INCOME DISTRIBUTION IMPACTS OF A WATER DEVELOPMENT PROJECT - BOISE PROJECT,IDAHO, 1950–19701

ABSTRACT: Public investments in water resource development projects are continually under scrutiny in terms of economic, environmental, and social impacts. Results of an analysis of a water development project that supplies irrigation water in Idaho are discussed in terms of the impact on income distribution and income growth 44 to 64 years after the project was initiated. Gini ratios for the rural farm population of these counties were consistently lower than they were for the United States as a whole and for the state of Idaho. In addition, income distributions tended to become more equitable over time in the water project counties. Rural farm population income growth rates were found to be similar to those for the nation as a whole. Some of the reasons for these results may be related to the tendency for income distribution to become more equitable as income increases, and the fact that average farm size is relatively small.     

SEISMIC REFRACTION ANALYSIS OF WATERSHED MANTLE RELATED TO SOIL,GEOLOGY AND HYDROLOGY1

ABSTRACT: An extensive hammer seismic refraction survey was carried out in three contiguous watersheds (217, 89, and 190 acres) on a laccolith near Sturgis, South Dakota to test its utility in rugged mountain terrain. Isopachs (lines connecting points of equal mantle thickness), area-elevation curves (hypsometry), and structure contours were used together with drill cores, petrography, hydrographs, and soil information to interpret the nature and role of porous mantle in the waterflow behavior of the watersheds. Refraction profiles produced only one geologically meaningful seismic contrast within the loccolith. Drill cores indicated a shallow stony profile on a sheeted horizon terminating on isotropic crystalline rock impervious except for tight joints. Means of refraction and core interpretations were not statistically different. Apparent seismic discontinuities deeper within the bedrock lacked geological identity. Storm hydrographs and water yields are better related to soil type differences and porous mantle distribution than to average porous mantle depth. On the other hand, slope of flow-duration curves correlate with average porous mantle depth. Porous mantle isopachs also indicate that measured flow from each basin is total area flow. Thus, porous mantle isopachs and hypsometry, and soil type delineation are complimentary in our interpretation of watershed behavior.     

Use of Approximate Inference in an Index of Completeness of Biological Inventories

Abstract:  To assess the completeness of a floristic or faunal inventory, one may use the ratio of the observed number of species to the "true number" of species ( C ). If the inventory is complete , C = 1. The estimate of the true number can be obtained from accumulation curves, nonparametric methods, or other techniques. We devised a simple method for computing confidence intervals (CI) for C and for evaluating the null hypothesis that the inventory is complete. The method is based on the assumptions that an estimate of the variance of the true number of species is known and that the distribution of the estimator of the true number of species is approximately normal. We applied our method to bird inventories in the Balsas Basin of Mexico. The completeness index for subtransects were lower (84.0, 85.4, and 89.9%) than for the whole transect (91.6%) (all significantly different from 100%). Thus, these particular inventories were incomplete at 2 spatial resolutions. Our method of estimating CI for C can be used to estimate species richness obtained from databases of different sites or to test the null hypothesis that an inventory derived from a database is complete.     

Effect of particle size on CO adsorption and thermodynamic analysis

The liquid nitrogen adsorption method was used to characterize the pore structure of non-cohesive coal in the 061,404 working face of the Lingxin coal mine. The amount of specific surface area of micropores in the sample continuously rose as particle sizes reduced. The volumetric method was used to measure the CO isothermal adsorption curves of three samples (sample I, 0.425–0.25 mm, sample II, 0.18–0.25 mm, and sample III, 0.15–0.18 mm). The experimental results were fitted by the Langmuir model. According to the experimental results, it was conducive to CO adsorption with the conditions of high pressure and low-temperature. The decrease in grain diameter increased the number and volume of micropores in the sample, which improved the adsorption capacity of the sample. In addition, according to the adsorption data, the CO adsorption thermodynamics of three samples were analyzed, including surface potential (Ω), Gibbs free energy change (ΔG) and entropy change (ΔS). The results demonstrated that CO adsorption by coal was a spontaneous process. Sample III has the most substantial adsorption capacity, whereas the sample I has the weakest adsorption capacity.     

Recovery in Naturally Dynamic Environments: A Case Study from the Sperrgebiet,Southern African Arid Succulent Karoo

Little is known about the process of vegetation recovery and associated time frames in the Succulent Karoo Biome of southern Africa. This study investigated the recovery of vegetation on sites impacted by mining (different types of dumps and mined areas) in the arid succulent karoo. The main aim of this study was to determine the state of recovery, time frames, successional stages, and the influence of environmental factors on recovery of coastal dune and sand plain plant communities. For this purpose, vegetation was recorded on some 121 sites throughout a coastal strip of approximately 100 × 3 km in Namibia’s restricted diamond area (Sperrgebiet). Using the species pool concept to derive vegetation reference sites and dominance-diversity curves, recovery of vegetation (measured in terms of species richness and cover) in these altered landscapes reached about 46% on the oldest, 51-year-old mine dumps. However, based on species richness, richness levels similar to the undisturbed reference sites were recorded after 30 years, following a logarithmic trend. Successional stages of natural recovery were indicated in this dynamic coastal environment and Cladoraphis cyperoides and Galenia fruticosa appear to be early successional species. Scaling up of studies to landscape level and developing a target community using the species pool concept are discussed as means to measure recovery in dynamic biological communities. On these altered, man-made landforms, the availability of seed may be the bottleneck to achieve vegetation cover comparable to undisturbed vegetation in the surrounding. Hence, restoration efforts should focus on this aspect.     

