Assessing of Environmental Quality in Six Areas in India,Sri Lanka and Bangladesh

Environmental quality for environmental health has been examined visually by describing general conditions and drinking water supply, sanitation and solid waste treatment conditions and practices in six South-East Asian villages with a dense population. The environmental review was supplemented by discussions with local people and political and administrative decision makers. Some drinking water analyses were done in order to show the water quality to the local people. The quality of the general conditions and the conditions and practices of drinking water supply, excreta disposal and solid waste treatment practices have been graded with the grading system presented below. The grading could be done in 1 or 2 days in each area by two persons, of which one was an environmental scientist and the other a social scientist, who also knew the local culture and worked as a translator.     

Insights into multisource sludge distributed in the Yangtze River basin, China: Characteristics, correlation, treatment and disposal

Sludge is the by-product of wastewater treatment process. Multisource sludge can be defined as sludge from different sources. Based on the sludge properties of five typical cities in the Yangtze River basin, including Jiujiang, Wuhu, Lu'an, Zhenjiang and Wuhan, this study investigated and summarized the characteristic variations and distribution differences of multiple indicators and substances from municipal sludge, dredged sludge, and river and lake sediments. The results demonstrated pH of multisource sludge was relatively stable in the neutral range. Organic matter and water content among municipal sludge were high and varied considerably between different wastewater treatment plants. Dredged sludge had an obviously higher sand content and wider particle distribution, which could be considered for graded utilization depending on its size. The nutrients composition of river and lake sediments was usually stable and special, with lower nitrogen and phosphorus content but higher potassium levels. The sources of heavy metals and persistent organic pollutants in multisource sludge were correlated, generally much higher among municipal sludge than dredged sludge and river and lake sediments, which were the most important limitation for final land utilization. Despite various properties of multisource sludge, the final fate and destination have some overall similarities, which need to be supplemented and improved by standards and laws. The study provided a preliminary analysis of suitable technical routes for municipal sludge, dredged sludge, river and lake sediments based on their different characteristics respectively, which was of great significance for multisource sludge co-treatment and disposal in the future of China.     

Heterozygosity‐Fitness Correlations and Inbreeding Depression in Two Critically Endangered Mammals

The relation among inbreeding, heterozygosity, and fitness has been studied primarily among outbred populations, and little is known about these phenomena in endangered populations. Most researchers conclude that the relation between coefficient of inbreeding estimated from pedigrees and fitness traits (inbreeding‐fitness correlations) better reflects inbreeding depression than the relation between marker heterozygosity and fitness traits (heterozygosity‐fitness correlations). However, it has been suggested recently that heterozygosity‐fitness correlations should only be expected when inbreeding generates extensive identity disequilibrium (correlations in heterozygosity and homozygosity across loci throughout the genome). We tested this hypothesis in Mohor gazelle (Gazella dama mhorr) and Iberian lynx (Lynx pardinus). For Mohor gazelle, we calculated the inbreeding coefficient and measured heterozygosity at 17 microsatellite loci. For Iberian lynx, we measured heterozygosity at 36 microsatellite loci. In both species we estimated semen quality, a phenotypic trait directly related to fitness that is controlled by many loci and is affected by inbreeding depression. Both species showed evidence of extensive identity disequilibrium, and in both species heterozygosity was associated with semen quality. In the Iberian lynx the low proportion of normal sperm associated with low levels of heterozygosity was so extreme that it is likely to limit the fertility of males. In Mohor gazelle, although heterozygosity was associated with semen quality, inbreeding coefficient was not. This result suggests that when coefficient of inbreeding is calculated on the basis of a genealogy that begins after a long history of inbreeding, the coefficient of inbreeding fails to capture previous demographic information because it is a poor estimator of accumulated individual inbreeding. We conclude that among highly endangered species with extensive identity disequilibrium, examination of heterozygosity‐fitness correlations may be an effective way to detect inbreeding depression, whereas inbreeding‐fitness correlations may be poor indicators of inbreeding depression if the pedigree does not accurately reflect the history of inbreeding. Correlaciones Heterocigosidad‐ Adaptabilidad y Depresión Endogámica en Dos Especies de Mamíferos Críticamente en Peligro     

A methodological framework for improving air quality monitoring network layout. Applications to environment management

