供风量对褐煤自燃极限参数的影响研究

为研究不同供风量对褐煤自燃特性的影响规律,选取平庄瑞安煤矿褐煤作为试验煤样,利用程序升温试验和气相色谱仪,研究低温氧化阶段不同供风量条件下褐煤自燃极限参数与温度、供风量之间的变化规律。结果表明:温度在40~120℃时,随着供风量增大,褐煤的最小浮煤厚度和下限氧浓度降低,上限漏风强度增加;温度在120~200℃,供风量为40~80 mL/min和160~200 mL/min时,随着供风量的增加,其最小浮煤厚度和下限氧浓度增加,上限漏风强度减少;供风量为80~160 mL/min时,在供风量增大的情况下,褐煤的最小浮煤厚度和下限氧浓度降低,上限漏风强度增加;随着供风量减小,煤样临界点温度降低。     

Setting the stage for the review of the international estimate of short-term intake (IESTI) equation

ABSTRACT

In the framework of setting Maximum Residue Limits (MRLs) for pesticides, both chronic and acute health risks to consumers arising from the long-term and short-term dietary exposure to pesticide residues have to be assessed. The current internationally harmonized approach for assessing the acute dietary exposure is based on deterministic methods for calculating the IESTI (International Estimate of Short-Term Intake). Recently, it became apparent that the IESTI approach needs a revision in the light of new scientific and political aspects. The main reasons that require this review were the lack of an international harmonization of the methodology which implies trade barriers as well as difficulties in risk communication concerning the public trust in regulatory systems. The most recent milestone in the scientific debate on a possible revision of the IESTI equation was an international scientific workshop held in Geneva in September 2015. The main objectives of this meeting were the re-evaluation, and where possible, the international harmonization of the input parameters for the IESTI equations as well as the equations themselves. The main recommendations from the workshop were (i) to replace the highest residue and supervised trials median residue with the maximum residue limit (MRL), (ii) to use a standard variability factor of three, (iii) to derive the P97.5 large portion value from the distribution of consumption values of dietary surveys expressed as kg food/kg bw/d, and (iv) to remove the commodity unit weight from the equations. In addition, the application of conversion factors and processing factors was addressed. On the initiative of the (World Health Organization) WHO Collaborating Centre on Chemical Food Safety at the National Institute for Public Health and the Environment (RIVM), the Netherlands, an international working group with members from the French Agency for Food, Environmental and Occupational Health and Safety, France (ANSES), Australian Pesticides and Veterinary Medicines Authority, Australia (APVMA), German Federal Institute for Risk Assessment, Germany (BfR), Chemical Regulation Division, the United Kingdom (CRD), European Food Safety Authority (EFSA), and RIVM, the Netherlands was formed after the IESTI workshop to conduct a comprehensive impact assessment of the proposed changes of the IESTI equations.     

旋流场超细颗粒聚集实验研究

不同粒径分布和浓度的催化裂化(FCC)三旋回收超细催化剂颗粒在旋流场中经过50 h循环回流,颗粒中值粒径变化明显。物料中分散相越多、颗粒粒径越小时,颗粒碰撞越频繁,其聚集趋势越明显。颗粒聚集体在旋流场内不够稳定,通过对比不同进料速率下的旋流场聚集效果,得到最适合颗粒聚集的旋流场雷诺数为20 000。颗粒聚集体存在聚集极限粒径,其最佳聚集时间约为40 h,颗粒聚集后的旋流分离效率提高近5%。     

工业园区产业规划循环经济模式分析与改进研究——以银川望远工业园区开展循环经济模式为例

循环经济是实现工业园区可持续发展的最佳模式,概述了循环经济理论和工业园区开展循环经济的最佳模式—生态工业园的概念,结合银川望远工业园区循环经济实施方案,对方案进行了分析和论证,并提出该工业园区建设生态工业园的进一步循环经济模式。     

