活性炭改性研究进展

本文从表面结构特性、表面化学性质和电化学性质 3个方面叙述了国内外在活性炭改性方面的研究进展。表面结构特性改性主要是从增大比表面积和控制孔径分布两方面展开 ,从而增大吸附量 ;表面化学性质改性主要是通过氧化还原改变表面含氧酸性、碱性基团的相对含量以及负载金属改性 ,从而改变对极性、极性较弱或非极性物质的吸附能力 ;电化学性质改性主要是通过加微电场改变活性炭表面的带电性和由此而产生的化学性质的变化 ,从而改变吸附性能。最后 ,本文还从活性炭的吸附性质方面 ,客观地提出了今后发展方向     

Carboxylic acids in the troposphere, occurrence, sources, and sinks: A review

Carboxylic acids are ubiquitous and important components of the troposphere; they are currently measured in different environments. They are thought to have several sources comprising primary biogenic and anthropogenic emissions, hydrocarbons gas-phase oxidations, and some carbonyl compounds aqueous-phase oxidations. In the present review we make a synthesis of the concentrations of low molecular weight carboxylic acids in tropospheric aqueous and gaseous phases and in aerosol particles for different environments. We also successively examine the major sources of carboxylic acids and discuss their relative contribution to tropospheric concentrations for various environments as well as the principal sinks of these compounds.     

土地处理法处理钻探泥浆的土壤特性研究

论述了中国陆上油田的土壤类型，这些土壤的理化性质以及土壤中的微生物种类。采用土地处理法处理废弃泥浆时，一方面，废弃泥浆中的重金属、有机物对土壤会带来负面的影响，如有机质及阳离子的含量升高，含盐量升高，pH升高，土壤的孔隙度降低等；另一方面，微生物降解有机物而形成腐植质，可以改善土壤性质。并且，通过对土壤的改良，可以解决上述的负面影响。最后得出结论，土地处理法处理废弃泥浆在技术上、经济上、环境上都是可行的。     

纳米氢氧化铝三相泡沫制备研究*

为更好地解决煤矿采空区煤炭自燃问题,以十二烷基硫酸钠为主体进行发泡剂复配,通过泡沫性能测试实验,研制出高性能发泡剂。以纳米氢氧化铝作为固相颗粒,制备出发泡倍数高、稳定性强的纳米氢氧化铝三相泡沫,使用锥形量热仪研究其高温阻燃能力和消烟性能。实验结果表明:当纳米氢氧化铝的质量分数从0提高到1%时,泡沫体积从500 mL增长至830 mL;当质量分数从3%提高到4%时,泡沫析液半衰期由15 min提升至42 min,且能在完全析液后保留三维网状结构。在高温阻燃和消烟能力方面,纳米氢氧化铝三相泡沫的加入将点燃时间从24 s延长至87 s,持续燃烧时间从835 s缩短至325 s,热释放速率高峰值从97.2 kW/m2降低至49.8 kW/m2,烟气生成速率峰值从0.064 m2/s降低至0.012 m2/s,对CO,CO2释放速率也有一定抑制作用。     

Physical,Mechanical, and Morphological Characteristics of Extruded Starch Acetate Foams

Starch acetates with degrees of substitution (DS) of 0.57, 1.11, 1.68, and 2.23 were prepared and extruded with either water or ethanol. The microstructure, physical properties (radial expansion ratio [RER] and unit density), mechanical properties (spring index [SI] and compressibility), and crystalline structure of the foams were investigated. The functional properties were a function of DS and blowing agent type. When water was used as the blowing agent and DS increased, the foams were pale yellow, with rough and uneven surfaces. The cells were dense, with thick cell walls. Lower RER and SI, with higher DS, were associated with high unit density and compressibility. When ethanol was used as the blowing agent, contrary results were observed. The snow-white foams had smooth surfaces, uniform cells, and smooth cell walls. High RER and SI, and low unit density and compressibility were observed. The changes in SI and compressibility with RER also were examined and found to depend on the type of solvent. A crystalline pattern was observed because of the formation of well-ordered structures during extrusion.     

