Effective dialogue: Enhanced public engagement as a legitimising tool for municipal waste management decision-making

The complexity of municipal waste management decision-making has increased in recent years, accompanied by growing scrutiny from stakeholders, including local communities. This complexity reflects a socio-technical framing of the risks and social impacts associated with selecting technologies and sites for waste treatment and disposal facilities. Consequently there is growing pressure on local authorities for stakeholders (including communities) to be given an early opportunity to shape local waste policy in order to encourage swift planning, development and acceptance of the technologies needed to meet statutory targets to divert waste from landfill. This paper presents findings from a research project that explored the use of analytical–deliberative processes as a legitimising tool for waste management decision-making. Adopting a mixed methods approach, the study revealed that communicating the practical benefits of more inclusive forms of engagement is proving difficult even though planning and policy delays are hindering development and implementation of waste management infrastructure. Adopting analytical–deliberative processes at a more strategic level will require local authorities and practitioners to demonstrate how expert-citizen deliberations may foster progress in resolving controversial issues, through change in individuals, communities and institutions. The findings suggest that a significant shift in culture will be necessary for local authorities to realise the potential of more inclusive decision processes. This calls for political actors and civic society to collaborate in institutionalising public involvement in both strategic and local planning structures.     

Energy conversion from electrolyte concentration gradient using charged nano-pores

Power generation based on the reversed electro-dialysis (RED) cell is studied both numerically and experimentally in this work. The membrane that separates the concentrated and dilute electrolytes is treated as a charged nano-pore array. Both numerical and experimental results show that the RED cell performance is similar to the typical electrochemical cell having a linearly varied current–voltage relation. The open circuit voltage and short-circuit current depend on the ion selectivity of the nano-pore membrane, which is related to the concentration ratio, pore surface charge density, and pore size. The highest energy conversion efficiencies are approximately 48% and 24% from numerical predictions and experimental measurements, respectively. The reason for this discrepancy is attributed to the inhomogenous pore size and surface charge density distributions of the Al₂O₃ membrane used in these experiments.     

Effects of using arsenic–iron sludge wastes in brick making

The arsenic–iron sludge generated in most of the treatment systems around the world is discharged into the nearest watercourse, which leads to accumulative rise of arsenic and iron concentrations in water. In this study, attempts were made to use the arsenic–iron sludge in making bricks and to analyze the corresponding effects on brick properties. The water treatment plant sludge is extremely close to brick clay in chemical composition. So, the sludge could be a potential substitute for brick clay. This study involved the addition of sludge with ratios 3%, 6%, 9% and 12% of the total weight of sludge–clay mixture. The physical and chemical properties of the produced bricks were then determined and evaluated and compared to control brick made entirely from clay. Results of different tests indicated that the sludge proportion and firing temperature were the two key factors in determining the quality of bricks. The compressive strength of 3%, 6%, 9% and 12% sludge containing brick samples were found to be 14.1 MPa, 15.1 MPa, 9.4 MPa and 7.1 MPa, respectively. These results indicate that the compressive strength of prepared bricks initially increased and then decreased with the increase of sludge proportion. Leaching characteristics of burnt bricks were determined with the variation of pH at a constant temperature. The optimum amount of sludge that could be mixed with clay to produce good bonding of clay–sludge bricks was found to be 6% (safely maximum) by weight.     

From Population Viability Analysis to Coviability of Farmland Biodiversity and Agriculture

Substantial declines in farmland biodiversity have been reported in Europe for several decades. Agricultural changes have been identified as a main driver of these declines. Although different agrienvironmental schemes have been implemented, their positive effect on biodiversity is relatively unknown. This raises the question as to how to reconcile farming production and biodiversity conservation to operationalize a sustainable and multifunctional agriculture. We devised a bioeconomic model and conducted an analysis based on coviability of farmland biodiversity and agriculture. The coviability approach extended population viability analyses by including bioeconomic risk. Our model coupled stochastic dynamics of both biodiversity and farming land‐uses selected at the microlevel with public policies at the macrolevel on the basis of financial incentives (taxes or subsidies) for land uses. The coviability approach made it possible for us to evaluate bioeconomic risks of these public incentives through the probability of satisfying a mix of biodiversity and economic constraints over time. We calibrated the model and applied it to a community of 34 common birds in metropolitan France at the small agricultural regions scale. We identified different public policies and scenarios with tolerable (0–0%) agroecological risk and modeled their outcomes up to 2050. Budgetary, economic, and ecological (based on Farmland Bird Index) constraints were essential to understanding the set of viable public policies. Our results suggest that some combinations of taxes on cereals and subsidies on grasslands could be relevant to develop a multifunctional agriculture. Moreover, the flexibility and multicriteria viewpoint underlying the coviability approach may help in the implementation of adaptive management. Del Análisis de Viabilidad Poblacional a la Co‐Viabilidad de la Agricultura y la Biodiversidad de las Tierras de Cultivo     

