间位羟基/甲氧基多溴联苯醚的合成

本文设计了3种合成路线,通过偶合反应、Baeyer-Villiger氧化水解、硝基还原、加溴反应、去甲基化等一系列反应,合成了多种间位羟基/甲基多溴联苯醚.产物经过气相色谱-质谱仪(GC-MS)和核磁共振测试表明实验所合成得到的产物与设计的目标产物结构完全一致,其纯度达到标样要求.     

Bioabsorbable Soy Protein Plastic Composites: Effect of Polyphosphate Fillers on Biodegradability

The use of biodegradable polymers made from renewable agricultural products such as soy protein isolate has been limited by the tendency of these materials to absorb moisture. A straightforward approach for controlling the inherent water absorbency of the biodegradable polymers involves blending special bioabsorbable polyphosphate fillers, biodegradable soy protein isolate, plasticizer, and adhesion promoter in a high-shear mixer followed by compression molding. The procedure yields a relatively water-resistant, biodegradable soy protein polymer composite, as previously reported. The aim of the present study is to determine the biodegradability of the new polyphosphate filler/soy protein plastic composites by monitoring the carbon dioxide released over a period of 120 days. The results suggest that the composites biodegrade satisfactorily, with the fillers having no significant effect on the depolymerization and mineralization of the soy protein plastic, processes that would otherwise result in nonbiodegradable composites. Further, the results indicate that the biodegradation and useful service life of these biocomposites may be controlled by changing the filler concentration, making the biocomposites useful in applications in which the control of water resistance and biodegradation is critical.     

A Literature Review of Poly(Lactic Acid)

A literature review is presented regarding the synthesis, and physicochemical, chemical, and mechanical properties of poly(lactic acid)(PLA). Poly(lactic acid) exists as a polymeric helix, with an orthorhombic unit cell. The tensile properties of PLA can vary widely, depending on whether or not it is annealed or oriented or what its degree of crystallinity is. Also discussed are the effects of processing on PLA. Crystallization and crystallization kinetics of PLA are also investigated. Solution and melt rheology of PLA is also discussed. Four different power-law equations and 14 different Mark–Houwink equations are presented for PLA. Nuclear magnetic resonance, UV–VIS, and FTIR spectroscopy of PLA are briefly discussed. Finally, research conducted on starch–PLA composites is introduced.     

Thermal and Mechanical Properties of Plastics Molded from Sodium Dodecyl Sulfate-Modified Soy Protein Isolates

Soybean protein is a potential material for manufacturing of biodegradable plastics. The objective of this investigation was to characterize the thermal and mechanical properties of plastics made from sodium dodecyl sulfate (SDS)-modified soy proteins. Soy protein isolate (SPI) was prepared from defatted soy flour, modified with various concentrations of SDS, and then molded into plastics. The temperatures of denaturation of the modified soy protein increased at low SDS concentration and then decreased at high SDS concentration. At the same SDS concentration, the plastics molded from the modified soy proteins showed a similar temperature of denaturation, but a lower enthalpy of denaturation compared to the modified soy protein. Young's modulus of the plastics decreased as SDS concentration increased, and the tensile strength and strain at break of the plastics reached a maximum value at 1% SDS modification. Two glass transition temperatures were identified corresponding to the 7S and 11S globulins in SPI by dynamic mechanical analysis, and they decreased as SDS concentration increased. The SDS modification increased the water absorption of the plastics.     

利用稻谷壳水解液在气升式生物反应器中发酵生产单细胞蛋白

以稻谷壳水解液为原料 ,采用树状假丝酵母 AS1.257( Candida arborea AS1.257) ,在罐体高径比为 2.9和上升管与下降管的直径之比为 6.6的外循环气升式生物反应器中发酵生产单细胞蛋白 .研究了通风量、装料量、空气喷嘴直径等工艺和结构参数对发酵的影响 ,得到了较佳的发酵操作参数 .在发酵前 24h的通风量为 1.1m³/( m³· min) ,后 24 h的通风量为 1.4m³/( m³· min)～ 1.5m³/( m³· min) ,起始装料量为 8.5L～ 9.0 L,起始 pH为 4.5～ 5.0 ,发酵温度为 29± 1℃的操作条件下 ,经 48h的发酵 ,可得到较佳的结果 .在无筛板 ,带一块筛板和带二块筛板的外循环气升式生物反应器中 ,发酵 48h后的干基粗蛋白含量分别为 61.3%、62.9%、64.5% ,发酵液中干物质重分别为 20.8mg/ml、21.2 mg/ml、21.3mg/ml,总糖利用率分别为 78.2 %、83.9%、81.4% ,均高于机械搅拌生物反应器 ,气升式生物反应器内加装筛板可提高发酵得率 .     

