Endpoint ‘floating leaves’ of <Emphasis Type="Italic">Potamogeton natans</Emphasis>: A new method to evaluate the development of macrophytes in pond mesocosms

Goal, Scope and Background One of the advantages of long-term mesocosm experiments as compared to short-term standard toxicity tests in the laboratory is the potential for detecting secondary effects due to the interaction of species and recovery with biomass of macrophytes being an important endpoint. However, generating biomass data by harvesting is often laborious, time-consuming, costly and restricted to the end of the experiment. Moreover, valuable information may get lost, in particular in single application studies, since maximal primary effects and secondary effects or recovery occur per se at different times. Potamogeton natans was used as an example in order to test whether number and area of floating leaves can be reliably measured and be used as intermediate and final endpoints in mesocosm effect studies. Methods Digital photos, which were taken of the water surface in the course of an indoor pond mesocosm study on herbicide effects, were subjected to image analysis. The results were compared to wet weight and ash-free dry weight of Potamogeton at the end of the herbicide study. Results and Discussion Both number and area of floating leaves indicated the same herbicide effects as wet weight and ash-free dry weight of Potamogeton. Error introduced by the different work steps is small and can be further minimised by a number of method improvements. Recommendations and Perspectives In indoor mesocosm studies, errors due to the perspective adjustment may be circumvented by taking the photos perpendicular to the water surface. Correction for lens aberration, identical light conditions and the use of fluorescence images are considered promising. Field applications are proposed.     

考虑人因差错影响的结构可靠度计算方法

通过对单个或任意多个人因差错影响下构件截面失效概率计算方法的分析讨论,推导出在理想已知条件下的数学解析求解公式;在考虑人因差错对结构参数影响程度的空间离散化后,得出了相应的简化计算方法;并以一个单筋梁的正截面为例进行了失效概率计算和人因差错影响程度分析.在目前人因差错的发生及其影响规律的研究不完善、缺乏必要的数学模型的现实条件下,该方法对人因差错影响下构件截面失效概率的分析计算有一定的实用价值.     

爆炸荷载作用下钢筋混凝土防爆墙动力响应研究

为了研究钢筋混凝土防爆墙的抗爆能力,采用有限元分析方法对不同纵向配筋率、不同高跨比、不同厚度的墙体在爆炸动态荷载作用下的动力响应进行研究,对各种不同设置的钢筋混凝土防爆墙的抗爆性能进行评估。结果表明:减小高跨比对提高钢筋混凝土防爆墙的抗爆能力最为重要,提高纵向配筋率,增加厚度都能增加防爆墙的抗爆能力。     

基于灰预测模型的大跨度预应力混凝土桥梁施工监测

运用灰色系统理论,建立大跨度预应力砼刚构-连续组合梁桥悬臂浇筑施工梁段立模标高预测的GM(1,1)模型,并用残差的GM(1,1)模型对其进行修正;同时把该预测模型应用于松原龙华松花江特大桥实际工程;其结果表明梁段立模标高预测精度较高,完全能够满足工程的需要,为同类桥梁的施工监测提供参考。     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.     

生物质热电厂大气影响评价的研究

为确定生物质能发电环境方面的可行性,分析了生物质能发电的工艺流程,相比于火电的优缺点,并进行了生物质能热电联厂的大气环境影响评价研究。结果表明：预测评价的烟尘、SO2和NO2排放浓度分别为11,63mg／m^3、200．3mg／m^3和378．7mg／m^3,均远低于火力发电的排放值;在不同条件下、不同地点SO2和NO2的1小时、日均浓度也均远低于火力发电的浓度值。说明了生物质能发电在环境友好性方面具有明显的优势。     

火灾高温下CFRP加固钢筋混凝土梁温度场分析

综合国外CFRP加固混凝土结构抗火试验相关研究,总结了CFRP的高温热工性能参数。用ANSYS软件对火灾高温下不同情况(无防火保护层和有防火保护层)和不同工况(防火涂料涂抹形式)下CFRP加固后的钢筋混凝土梁进行了温度场数值模拟研究。结果表明,防火涂料厚40 mm时,梁耐火极限可达2.5小时以上,且底面和两侧面全面涂抹防火涂料的防火效果最好。本文研究有助于进一步深入认识CFRP加固钢筋混凝土结构在高温下的力学性能和耐火极限,且对CFRP加固后的结构防火设计具有一定的指导意义。     

飞播马尾松林生物产量及生产力研究

湘乡市16年生不同密度的马尾松(Pinus massoniana)飞播林林分单株生物量随密度的增加而明显减小,低密度林分是高密度林分的2 42倍,高出18.33kg;当林分密度一定后,林分生物量同样随密度的增加而减小,低密度林分比高密度林分高出21.81t/hm2。林分各组生物量随密度增大而减小,并出现W>W根>W枝>W皮>W叶的规律。年均净生长量低密度林分是高密度林分的1.40倍。     

剑麻纤维基多孔炭材料的制备及其吸附氯苯的研究

以剑麻纤维为原料,通过简易的一步炭化活化法制备了一系列多孔炭材料,分别探究了3种温和的金属盐活化剂、活化剂与剑麻纤维的质量比和活化温度对炭材料的氯苯吸附量的影响,并通过BET、SEM、XRD、Raman、FT-IR、元素分析等手段表征其物理化学性质.结果表明,当采用CuCl₂为活化剂、CuCl₂与剑麻纤维的质量比为10∶1及活化温度为800℃时,制备得到的剑麻纤维基多孔炭(PCC)吸附性能最佳,其在氯苯浓度为1560 mg·m^-3时,吸附量达到856 mg·g^-1,而未经CuCl₂活化的炭材料(PC)的氯苯吸附量仅为15 mg·g^-1.氯苯吸附性能的提升主要归因于比表面积、孔容、无序性和表面含氧官能团的增加.此外,采用巨正则系综蒙特卡洛(GCMC)方法模拟氯苯分子在制备的多孔炭材料中的吸附行为,结果表明,该材料中孔径为0.5 nm的孔对氯苯分子的吸附能力最强,且对氯苯吸附起主导作用的为苯环中心和Cl原子与炭材料上连接含氧官能团的H原子之间的静电作用力.     

富氧空位/梯次结构CeO2的制备及光催化CO2还原

采用Ce-BTC(均苯三甲酸)为模板,通过尿素溶液浸渍合成了具有富氧空位/梯次结构的CeO₂催化剂,并用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、拉曼光谱(Raman)和紫外可见漫反射(DRS)等手段对其进行了表征.结果表明,与金属有机框架(MOFs)浸渍尿素高温煅烧可以获得金属氧化物/g-C₃N₄复合材料不同,Ce-BTC/尿素体系煅烧后产品中未检测到g-C₃N₄,这可能与CeO₂的存在抑制了尿素分解产物的热缩聚过程,影响了g-C₃N₄的生成有关,但尿素的引入改变了Ce-BTC煅烧产物CeO₂的氧空位浓度,且获得梯次结构.将具有富氧空位/梯次结构的CeO₂-5用于光催化CO₂还原,催化结果表明:反应4h的CO产率可达2.06μmol/g,CH₄产率可达1.42μmol/g,性能是Ce-BTC未...