Ethyl thiosemicarbazide intercalated organophilic calcined hydrotalcite as a potential sorbent for the removal of uranium(VI) and thorium(IV) ions from aqueous solutions

This work was conducted to determine the practicability of using a new adsorbent 4-ethyl thiosemicarbazide intercalated,organophilic calcined hydrotalcite(ETSC-OHTC) for the removal of uranium(U(VI)),and thorium(Th(IV)) from water and wastewater.The FTIR analysis helped in realizing the involvement of nitrogen and sulphur atoms of ETSC in binding the metal ions through complex formation.Parameters like adsorbent dosage,solution pH,initial metal ions concentration,contact time and ionic strength,that influence adsorption phenomenon,were studied.The optimum pH for maximum adsorption of U(VI) and Th(IV) was found to be in the range 4.0-6.0.The contact time required for reaching equilibrium was 4 hr.The pseudo second-order kinetic model was the best fit to represent the kinetic data.Analysis of the equilibrium adsorption data using Langmuir,Freundlich and Sips models showed that the Freundlich model was well suited to describe the metal ions adsorption.The K F values were 25.43 and 29.11mg/g for U(VI) and Th(IV),respectively,at 30°C.The adsorbent can be regenerated effectively from U(VI) and Th(IV) loaded ones using 0.01mol/L HCl.The new adsorbent was quite stable for many cycles,without much reduction in its adsorption capacity towards the metals.     

Simultaneous preconcentration of cadmium and lead in water samples with silica gel and determination by flame atomic absorption spectrometry

A new method that utilizes pretreated silica gel as an adsorbent has been developed for simultaneous preconcentration of trace Cd(II) and Pb(II) prior to the measurement by flame atomic absorption spectrometry. The effects of pH, the shaking time, the elution condition and the coexisting ions on the separation/preconcentration conditions of analytes were investigated. Under optimized conditions, the static adsorption capacity of Cd(II) and Pb(II) were 45.5 and 27.1mg/g, the relative standard deviations were 3.2% and 1.7% (for n = 11), and the limits of detection obtained were 4.25 and 0.60 ng/mL, respectively. The method was validated by analyzing the certified reference materials GBW 07304a (stream sediment) and successfully applied to the analysis of various treated wastewater samples with satisfactory results.     

呼和浩特地区污水厂能耗评价与碳排放分析

污水处理过程的能耗和温室气体排放方面的研究对于应对能源危机和气候危机具有重要作用。文章利用层次分析法,建立了具有4层15项指标的能耗评价体系。结合城镇污水处理系统的绿色指标体系,选取呼和浩特地区具有代表性、处理规模相近的2座中小型污水厂进行能耗评价。结果表明:处理能力利用率、处理工艺系统稳定性和污水厂高程布置所对应的3项评价指标在所选择的能耗影响因素中所占权重较大,分别为:0.143 0,0.302 4和0.145 6。进一步运用IPCC计算方法对污水处理厂进行碳排放概算,得出A、B污水处理厂的碳排放量分别为:19.401 t CO2/104t、18.378 t CO2/104t。A、B污水处理厂的实际比能耗分别为0.293 kW.h/m3、0.195 kW.h/m3。将碳排放数据与实际能耗情况对比得出:污水处理厂的能耗水平越高,单位碳排放量也越大。     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

危险及可操作性分析在LNG汽车加气站的应用

利用危险及可操作性分析(HAZOP)技术对液化天然气(LNG)汽车加气站卸车、调压和加液流程进行系统的危险分析和探讨,并提出建议措施。应用实例表明,HAZOP技术可有效地辨识LNG汽车加气站的风险,可作为LNG加气站风险管理的有效工具之一。     

阿替洛尔在硝酸根溶液中的光降解研究

以氙灯为模拟太阳光光源,研究了β阻滞剂阿替洛尔(ATL)在硝酸根溶液中的光解,探讨了硝酸根离子浓度、溶液pH值、碳酸氢根离子浓度和腐殖质浓度对ATL光解的影响.结果表明,ATL在不同浓度硝酸根溶液中的光解反应符合准一级动力学规律,增大硝酸根离子浓度促进了ATL的光降解率,当硝酸根离子浓度由0增至5 mmol.L-1时其速率常数由0.002 26min-1增至0.009 4 min-1;酸性或碱性溶液有利于ATL在硝酸根溶液中的光解,碳酸氢根离子浓度对光解无明显影响,而加入Suwannee富里酸(SRFA)对光解产生抑制作用.采用异丙醇作为羟基自由基分子探针检测到.OH存在于ATL光解过程中.采用SPE-LC-MS方法鉴定了ATL在硝酸根溶液中的主要光解产物,并提出了可能的光解途径.     

空白值校正法无汞快速测定地表水化学需氧量

探讨了K2Cr2O7在不同酸度的硫酸介质中的化学行为,确定9 mol/L H2SO4为K2Cr2O7法测定地表水COD的合理酸度。多种有机物消解试验及半年多地表水样跟踪检测,将消解回流时间从2小时缩短到30分钟之内是可行的。氯离子(Cl-)干扰可用生成AgCl沉淀和空白值校正的办法消除。此方法的检出下限是11mg/L,样品测定的加标回收率在96%～101%。此方法不仅缩短了回流时间、减少了汞带来的二次污染,从而实现无汞快速测定地表水COD。