低浓度SO2和NOx自动监测系统性能评价方法

通过对7种废气自动监测系统的比较研究和现场测试,提出了非分散红外法、紫外差分法、紫外荧光法、化学发光法等多种SO2和NO x自动监测技术在低浓度范围实现准确定量监测的性能评价方法,定义了CEMS的系统检出限及其主要影响因素。建议采用系统检出限、线性误差等关键参数作为低浓度CEMS的性能评价方法,提出将全系统多点标准气体校准或加标回收率作为验收和质控监督的基本方法。     

分光光度法测定水中水合肼方法检出限的优化

用对二甲氨基苯甲醛分光光度法测定水中水合肼,将显色剂用量由5.0 m L降至3.0 m L,比色皿厚度由30 mm增至50 mm,水样酸度由1 mol/L降至0.5 mol/L,同时增加低浓度校准曲线,实现对其方法检出限的优化。结果表明,优化后方法检出限由0.007 8 mg/L降至0.001 0 mg/L,精密度及加标回收率均符合规范要求,能够保证低浓度水样的准确测定。     

Three Critical Issues in Sustainable Development Studies and the Transition Development of China

The core issue for China transition development in the next 30 years is to shift from the quantity growth model to the quality improvement model. The paper introduces the research progress in three key areas of sustainable development studies since the 1990s. It is pointed out that there is a well-being thresh-old at which the margin utility of economic growth for human well-being will decline, that there is an ecological limit beyond which more economic growth in terms of physical scale will be impossible, and that the creation of human well-being is related not only to the amount but also to the structure and efficiency of public expenditure from government. After an in-depth discussion on facts, origins and policy implications of each issue, some theory and policy thinking with long-lasting significance are raised for the transition development of China.     

Emission and burnt smell characteristics from combustion experiments with defined materials

Typical burnt smell often results from fire accidents or in general from incomplete combustion. Recently, eleven compounds were identified, which are basically responsible for this odour. When analyzing residual materials from different fire accidents, the pattern that means the relative ratios of these compounds among each other varies strongly, although always causing a burnt smelling. Consequently, lab-scale combustion experiments were performed in order to investigate the influence of defined materials from domestic environment on the burnt-smell fingerprints. Furthermore, the occurrence of other polar and higher molecular combustion products was studied. It was found that under good combustion conditions, the burnt smell patterns resulting from the single materials were astonishingly consistent, mostly dominated by methylphenols or naphthalene. No correlation could be found between these ‘fingerprints’ and combustion product groups identified by GC/MS-screenings. LC/MS/MS-measurements especially pointed at the existence of higher molecular weight phenolic and acidic functionalized compounds in the combustion residues.     

三面受火的方钢管混凝土柱耐火极限

编制了预测方钢管混凝土柱三面火灾作用下高温反应的数值分析程序,并将之用于不同荷载比、截面边长、长细比、荷载偏心率、钢材和混凝土强度及含钢率共480种工况下方钢管混凝土柱耐火极限参数分析,得到了三面火灾作用下方钢管混凝土柱耐火极限的主要影响参数及其影响规律。基于参数分析结果,定量给出了该受火条件下方钢管混凝土柱耐火极限的简化计算方法。研究结果表明:荷载比、截面边长、长细比是三面火灾作用下方钢管混凝土柱耐火极限的主要影响参数,表现为截面边长越大,荷载比和长细比越小,构件的耐火极限越大。由于存在极强偏心,当荷载作用点偏于背火面时荷载偏心率亦有较大影响。     

Error propagation in pesticide residue measurements estimated by computational simulations and inter-laboratory sample analysis

An assessment of the error associated with conventional pesticide residue analysis has been conducted based on computer simulations and inter-laboratory residue analysis. Computational simulations were conducted based on (i) typical performance and regulatory acceptance criteria of analytical methods, and (ii) field residue distributions. In addition, field samples with incurred residues were sent to different private laboratories and the results compared. The relative difference in pesticide residues obtained when samples from the same field or produce lot are analyzed at separate laboratories was used to quantify the uncertainty associated with residue analyses performed using common analytical technology, and methods that are in compliance with current regulatory requirements. The study showed that differences of > 100% are common and should be expected when samples from the same crop are analyzed at different laboratories. The results also suggest that the error within residue measurements can be particularly detrimental when a result is reported near the maximum residue limit (MRL).