Using internet search behavior to assess public awareness of protected wetlands

Improving public awareness of protected wetlands facilitates sustainable wetland management, which depends on public participation. One way of gauging public interest is by tracking Internet search behavior (ISB). We assessed public awareness of issues related to protected wetland areas (PWAs) in South Korea by examining the frequencies of specific queries (PWAs, Ramsar, Upo wetland, Sunchon Bay, etc.) using relative search volumes (RSVs) obtained from an Internet search engine. RSV shows how many times a search term is used relative to a second search term during a specific period. Public awareness of PWAs changed from 2007 to 2013. Initially the majority of Internet searches were related to the most well‐known tidal and inland wetlands Sunchon Bay and Upo wetlands, which are the largest existing wetlands in Korea with the greatest historical exposure. Public awareness, as reflected in RSVs, of wetlands increased significantly following PWA designation for the wetlands in 2008, which followed the Ramsar 10th Conference of Contracting Parties to the Convention on Wetlands (COP10) meeting. Public interest was strongly correlated to the number of news articles in the popular media, as evidenced by the increase in Internet searches for specific wetlands and words associated with specific wetlands. Correspondingly, the number of visitors to specific wetlands increased. To increase public interest in wetlands, wetland aspects that enhance wetland conservation should be promoted by the government and enhanced via public education. Our approach can be used to gauge public awareness and participation in a wide range of conservation efforts.     

Guidelines and Incentives for Conservation Development in Local Land‐Use Regulations

Effective conservation of biological diversity on private lands will require changes in land‐use policy and development practice. Conservation development (CD) is an alternative form of residential development in which homes are built on smaller lots and clustered together and the remainder of the property is permanently protected for conservation purposes. We assessed the degree to which CD is permitted and encouraged by local land‐use regulations in 414 counties in the western United States. Thirty‐two percent of local planning jurisdictions have adopted CD ordinances, mostly within the past 10 years. CD ordinances were adopted in counties with human population densities that were 3.0 times greater and in counties with 2.5 times more land use at urban, suburban, and exurban densities than counties without CD ordinances. Despite strong economic incentives for CD (e.g., density bonuses, which allow for a mean of 66% more homes to be built per subdivision area), several issues may limit the effectiveness of CD for biological diversity conservation. Although most CD ordinances required a greater proportion of the site area be protected than in a typical residential development, just 13% (n = 17) of the ordinances required an ecological site analysis to identify and map features that should be protected. Few CD ordinances provided guidelines regarding the design and configuration of the protected lands, including specifying a minimum size for protected land parcels or encouraging contiguity with other protected lands within or near to the site. Eight percent (n =11) of CD ordinances encouraged consultation with a biological expert or compliance with a conservation plan. We recommend that conservation scientists help to improve the effectiveness of CD by educating planning staff and government officials regarding biological diversity conservation, volunteering for their local planning boards, or consulting on development reviews. Guías e Incentivos para el Desarrollo de la Conservación en Regulaciones de Uso Local de Suelos     

The effect of clay catalyst on the chemical composition of bio-oil obtained by co-pyrolysis of cellulose and polyethylene

