富安茧丝绸清洁生产实例分析

通过对富安茧丝绸清洁生产审计的实例分析，总结出了清洁生产审计，增加了企业的经济效益，降低了生产成本，提高了产品质量，减少了污染物排放。     

论清洁生产和工业企业管理

清洁生产是从８０年代末发展起来的一种新的、创造性的保护环境战略措施，其中心思想是通过对生产进行全过程控制达到节能、降耗、减污的目的。本文介绍了清洁生产的基本概念，并通过分析和总结我国一些工业企业实行清洁生产的结果，论述清洁生产和工业企业管理的关系。     

H2O2 formation from photocatalytic processes at the ZnO/water interface

The paper focuses on the production of H2O2 by photocatalysis over ZnO in an aerated aqueous phase. The presence of different reductants that increase the H2O2 production in the aqueous phase is analysed; particular attention is paid to nitrite, which has been shown to be the reductant that produces the most significant increments in the H2O2 production. The photocatalytic anodic decomposition of ZnO in the presence of the different reductants is also investigated. From the results obtained, the relevance of the ZnO photocatalysis in the formation of environmental hydrogen peroxide is estimated.     

污泥与高浓度有机废物厌氧消化反应中的产气量

研究了高温／中温两相厌氧消化反应器系用以同时处理污泥与不同高浓度有机废物时产气及产甲烷的变化特性。结果表明，气体及甲烷主要是在第二段的中温消化反应器内产生。当中温消化反应器的有机负荷ＶＳ为１．６５￣３．１０ｋｇ／ｍ＾３ｄ时，稳态条件下的平均产气量为１．９５８￣４．０２０ｍ＾３／ｄ，气体中甲烷的平均组成为６５％￣７３％，甲烷的比产率为０．３９７￣０．５１１ｍ＾３／ｋｇＶＳ。     

利用有机基质厌氧生物产氢的试验研究

对利用有机基质厌氧生物产氢过程进行了试验研究 ,结果表明 ,污泥种类、基质种类、基质浓度和起始 p H对厌氧产氢反应有显著影响。当校河底泥在以 2 0 g COD/L的果糖为基质 ,起始 p H为 6.5时 ,产氢效果最佳 ,停滞期仅为 5 h,产气速率高达5 0 .1m L/g VSS·h,且可持续 12 h,累积产气量高达 60 4.9m L/g VSS,其中氢气含量约为 5 0 %。半连续试验的结果表明 ,若及时更换和补充基质 ,适当调节 p H,就可实现持续产氢 ,在 16h内平均产气速率可达 60 .0 m L /g VSS· h,氢气含量约为 45 %。     

砷华生产废渣中硫的回收利用研究

高温下氧化焙烧细磨后的砷华生产废渣，利用软锰矿浆吸收产生的SO2气体，吸收液经净化除杂、浓缩结晶等工序可制备工业产品硫酸锰。适宜的焙烧条件如下：焙烧温度为650℃，焙烧时间为60min，废渣粒度为-97μm。选择合适的吸收工艺，Mn的浸出率可达96．20％，此时SO2脱除率为87．20％。     

