用调查表与因果图法分析重整反应器DC301～304扇形管变形的原因

通过1991年、1992年、2001年3次大检修对重整反应器DC304扇形管下沉数据的实测,发现温度变化是扇形管变形的关健原因.     

增温快速测定BOD的动力学研究

应用ＢＯＤ反应动力学原理，从理论上建立了ＢＯＤ测定培养时间ｔ（ｄ）随培养温度Ｔ（℃）变化的数学模型，并导出通用增温培养时间，用通用增温培养时间２７℃下３天和３２℃下２天测得ＢＯＤ与标准法ＢＯＤ相一致，两者回归分析相关系数均大于０．９９９。     

聚丙烯环管反应器参数安全性分析

采用参数敏感性分析方法对聚丙烯装置环管反应器反应温度、转化率对初温的安全敏感性进行了研究。结果表明,反应初温在72~74℃的范围属于反应器的温度敏感区域,超过74℃则进入温度极敏感区域,可引起反应器堵塞、出料泵过载,严重时可造成非正常停车、甚至超压爆炸事故。     

Effects of temperature on population growth and intake of food by the army worm, Mythimna separata (Walker)

Population life tables of the army worm, Mythimna separata, were constructed and nutritional parameters of food for the larvae were examined at 5 temperatures from 16℃ to 32℃. The temperature suitable for growth and reproduction of the insect ranged from 20℃ to 28℃ with the optimum of 24℃. Their survivalship and fecundity were much poorer at 32℃ than at 16℃. Indices of population trend of the insect at these temperatures could well fitted with the parabolic curve which theoretically indicated that the population density would multiply by some 660 after one generation circle at the optimal temperature, 22.6℃, and it would decline at temperatures higher than 32.9℃ or lower than 12.3℃. Larval food intake and their AD tended to go up while their ECI and ECD to go down with a rise in temperature. These alterations in population size and feeding behavior caused by temperature would exert an important effect on their damage to crops.     

N/Ce doped graphene supported Pt nanoparticles for the catalytic oxidation of formaldehyde at room temperature

Pt catalysts with nitrogen-doped graphene oxide (GO) as support and CeO₂ as promoter were prepared by impregnation method,and their catalytic oxidation of formaldehyde (HCHO) at room temperature was tested.The Pt-CeO₂/N-rGO (reduced GO) with a mass fraction of 0.7% Pt and 0.8%CeO₂ exhibited an excellent catalytic performance with the 100% conversion of HCHO at room temperature.Physicochemical characterization demonstrated that nitrogendoping greatly increased the...     

360t压头机的结构设计

用专用设备将待卷圆钢板两端先压成所需圆弧后再卷,提高焊缝质量,减少了加工工时。根据泰州第二纺织机械厂的生产需要,为其设计的360t压头机,成功地解决了该厂纺机产品中滚筒卷圆的生产问题。介绍了该机的工作原理,焊接式床身的结构以及液压传动系统的特点。     

生物污染

介绍了生的污染的概念和特点，着重讨论了造成生的污染主要因素，如引种，生物有机体的过度繁殖和扩张等，以及畜牧场污水，生物合成工厂废弃物等引起的生物污染。文章呼吁：在研究保护生物多样性整体计划时必须考虑到生物圈污染这一最大的理论问题：要加强移入种和本地种之间相互关系的生太研究；当今最迫切也是最复杂的研究方向是预测生态系统中由人类引起的变化。     

提高深盲孔壳类零件温冲压模具寿命的措施

采用合理的模具结构、选择合适的模具材料、采用适宜的热处理工艺和表面强化工艺以及提高模具的加工质量等都可以显著提高温冲压模具的使用寿命。分析了超高强度钢制深盲孔壳体温冲压成形时,模具的工作条件及其失效形式,提出了能有效提高该壳体温冲压模具寿命的具体措施。     

中温厌氧工艺合理温度上限的实验研究

介绍了用UASB对厌氧中温工艺的最高适宜温度进行的试验研究。试验用配制的酒精废水为处理基质 ,厌氧颗粒污泥作为菌种 ,进水CODcr为 5 0 0 0mg/L ,水力停留时间为 2 4h ,有效容积负荷为 5kgCODcr/m3 ·d。实验结果表明 ,中温厌氧工艺能稳定运行的最高运行温度上限为 4 2℃。     

热处理温度对TiO_2结构性质及光催化活性的影响

从晶相组成、晶格缺陷密度、表面羟基含量、晶粒尺寸以及比表面积等方面阐述了热处理温度与TiO2光催化剂结构性质的关系,并就混晶效应、载流子输运/俘获以及尺寸量子效应等对光催化活性的影响进行了讨论。此外,还汇总了对水中典型有机污染物的光催化氧化研究以及相关的催化剂结构性质。