Cellulose/polyethylene (CPE) mixture 3:1, w/w with and without three clay catalysts (K10 – montmorillonite K10, KSF – montmorillonite KSF, B – Bentonite) addition were subjected to pyrolysis at temperatures 400, 450 and 500 °C with heating rate of 100 °C/s to produce bio-oil with high yield. The pyrolytic oil yield was in the range of 41.3–79.5 wt% depending on the temperature, the type and the amount of catalyst. The non-catalytic fast pyrolysis at 500 °C gives the highest yield of bio-oil (79.5 wt%). The higher temperature of catalytic pyrolysis of cellulose/polyethylene mixture the higher yield of bio-oil is. Contrarily, increasing amount of montmorillonite results in significant, almost linear decrease in bio-oil yield followed by a significant increase of gas yield. The addition of clay catalysts to CPE mixture has a various influence on the distribution of bio-oil components. The addition of montmorillonite K10 to cellulose/polyethylene mixture promotes the deepest conversion of polyethylene and cellulose. Additionally, more saturated than unsaturated hydrocarbons are present in resultant bio-oils. The proportion of liquid hydrocarbons is the highest when a montmorillonite K10 is acting as a catalyst.     

Transforming submerged-arc welding slags into magnetic glass-ceramics

Submerged-arc welding slag (SAWS) and rice husk (RH) wastes represent two particularly abundant metallurgical and agricultural wastes. This work focusses on the feasibility of SAWS, together with glass cullet and RHs, to develop lightweight porous glass–ceramics that could be useful for technical purposes. Effects of temperatures and amounts of RHs on the porosity and water absorption of porous glass–ceramics were discussed at various dosages of husks up to 20 wt%. Depending on the sintering temperature, XRD measurements confirmed the presence of more than two crystalline phases: diopside, jacobsite, MgAl₂O₄, Ca_1.82Al_3.64Si_0.36O₈ and pyrope. These samples exhibited magnetic properties which were related to the presence of jacobsite phase. Magnetization curve is a characteristic of soft ferromagnetic materials with magnetization saturating at ~0.82 emu/g. The present results show a promising way to treat submerged-arc welding slags, transforming it into useful porous and functional glass–ceramic products via a simple powder technology and sintering approach.     

A framework for evaluating and designing citizen science programs for natural resources monitoring

We present a framework of resource characteristics critical to the design and assessment of citizen science programs that monitor natural resources. To develop the framework we reviewed 52 citizen science programs that monitored a wide range of resources and provided insights into what resource characteristics are most conducive to developing citizen science programs and how resource characteristics may constrain the use or growth of these programs. We focused on 4 types of resource characteristics: biophysical and geographical, management and monitoring, public awareness and knowledge, and social and cultural characteristics. We applied the framework to 2 programs, the Tucson (U.S.A.) Bird Count and the Maui (U.S.A.) Great Whale Count. We found that resource characteristics such as accessibility, diverse institutional involvement in resource management, and social or cultural importance of the resource affected program endurance and success. However, the relative influence of each characteristic was in turn affected by goals of the citizen science programs. Although the goals of public engagement and education sometimes complimented the goal of collecting reliable data, in many cases trade‐offs must be made between these 2 goals. Program goals and priorities ultimately dictate the design of citizen science programs, but for a program to endure and successfully meet its goals, program managers must consider the diverse ways that the nature of the resource being monitored influences public participation in monitoring.     

Physicochemical and thermal characterization of nonedible oilseed residual waste as sustainable solid biofuel

The present study aims to investigate the potential of nonedible oilseed Jatropha (Jatropha curcas) and Karanja (Pongamia pinnata) defatted residual biomasses (whole seed, kernel, and hull), as solid biofuel. These biomasses showed good carbon contents (39.8–44.5%), whereas, fewer amounts were observed for sulfur (0.15–0.90%), chlorine (0.64–1.76%), nitrogen (0.9–7.2%) and ash contents (4.0–8.7%). Their volatile matter (60.23–81.6%) and calorific values (17.68–19.98 MJ/kg) were found to be comparable to coal. FT-IR and chemical analyses supported the presence of good amount of cellulose, hemicellulose and lower lignin. The pellets prepared without any additional binder, showed better compaction ratio, bulk density and compressive strength. XRF analysis carried out for determination of slagging–fouling indices, suggested their ash deposition tendencies in boilers, which can be overcome significantly with the optimization of the blower operations and control of ash depositions. Thus, overall various chemical, physical properties, thermal decomposition, surface morphological studies and their high biofuel reactivity indicated that residual biomasses of Jatropha and Karanja seeds have high potential to be utilized as a solid biofuel.