（管流开始出现一般较开始降雨时间推迟3－4小时）,管流的产生与降雨强度、降雨量和土壤水力特性等要素有关,相同条件下管流流量和降雨强度及降雨量呈正相关,管流特性不仅与土管的成因有关,而且与土管在土壤剖面的位置也有一定关系。由于土管内部粗糙程度和分枝合流情况不同,土壤前期降雨量、本次降雨强度影响也造成管流的水文过程产生差别。     

The basic properties of poly(lactic acid) produced by the direct condensation polymerization of lactic acid

Poly(lactic acids) with high molecular weights have been synthesized by direct condensation polymerization of lactic acid. These polymers have good mechanical properties and can be processed into products such as cups, film, and fiber, which can be used as compostable materials. This polymerization method can be applied to the synthesis of copolymers of lactic acid and other hydroxyacids. The properties of poly(lactic acid) and copolymers synthesized by the direct process are different from those of polymers obtained by the conventional lactide process.     

Environmental gradients in northwest freshwater wetlands

Wetland environmental characteristics are examined to determine their spatial and temporal relationships. Two very different Oregon freshwater wetlands provided a range of wetland types. Results are evaluated to determine the possible use of environmental characteristics in defining wetlands and their boundaries. Representative physical, hydrological, and edaphic properties were periodically measured in microplots along upland/wetland transects. A multivariate approach is stressed in the data analysis; correlation, cluster analysis, and principal components analyses were used. The results indicate the environmental characteristics change in a quantifiable manner both spatially and temporally. The controlling mechanism is moisture, spatially in terms of the upland/wetland transect and temporally with respect to seasonal response. These changes do not correlate well with vegetation. Several hypotheses are offered as an explanation. Correlation within environmental characteristics is variable but definite patterns are discernible. These data suggest both single and combinations of environmental characteristics that could serve as keys in wetland identification and boundary determination. However, before extensive use is made of this information additional long-term monitoring of wetland environmental characteristics will be required.