鲢鱼、草鱼和尼罗罗非鱼热休克蛋白70基因cDNA全序列的克隆与分析

采用RT-PCR技术和RACE技术分别从淡水食毒藻鱼类鲢鱼（Hypophthalmichthys molitrix）、尼罗罗非鱼（Oreochromis nilotica）及草食性鱼类草鱼（Ctenopharyngodon idella）肝脏扩增出热休克蛋白70（HSP70）cDNA全序列,并与其它鱼类、两栖类和哺乳类动物的HSP70氨基酸进行了同源性比较. 结果表明,鲢鱼、草鱼和尼罗罗非鱼肝脏HSP70基因cDNA全长分别为2356 bp、2348 bp和2242 bp,分别编码649、649和638个氨基酸.鲢鱼、草鱼和尼罗罗非鱼HSP70与其它鱼类、两栖类和哺乳类动物HSP70氨基酸同源性均较高,表明其在进化上高度保守,且承担着重要的生理功能.构建系统进化树发现,鲢鱼、草鱼与其它鲤科鱼类斑马鱼、银鲫（Carassius auratus gibelio）的HSP70氨基酸同源性较高,处于同一进化树分枝;而尼罗罗非鱼HSP70未与其它鲈形目鱼类,如鲷科鱼类聚为一枝,而是占据一个独立的分枝,这与克隆得到的鲢鱼、草鱼肝脏HSP70基因可能为结构型HSP70,而尼罗罗非鱼肝脏HSP70基因可能为诱导型HSP70的结果相一致.     

肺炎嗜衣原体主要外膜蛋白基因片段在大肠杆菌中的表达与鉴定

表达肺炎嗜衣原体（Chlamydia pneumoniae,Cpn）主要外膜蛋白（MOMP）的可变区VD2-VD3区．纯化产物并进行免疫活性分析,为探索重组蛋白在肺炎嗜衣原体血清学诊断中的应用提供资料．应用聚合酶联反应（PCR）技术,从肺炎嗜衣原体标准株AR-39的MOMP上扩增出抗原优势表住VD2-VD3区,将目的片段定向插入pET-30a载体,转化大肠杆菌B121,IPTG诱导表达并以Ni-NTA亲和层析柱纯化表达产物并行western-blot鉴定．成功构建了pET-30a-MOMPVD2-VD3的原核表达系统,表达并纯化出相对分子质量（Mr）为24×10^3Da的重组蛋白．Western-blot证实重组蛋白能与Cpn MOMP多克隆抗体发生特异性反应．肺炎嗜衣原体的MOMPVD2-VD3基因可以在大肠杆菌中得到表达,其表达产物能与相应的抗体结合,为肺炎嗜衣原体诊断候选抗原的研究奠定了基础．图4,参9．     

一株受二噁英类化合物诱导表达绿色荧光蛋白的胃癌细胞系的建立

将人工合成的5个相连的XRE(Xeobiotic response element)和minimal CMV(Human cytomegalovirus)启动子,插入载体pEGFP-1,构建得到载体pXRE5-EGFP.以pXRE5-EGFP转染人胃癌细胞SGC-7901,经过筛选得到一株受2,3,7,8-四氯代二苯并二英(2,3,7,8-tetrachlorodibenzo-p-dioxin,TCDD)诱导表达绿色荧光蛋白的细胞系XRE5-SGC-7901.将XRE5-SGC-7901细胞株暴露于不同浓度TCDD(0、250、500pg·mL-1)中,发现TCDD暴露组XRE5-SGC-7901细胞中绿色荧光蛋白的表达量显著升高,且与TCDD暴露浓度呈正相关.新构建的细胞株具有二英类化合物诱导表达绿色荧光蛋白的功能.     

利用味精厂米渣生产发泡粉和蛋白质灭火剂

将米渣清洗、过滤以除去液化液、糖液,再加水调至130Be,用石灰调为不同pH,在不同时间下进行水解,结果表明当pH为11.5,在蒸气压为0.1MPa条件下,经过3h水解后蛋白质含量最高,可达到6.0%(水解液含量),再过滤、浓缩成为30%的蛋白质液,经过适当配制可成为蛋白质泡沫灭火剂,经过武汉市科威消防材料厂进行灭火测试,结果表明,粘度、沉淀物、发泡倍数、90%火焰控制时间、灭火时间、抗烧时间等指标均达到中华人民共和国公共安全行业标准(GA2191999);将30%的蛋白质液喷雾干燥后,可制备成为食用蛋白质发泡剂。     

Toxicity of abamectin and doramectin to soil invertebrates

This study aimed at determining the toxicity of avermectins to soil invertebrates in soil and in faeces from recently treated sheep. Abamectin was more toxic than doramectin. In soil, earthworms (Eisenia andrei) were most affected with LC50s of 18 and 228 mg/kg dry soil, respectively, while LC50s were 67-111 and >300 mg/kg for springtails (Folsomia candida), isopods (Porcellio scaber) and enchytraeids (Enchytraeus crypticus). EC50s for the effect on reproduction of springtails and enchytraeids were 13 and 38 mg/kg, respectively for abamectin, and 42 and 170 mg/kg for doramectin. For earthworms, NOEC was 10 and 8.4 mg/kg for abamectin and doramectin effects on body weight. When exposed in faeces, springtails and enchytraeids gave LC50s and EC50s of 1.0-1.4 and 0.94-1.1 mg/kg dry faeces for abamectin and 2.2->2.4 mg/kg for doramectin. Earthworm reproduction was not affected. This study indicates a potential risk of avermectins for soil invertebrates colonizing faeces from recently treated sheep.