Principles and perspectives

BACKGROUND, AIM AND SCOPE: With respect to the enormous increase of chemical production in the last decades and the tens of thousands of individual chemicals on the market, the permanent improvement of chemical management is a permanent target to achieve the goals of sustainable consumption and production set by the WSSD in Johannesburg 2002. MAIN FEATURES: Several approaches exist to describe sustainability of chemistry. However, commonly agreed criteria are still missing. There is no doubt that products of modern chemistry help to achieve important goals of sustainability and that significant improvements have occurred regarding direct releases from production sites, but several facts demonstrate that chemistry is far from being sustainable. Still too many chemicals exhibit hazardous characteristics and pose a risk to health and environment. Too many resources are needed to produce chemicals and finished products. RESULTS AND CONCLUSION: Therefore, a strategy for sustainability of chemistry should be developed which comprises the following main elements: 1. Sustainable chemicals: sustainable chemical management includes a regulatory framework which makes no difference between new and existing chemicals, contains efficient information flow through the supply chain which allows users to handle chemicals safely and offers an authorisation procedure and/or an efficient restriction procedure for substances of high concern. This regulatory scheme should promote the development of inherently safe chemicals. 2. Sustainable chemical production: Sustainable chemical production needs the development and implementation of emerging alternative techniques like selective catalysis, biotechnology in order to release less CO2 and less toxic by-products, to save energy and to achieve higher yields. Information exchange on best available techniques (BAT) and best environmental practices (BEP) may help to promote changes towards more sustainability. 3. Sustainable products: An integrated product policy which provides a framework for sustainable products promotes the development of products with a long-term use phase, low resource demand in production and use, low emission of hazardous substances and properties suitable for reuse and recycling. This may be promoted by eco-labelling, chemical leasing concepts and extended information measures to enhance the demand of consumers and various actors in the supply chain for sustainable products. RECOMMENDATION AND PERSPECTIVE: Important tools for the promotion of sustainable chemistry are the abolition of barriers for innovation in legislation and within the chemical industry, more transparency for all users of chemical products, a new focus on sustainability in education and research, and a new way of thinking in terms of sustainability.     

纳米乳化油强化硝酸盐反硝化产气变化研究

为探究纳米乳化油原位修复硝酸盐污染地下水过程中产气对含水介质渗透性的影响,以硝酸盐为目标污染物,采用活性污泥滤液接种,分别以纳米乳化油、吐温80和司盘80为碳源开展硝酸盐降解批实验研究,探讨和评估硝酸盐降解及降解过程中的产气情况.结果显示,纳米乳化油、吐温80和司盘80均能促进硝氮的降解,在实验的100d内,共完成7个周期硝酸盐氮的有效去除,总去除率分别为79.5%、63.8%和68.8%.在硝酸盐氮降解过程中,受厌氧发酵和反硝化作用的影响,各反应体系中均有气体生成,只有活性污泥反应体系中主要产气成分是CO₂,未加碳源和分别加3种碳源的4个反应体系（都添加活性污泥和硝酸盐）中主要产气成分是CO₂、N₂.其中,添加纳米乳化油的反应体系U型管产气量最大,为47.73mL;受碳源厌氧发酵的影响,添加司盘80反应体系总产气量最大,为205.34mL.纳米乳化油反应体系次之,吐温80反应体系最小.根据三氮的变化,结合纳米乳化油反应体系理论与实际产气对比显示,在纳米乳化油强化硝酸盐反硝化过程中,18.8%纳米乳化油厌氧发酵产生CO₂,95.4%硝氮反硝化生成N₂.     

Fe2+浓度对生物产氢动力学的影响

研究了Fe²⁺在0～1 500 mg/L 范围内对混合细菌发酵产氢动力学的影响.结果表明,以葡萄糖为底物,在35℃ 和初始pH为7.0时,当Fe²⁺浓度为0～300 mg/L 时,混合细菌发酵葡萄糖的最大累积产氢量和平均产氢速率都随着Fe²⁺浓度的增加而增加;当Fe²⁺浓度为300 mg/L 时,最大累积产氢量和平均产氢速率最高,分别为302.3 mL和30.0 mL/h .当Fe²⁺浓度为0～350 mg/L 时,比产氢率随着Fe²⁺浓度的增加而增加,当Fe²⁺浓度为350 mg/L 时,最大比产氢率为311.2 mL/g .修正的Logistic模型能很好地描述累积产氢量随时间的变化规律.修正的Han-Levenspiel模型能很好地描述Fe²⁺浓度对平均产氢速率的影响.     

清洁生产在低碳经济中的战略地位与实践探析

以低碳经济提出的大环境为背景,阐述了低碳经济的内涵与发展,重点分析了清洁生产在低碳经济中的不可替代的作用和地位,并以丹东某硼化工企业为成功案例,论述了企业在实际生产过程中运用清洁生产理念发展低碳经济的经验,旨在为企业发展低碳经济提供思路与借鉴。