输电塔塔-线体系风振反应分析

以5A-ZM2型500kV输电塔塔-线体系为例，建立了塔-线体系ANSYS三维有限元分析模型。依据谐波合成法生成作用在输电塔塔-线体系上的风速时程，在五种攻角风荷载作用下，对输电塔位移、输电线位移、主材应力分布和塔的基底反力进行了计算分析，讨论了输电线与输电塔动力耦合作用对输电塔的影响，并提出一些有益的结论。     

政府突发事件应急能力综合评价

应对突发事件的能力是体现政府执政水平的重要标志之一。提出应充分考虑评价对象的属性以及各评价方法的特点，可以采用层次分析法与模糊综合评价法相结合的方法对政府突发事件应急能力进行评价。运用层次分析法建立层次结构模型，确定指标权重，通过模糊综合评价法构建评价模糊矩阵，进行模糊运算，得出综合评定结果。     

我国民航灾害应急联动机制优化研究

针对我国现行的民航灾害应急联动救援体系所存在着多头指挥、组织形式不明确、责任关系不协调、信息沟通不顺畅、资源调度不合理等问题,运用文献检索、理论分析与实地调研相结合的方法,笔者提出优化思路:民航灾害应急联动机制应以各级民航管理当局的飞行事故应急指挥部为主要指挥决策者,采用虚拟的网络式组织形式,理顺联动单位的责任与关系,将应急联动的信息网络与各地突发公共危机事件的信息平台接轨,成立全国统一的、具有双重功能的民航灾害应急资源调度中心。其中,对民航灾害应急联动虚拟网络组织形式的设计,较好地改进了现行组织的效率,体现了快速反应和协调行动的要求。     

Developing a Standardized Water Quality Index for Evaluating Surface Water Quality1

Abstract: There is a significant need for a science‐based approach to interpret water‐monitoring data and to facilitate the rapid transfer of information to water resource managers and the general public. The water quality Index (WQI) is defined as a single numeric score that describes the surface water quality condition at a particular time and location. The objective of this paper is to describe the WQI concept and the approach for developing an ecoregion‐specific standardized WQI that meets the needs described above. The premise of the proposed WQI is based on categorizing scientifically documented aquatic life responses to changes in instream water chemistry. The method uses an aggregated procedure that matches the entire range of standardized probable biological responses to standardized narrative water quality evaluation categories and standardized rank score categories. The calculation of WQI and decision‐making process are performed within an Excel spreadsheet software program. The article includes examples of the proposed WQI applications that could enhance effective water resource management and facilitate timely communication of water quality conditions to water resource managers and the general public.     

Newspaper response to flood and erosion hazards on the North Lake Erie shore

The study is primarily concerned with newspaper responses to flooding and erosion associated with Great Lakes high water in 1952–1953 and 1972–1974. Underlying the research is a general interest in informing the public more widely on choices available in resource and environmental decision making.     

Blast wave clearing behavior for positive and negative phases

The purpose of the research was to improve prediction of response of buildings to blast waves by including the negative phase and considering clearing of both positive and negative phases. Commonly used structural design practices, which trace their origins to military design manuals, often ignore the negative phase as well as positive phase clearing. For high explosive threats, this approach is conservative in most circumstances. However, negative phase clearing had not previously been studied for blast waves, and the implications for structural response had not been evaluated. This paper presents results of modeling negative phase blast clearing behavior for a typical blast wave and discusses the differences from positive phase clearing. The implications of including positive and negative phase clearing in building blast damage analysis are also investigated through single-degree-of-freedom (SDOF) analyses.Blast waves from explosion sources like a vapor cloud explosion (VCE), pressure vessel burst or high explosive exhibit both positive and negative phases, and the relative magnitude of the positive and negative phases varies among explosion sources and the specific circumstances of each source. A fully reflected blast wave is produced if an incident blast wave were to strike an infinitely tall and wide wall in a normal orientation. Both the positive and negative phases of the blast wave are enhanced by the reflection process. However, when an incident blast wave strikes a wall of finite size in a normal orientation, rarefaction waves are created at the edges of the wall, and the rarefactions sweep down from the roof and inward from sides. The rarefaction waves result in a clearing effect for both the positive and negative phases.Clearing relieves some of the applied blast load on the reflected wall for the positive phase. However, this is not always the case for the negative phase. As shown by the results presented in this paper, clearing may either relieve or enhance the applied negative phase blast load, depending on the duration of the blast wave and the wall dimensions.The impact of negative phase clearing on structural response for generic building components was also investigated. Nonlinear SDOF methods were used to characterize response in terms of peak positive and negative displacements. It was found that the influence of the negative phase is significant and the peak structural response can occur during negative (outward) displacement.     

