CeO2/TiO2纳米管催化剂脱硝性能研究

利用废气中本身含有的CO催化还原烟气中的NO_x,可以实现以废治废。采用TiO₂纳米管负载CeO₂,制备CeO₂/TiO₂纳米管催化剂,并对其进行了SEM表征及影响因素实验。实验结果表明：在n（Ce）∶n（Ti）=3∶7、焙烧温度500 ℃、焙烧时间3 h时制备的CeO₂/TiO₂纳米管催化剂形貌较好,表面颗粒分布相对均匀;反应温度400~600 ℃时NO脱除率达98%;该催化剂具有一定的抗氧性能;当n（SO₂）∶n（NO）=（1∶2）~（2∶1）时,NO脱除率仍然在95%以上。     

CePO4-TiO2固溶体的NH3-SCR活性

采用共沉淀法合成了不同Ce与Ti摩尔比的CePO₄-TiO₂复合材料,利用XRD、TEM、NH₃-TPD和H₂-TPR技术对其物理化学性质进行了表征,并对其NH₃-SCR活性进行了评价。实验结果表明：随着CePO₄含量的增加,催化剂的活性提高;当Ce与Ti的摩尔比为8:2时催化剂的活性最高,230 ℃的NO转化率达到100%,且具有更广的温度窗口,优于纯CePO₄。表征结果显示,CePO₄与TiO₂形成固溶体后,颗粒尺寸较为均匀,强酸位的数量增多,氧化还原性能提升,从而提高了催化剂的SCR反应活性,同时改善了其抗水抗硫性能。     

南四湖沉积物中有机氯农药和多氯联苯垂直分布特征

通过对采集于南四湖湖区的沉积物柱状样品中有机氯农药（OCPs）和多氯联苯（PCBs）同系物的GC-ECD定量分析测定,并结合²¹⁰Pb同位素定年分析,重建了南四湖湖区有机污染物的污染史.结果表明,样品中OCPs、HCHs、DDTs和PCBs的含量范围分别为1.64～17.9、0.66～12.5、0.24～2.99和7.84～42.8 ng·g^-1.柱状沉积物的沉积速率为0.330 cm·a^-1,平均沉积通量为0.237 g·(cm²·a)^-1,所采集的样品沉积时间为1899～2000年.OCPs和PCBs分别在1960和1970年左右出现浓度峰值,随后含量逐渐下降.污染物来源分析表明,HCHs来源于新的工业HCH和林丹2种工业品,HCH和DDT污染主要源于历史上的使用;PCBs主要来自于造纸漂白过程和焚烧炉排放.生态风险评价结果表明,除β-HCH、γ-HCH和艾氏剂3种污染物在14～16　cm附近、对应沉积时间为1960年左右测试数据略高于风险水平低值,其余污染物的所有数据均低于风险水平低值.整体而言,南四湖柱状沉积物中的OCPs和PCBs含量属于低生态风险水平.     

废旧电容器存放点多氯联苯的污染特征

采用气相色谱-电子捕获检测器测定废旧电容器存放地点附近的土壤和植物中多氯联苯(PCBs)的含量.分析了羊茅草(Festuca.L)的叶和根中PCBs的变化,应用多元线性回归方法定量判别了PCBs污染类型,进而探讨了PCBs的分布特征.结果表明,存放点PCBs污染水平较高,污染类型与Aroclor 1248相似.随着离污染点距离的增加,PCBs浓度急剧下降.污染类型逐步偏离Aroclor 1248,二氯和三氯联苯的百分比升高,四氯和五氯联苯下降.表现出水相和气相传输的作用,在一般情况下,水相传输起主导作用.另外,PCBs在羊茅草的叶和根中浓度的比值有上升的趋势.这种变化趋势和PCBs大气传输过程相关联,大气传输的贡献随着距离的增加PCBs浓度水平逐步下降而逐步显现.     