This work aims to provide a methodology framework which allows to improve the performance and efficiency of an air quality monitoring network (AQMN). It requires to be constituted by a minimum and reliable number of measurement sites. Nevertheless, the AQMN efficiency should be assessed over time, as a consequence of the possible emergence of new emission sources of air pollutants, which could lead to variations on their spatial distribution within the target area. PM₁₀ particles data monitored by the Community of Madrid's (Spain) AQMN between 2008 and 2017 were used to develop a methodology to optimize the AQMN performance. The annual spatial distribution of average PM₁₀ levels over the studied period monitored by all current stations vs those more representative was provided by a geographic information system (GIS), and the percentage of similarity between both postulates was quantified using simple linear regression (> 95%). As one innovative tool of this study, the practical application of the proposed methodology was validated using PM₁₀ particles data measured by AQMN during 2007 and 2018, reaching a similitude degree higher than 95%. The influence of temporal variation on the proposed methodological framework was around 20%.The proposed methodology sets criteria for identifying non-redundant stations within AQMN, it is also able to appropriately assess the representativeness of fixed monitoring sites within an AQMN and it complements the guidelines set by European legislation on air pollutants monitoring at fixed stations, which could help to tackle efforts to improve the air quality management.     

Applying integrated assessment methodologies to air quality plans: Two European cases

Air pollution Integrated Assessment Models (IAM) can be used for determining how emissions should be reduced to improve air quality and to protect human health in a cost-efficient way. The application of IAM is also useful to spread information to the general public and to explain the effectiveness of proposed Air Quality Plans. In this paper, the application of the RIAT+ system to determine suitable abatement measures to improve the air quality at a regional/local level is presented for two European cases: the Brussels Capital Region (Belgium) and the Porto Urban Area (Portugal). Both regions are affected with PM10 or NO₂ concentrations that exceed the limit values specified by the European Union legislation. To properly assess air quality abatement measures a surrogate model was used, allowing the implementation of an efficient optimization procedure. This model is derived in both cases through a set of simulations performed using a Chemistry Transport Model fed with different emission reduction scenarios. In addition, internal costs (due to the implementation of emission reduction measures) and external costs (due to population exposure to air pollutant concentrations) of policy options were considered. The application of this integrated assessment modelling system in scenario (Brussels case) and optimization (Porto) modes contributes to identifying some advantages and limitations of these two approaches and also provides some guidance when urban air quality has to be assessed.     

室内空气环境质量的探讨

介绍了室内空气环境质量的国内外有关研究成果。内容包括IAQ问题引发关注的缘由,IAQ的影响因素、评价方法及改善IAQ的相关措施。     

Flame behaviors and pressure characteristics of vented dust explosions at elevated static activation overpressures

Dust explosion venting experiments were performed using a 20-L spherical chamber at elevated static activation overpressures larger than 1 bar. Lycopodium dust samples with mean diameter of 70 μm and electric igniters with 0.5 KJ ignition energy were used in the experiments. Explosion overpressures in the chamber and flame appearances near the vent were recorded simultaneously. The results indicated that the flame appeared as the under-expanded free jet with shock diamonds, when the overpressure in the chamber was larger than the critical pressure during the venting process. The flame appeared as the normal constant-pressure combustion when the pressure venting process finished. Three types of venting processes were concluded in the experiments: no secondary flame and no secondary explosion, secondary flame, secondary explosion. The occurrence of the secondary explosions near the vent was related to the vent diameter and the static activation overpressure. Larger diameters and lower static activation overpressures were beneficial to the occurrence of the secondary explosions. In current experiments, the secondary explosions only occurred at the following combinations of the vent diameter and the static activation overpressure: 40 mm and 1.2 bar, 60 mm and 1.2 bar, 60 mm and 1.8 bar.     

贵州织金蒙家大坡地下水水化学特征分析

通过对贵州织金蒙家大坡地下水水化学指标进行分析。结果表明,研究区地下水Ca2+受环境影响最小、空间变异性最小,Na+受环境影响最大、空间变异性最大;各阴阳离子含量与TDS含量呈显著正相关关系,其相关性依次为:Ca2+SO2-4Mg2+Cl-HCO-3K+Na+;TDS含量的增加主要受SO2-4离子的影响,总硬度的变化主要受Ca2+的影响;地下水成分主要来自于碳酸盐矿物的溶解,其次是硫酸盐、含硫矿物、硅酸盐矿物以及盐岩的溶解,地下水类型主要向SO4·HCO3-Ca型和HCO3·SO4-Ca型转化。