Fabrication Mechanical Properties of Unidirectional Jute/PP Composites Using Jute Yarns by Film Stacking Method

This paper mainly focuses on the fabrication process of long fibre reinforced unidirectional thermoplastic composites made using both natural (untreated) treated jute yarns. Jute yarns were wound in layers onto a metallic frame. Polypropylene films were inserted between these layers and compression moulded to fabricate unidirectional jute/PP composite specimens. Static mechanical properties were evaluated from tensile three point bending tests. Pre- post-failure examination were carried out on the test specimens using optical scanning electron microscopy to analyse the test results and investigate the correlations between their impregnation state, processing conditions, mechanical performances and fracture morphologies. For the unidirectional jute/PP film-stacked composites, the results indicated that the processing condition at the moulding temperature of 160°C and moulding pressure of 2.0 MPa for 15 min was ideally suited to obtain optimized properties. Improved wettability of resin melts due to complete matrix fusion at this processing condition facilitated thorough impregnation with minimum microstructural imperfections (microvoids) being generated. Jute/PP composites that contained treated jute yarns have shown superiority in tensile bending properties. Jute yarns polished or coated with PVA/PP (polyvinyl alcohol/polypropylene) must have contributed positively to fibre/matrix interfacial interactions leading to matrix to fibre effective stress transfer, thereby improving their reinforcing effects. Tensile strength and modulus of PP resin increased by approximately 285% and 388%, respectively, due to 50 wt% reinforcement by natural jute yarns. Further improvements in strength and modulus were achieved by approximately 14% and 10%, respectively, when treated yarns were used . The maximum bending stress modulus of jute/PP composites containing untreated yarns were approximately 190% and 460% higher than those of the virgin PP materials, and bending properties were improved by further 11% and 23%, respectively, due to coating treatments on the yarn surface.     

北京地区对流层低层臭氧及硫酸盐气溶胶的时空分布

基于OMI/Aura卫星资料,分析了北京地区2007~2016年近10a对流层O₃浓度（0~3km）、硫酸盐气溶胶光学厚度（0~2km）、SO₂（边界层以内）柱浓度时空演变特征.结果表明,近10a来北京地区O₃浓度总体呈现上升趋势,最低值在2007年,浓度为33.65 μg/m³;硫酸盐气溶胶污染总体变化呈现先下降后增长的趋势,2007年硫酸盐气溶胶污染最为严重,2011年污染最轻,对应的AOD值为0.252,但在2014年以后,硫酸盐气溶胶污染又出现增长趋势;SO₂浓度在2007~2016年总体呈现下降的变化趋势,且下降趋势明显,最高值为2007年,最低值出现在2016年,最低值比最高值降低了60.42%,但在2011年污染出现反弹.北京O₃季节变化明显,夏季高、春秋次之、冬季低;硫酸盐气溶胶污染季节特征与O₃相同;SO₂污染主要集中在冬季,采暖期污染程度高于非采暖期.     

锑对甘蓝的毒性阈值研究

为丰富完善我国土壤中Sb（锑）对植物的毒理学数据并为土壤Sb生态基准的制定提供依据,参照国际标准化组织颁布的植物毒性试验的标准方法（ISO 11269-2:2013）,以外源添加的方式研究了我国17种典型土壤中Sb对甘蓝早期生长生物量的影响.结果表明:①基于全量Sb推导的甘蓝的毒性阈值EC₁₀（10%抑制效应浓度）变化范围为100.55~656.65 mg/kg,表明不同土壤中Sb的毒性差异显著,但基于有效态Sb（Na₂HPO₄溶液提取）推导的不同土壤中EC₁₀的变化范围为8.28~24.05 mg/kg,其EC₁₀差异有所减小;②相关性分析表明,基于土壤全量Sb推导的EC₁₀与w（OM）（OM为有机质）、w（TN）（TN为全氮）和CEC（阳离子交换量）均呈显著正相关（相关系数为0.746~0.779）,而基于有效态Sb推导的EC₁₀与w（Fe）和w（Mn）呈显著正相关（相关系数为0.479~0.615）;③多元回归分析进一步表明,土壤pH、w（OM）和CEC可以解释基于全量Sb推导的EC₁₀值74.6%的变异,w（OM）和w（Mn）可以解释基于有效态Sb推导的EC₁₀值62.6%的变异.研究显示,Sb的Na₂HPO₄提取态能在一定程度上解释不同土壤中Sb对甘蓝的毒性差异,pH、w（OM）、CEC和w（Mn）是影响Sb对植物毒性的土壤主控因子,可以较好地预测Sb的毒性阈值.      