武汉市城市化过程中的空气质量响应研究

以武汉市2000-2013年的城市化水平和空气质量状况数据为基础,运用主成分分析法和目标比率模型构建综合评价体系,并用多元回归模型进行检验,探究城市化过程中的空气环境质量响应特征.结果表明:1)2000年以来,武汉城市化进入稳增长的快速抬升阶段,空气污染综合指数总体变化平稳,2013年有变坏的趋势;2)不同类型的污染物对城市化水平具有不同的响应规律和影响程度,SO2为倒“U”型,表明随着城市发展,SO2浓度得到控制并呈下降趋势;NO2为“U”型,近9年来NO2浓度不减反增,对空气环境污染严重;而PM10及空气质量综合水平表现为倒“N”型特征,表明现阶段空间环境呈现污染加重的趋势;3)城市化快速扩张过程中的基础设施建设、建筑扬尘,汽车尾气排放、工业烟尘等是影响武汉空间环境质量的主要因素,需有针对性地加强城市空气环境管理.     

火灾中液化气储罐热响应CFD模拟的UDF程序设计

为了降低火灾环境下储罐内部介质热响应及储罐失效试验研究的成本和风险,更好地为储罐事故的预测预防提供模拟依据,利用Fluent 12.0软件对密闭容器内部介质的传热传质过程进行模拟,给出了内部介质在受热和冷却条件下相变的控制方程;通过考虑内部介质气化热随温度的变化及饱和温度与区域单元压力之间的关系,编写了内部介质在受热和冷却条件下质量和能量源项的用户自定义函数(UDF);通过对部分参数进行简化,分别给出了喷射火和池火条件下丙烷储罐热响应模拟的结果,并与试验结果进行了对比.结果表明:储罐热响应各主要参数(内部介质温度、壁面温度,储罐内部压力)的误差在喷射火条件下低于15％,在池火条件下低于12.4％.这表明模拟所需源项UDF正确,可以用于现实储罐热响应的模拟.     

微波诱导热解法制备落叶吸附剂及其工艺优化

采用微波诱导热解法制备低成本落叶吸附剂,以实现落叶的资源化利用.以碘吸附值为响应值,采用响应面分析法研究了微波诱导热解法制备落叶吸附剂的工艺条件.结果表明,热解时间与微波功率之间存在交互作用,当热解功率增加时,可适当缩短热解时间.落叶吸附剂的最佳制备工艺条件为:热解时间4.04 min,微波功率488.72W,氯化锌质量分数27％.落叶吸附剂以微孔吸附为主,BJH孔径分布较窄,孔容最高峰对应的孔径在1.9 nm左右,Langmuir比表面积为769.61 m2/g.     

Research on transesterification parameters for producing plant sterols with supercritical methanol

The supercritical fluid method, regarded as a type of individual production process in the course of preparing plant sterols, has become a promising technology, which possesses advantages of high conversion rate without any pretreatment and need of a catalyst. This study examined the reaction process of the deodorizer distillate (DOD), which mainly included the direct transesterification of DOD to convert into free sterols. The effects of the ratio of methanol to DOD, reaction temperature and time on transesterification were studied. Furthermore, the interactions between different factors were also assessed using the response surface methodology. The optimal conditions obtained were as follows: reaction temperature 553 K, reaction time 80 min, and CH₃OH: DOD = 25:1 (mass ratio). Under these conditions, 36.42% sterol concentration was obtained, which is significantly higher in comparison with the initial sterols’ concentration in raw material (22.45%).