高危作业有害因素预防控制水平预警模型

针对职业卫生领域出现的急慢性职业病及突发性化学中毒等事件,本文采用预防控制水平指标体系,用因子分析法构建了单项有害因素的预警模型。在此基础上,利用加权平均法给出了多项有害因素的综合预警模型,其中,应用层次分析法确定各个有害因素的权重。高危作业有害因素预警模型的提出为高危作业有害因素防治提供了量化的科学依据。     

纳米铝粉对烟火药剂热安全性影响研究

为研究铝粉纳米化后对烟火药剂性能的影响,本文将普通铝粉和纳米铝粉分别与氯酸钾、硫粉按照零氧平衡的同一配比（17％AL＋63％KClO3＋20％S）配成的烟火药剂进行ARC热分析对比试验发现,含纳米铝粉的烟火药剂热分解的初始反应温度降低,反应到达最大温升速率所需的时间延长,反应所能达到的最高压力降低。这说明纳米铝粉的加入在加速其反应进程的同时,可有效地降低其反应的激烈程度和危险性,即铝粉纳米化后可以有效的改善烟火药剂的性能,提高其安全性。     

Spatial character of polychlorinated biphenyls from soil and respirable particulate matter in Taiyuan, China

As one of China’s great metropolises, Taiyuan is affected by heavy chemical industry and manufacture of chemical products, and faces pollution from polychlorinated biphenyls (PCBs). Therefore, this study was conducted to determine the PCB concentrations in various environmental media in Taiyuan. We collected 15 soil samples, 34 respirable particulate matter (PM) samples (17 of PM_2.5 and 17 of PM₁₀) from urban areas of Taiyuan, and measured a total of 144 PCB congeners (including some coeluting PCB congeners). The total PCB concentrations were 51–4.7 × 10³ pg g⁻¹ in soil, 27–1.4 × 10² pg m⁻³ in PM_2.5 and 16–1.9 × 10² pg m⁻³ in PM₁₀. Of the PCB homologues, the dominant PCBs detected in the various media were all tri-CBs. Soil was relatively the most polluted media. Furthermore, principal-component analysis revealed that the major PCB source in Taiyuan may be associated with the main commercial PCB through long-range transmission. Toxic equivalency (TEQ) concentrations (based on ten dioxin-like PCBs) ranged from N.D. to 5.9 × 10⁻³ pg-WHO TEQ g⁻¹ in soil, 2.0 × 10⁻⁴–3.4 × 10⁻³ pg-WHO TEQ m⁻³ and 1.0 × 10⁻⁴–1.2 × 10⁻³ pg-WHO TEQ m⁻³ in PM_2.5 and PM₁₀, respectively. In previous studies, PCBs were not a severe component of contaminant in Taiyuan; however, this study suggested there is a potential threat of human exposure to PCBs for residents of Taiyuan.     

Polychlorinated naphthalenes in human adipose tissue from New York, USA

Polychlorinated naphthalenes (PCNs) are persistent, bioaccumulative, and toxic contaminants. Prior to this study, the occurrence of PCNs in human adipose tissues from the USA has not been analyzed. Here, we have measured concentrations of PCNs in human adipose tissue samples collected in New York City during 2003-2005. Concentrations of PCNs were in the range of 61-2500 pg/g lipid wt. in males and 21-910 pg/g lipid wt. in females. PCN congeners 52/60 (1,2,3,5,7/1,2,4,6,7) and 66/67 (1,2,3,4,6,7/1,2,3,5,6,7) were predominant, collectively accounting for 66% of the total PCN concentrations. Concentrations of PCNs in human adipose tissues were 2-3 orders of magnitude lower than the previously reported concentrations of polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Concentrations of PCNs were not correlated with PCB concentrations. The contribution of PCNs to dioxin-like toxic equivalents (TEQs) in human adipose tissues was estimated to be <1% of the polychlorinated dibenzo-p-dioxin/dibenzofuran (PCDD/F)-TEQs.     

碱激发胶凝材料及其固化Pb^2＋的试验研究

对碱激胶凝材料（碱-偏高岭土、碱-矿渣和碱-粉煤灰）与水-水泥体系固化Ph^2＋进行了试验研究,其中水-水泥体系为对比样。结果表明：对于相同稠度的碱激发胶凝材料,即使Pb^2＋含量达到2．4％,除了碱-粉煤灰的抗压强度略低外,其他都达到30MPa以上,满足填埋或做建筑基材的使用要求;与水泥相比,碱激发胶凝材料能显著降低重金属离子（Ph^2＋）浸出浓度,其规律性与其NH4交换容量大小的规律性一致,与其固化体的抗压强度的大小没有相关性。