模拟日光照射下土霉素的复合光化学转化动力学及环境归趋

环境水体中存在众多可解离的有机污染物,而不同的解离形态表现出相异的环境行为,如光化学反应活性和归趋.本文以土霉素(OTC)为例,研究了水中可解离化合物的表观光降解、光氧化等复合光化学转化动力学,并揭示了其相应的环境光化学归趋和贡献.模拟日光(λ290nm)照射下,OTC的光降解遵循准一级反应动力学,光解速率常数(k)对pH表现出明显的依赖性.这是由于随pH值升高,解离形态(i)从OTCH_2~0、OTCH~-到OTC~(2-)渐变,相应的k_i和量子产率(Φ_i)显著增大.竞争动力学实验进一步表明,·OH和~1O_2均可以氧化降解OTC,且降解速率随着pH的增大而加快.这与3种解离形态不同的去质子化程度和氧化反应活性有关.去质子化增加化合物的电子密度,利于活性氧物种的亲电攻击,从而促进光氧化反应.基于以上OTC解离形态的不同光化学转化活性,评估了环境表层水体(pH=6~9)中的复合光化学转化半减期(t_(1/2,E)).t_(1/2,E)值依赖于基质pH和季节,北纬45°晴天正午,t_(1/2,E)在0.131 h(仲夏,pH=9)到3.63 h(仲冬,pH=6)之间.多数情况下,OTC的表观光解是其最主要的光化学转化途径,~1O_2氧化次之,而·OH氧化的贡献非常小.以上结果证明了OTC不同解离形态具有不同的光化学转化动力学.因此,为了准确评价水环境中抗生素等可解离有机污染物的光化学归趋和风险,有必要综合考虑所有解离形态的复合光化学行为.     

长三角典型城郊土壤抗生素空间分布的影响因素研究

阐明土壤抗生素的空间分布特征对于认识抗生素的空间扩散和迁移过程、控制土壤抗生素污染、维护土壤安全具有重要意义.本研究通过空间采样,系统分析了长三角地区典型城郊流域土壤抗生素的空间分布特征,并探讨了人类活动、土壤性质和微生物群落对土壤抗生素分布的影响.结果表明,农田土壤中抗生素含量显著高于园地和林地,其中,检出浓度顺序为:四环素类(TCs)喹诺酮类(QNs)大环内酯类(MLs)磺胺类(SAs),平均含量分别为41.43、11.38、0.15、0.09μg·kg~(-1),农田土壤抗生素含量与有机肥施用密切相关.Spearman相关分析结果表明,TCs、QNs、SAs及抗生素总含量与距城镇距离、距道路距离、海拔及C/N具有显著的负相关性(p0.05),表明这3类抗生素的空间分布受人类活动的强烈影响,而MLs含量与人类活动的关系则较弱.土壤养分、颗粒组成、pH、容重等对抗生素的吸附、迁移、降解等环境行为具有强烈的影响,其空间异质性影响了土壤抗生素空间分布的差异性.土壤微生物群落与土壤抗生素之间具有较为复杂的联系,研究发现,部分变形菌门、酸杆菌门、拟杆菌门、放线菌门及浮霉菌门细菌与土壤抗生素含量呈现负相关.方差分解分析揭示出土壤性质、人类活动及其相互作用是土壤抗生素空间分布的主要影响因素,对土壤抗生素分布空间变化的总解释度接近于58%,达到了较高水平.