Environmental resource footprinting of drug manufacturing: Effects of scale-up and tablet dosage

The formulation and scale-up of batch processes is one of the major challenges in the development of pharmaceutical dosage forms and at the same time a significant resource demanding process which is generally overlooked in environmental sustainability assessments. First, this paper proposes general trends in the experience curve of cumulative resource consumption of pharmaceutical tablet manufacturing of PREZISTA^® 800 mg through wet granulation (WG) at four consecutive scales in both R&D and manufacturing environments (resp. WG1 = 1 kg/h, WG5 = 5 kg/h, WG30 = 30 kg/h and WG240 = 240 kg/h). Second, the authors aim at evaluating the environmental impact from a life cycle perspective of a daily consumption of PREZISTA^® 2× 400 mg tablets versus the bioequivalent PREZISTA^® 800 mg tablet which was launched to enhance patient compliance. Environmental sustainability assessment was conducted at three different system boundaries, which enables identification, localization and eventually reduction of burdens, in this case natural resource extraction. Exergy Analysis (EA) was used at process level (α) and plant level (β) while a cradle-to-gate Exergetic Life Cycle Assessment (ELCA) was conducted at the overall industrial level (γ) by means of the CEENE method (Cumulative Exergy Extraction from the Natural Environment). Life cycle stages taken into account are Active Pharmaceutical Ingredient (API) production, Drug Product (DP) production and Packaging. At process level (α), the total resource extraction for the manufacturing of one daily dose of PREZISTA^® (800 mg tablet) amounted up to 0.44 MJ_ex at the smallest scale (WG1) while this amount proved to be reduced by 58%, 79% and 83% at WG5, WG30 and WG240 respectively. Expanding the boundaries to the overall industrial level (γ) reveals that the main resource demand is at the production of the Active Pharmaceutical Ingredient (API), excipients, packaging materials and cleaning media used in DP production. At the largest scale (WG240) the use of cleaning media during DP production contributes considerably less to the total resource extraction. Overall, the effect of scale-up and learning on resource consumption during DP production showed to possess a power-law experience curve y = 2.40 * x^−0.57 when shifting from WG1 (smallest lab scale) to WG240 (industrial manufacturing). Tablet dosage (2× 400 mg versus 1× 800 mg) did not significantly affect the absolute environmental burden. However, the relative contribution of resource categories did change due to the different production technology. It could be concluded that in meeting social and economic demands by launching the PREZISTA^® 800 mg tablet, no trade-off in environmental burden occurred. On the long term, future research should strive to take into account R&D processes and all services related to pipeline activities taking place prior to market launch and eventually to allocate impacts to the final product.     

Proposal of Indicators to Assess Urban Sustainability in Brazil

The research related here focuses on municipal situations where problems of sustainability may be defined and tackled on the basis of bottom-up management procedures with the participation of organized society. The aim is to build management models that may be implemented with reasonable administrative effort and cost. Implementation pursues the target of approaching a sustainable situation in the municipality. Environmental parameters for an ideal municipality with undefined geographical location are presented. For each parameter, a set of indicators is developed that can measure the prospect of sustainability. The indicators are defined in terms of numbers or literal concepts according to the possibility of measurement. Examples of management models are presented, which are able to approach the situation defined as sustainable by the indicators. The basic management tool is the learning curve of targeted communities, which is experimentally developed and applied. The indicators are grouped according to their range of applicability.     

SYNTHESIS OF FLOW-DURATION CURVES FOR UNREGULATED STREAMS IN NEW HAMPSHIRE1

ABSTRACT: Flow-duration curves are concise pictures of flow variability at a point on a stream, and provide essential information for all water-resource planning. In New Hampshire, useful estimates of flow-duration curves for ungaged points on unregulated streams can be made using only information readily available from contour maps: 1) area of the basin above the point of interest; and 2) either the measured mean basin elevation or the elevations of the highest and lowest points in the basin. Measured or estimated mean basin elevation is then used in regression equations to estimate mean flow QC and the flow exceeded 95% of the time, Q₉₅. QC is assumed to occur at the 27% exceedance frequency. Q₀₂, Q₀₅, and Q₃₀ are estimated as multiples of QC. Equations are provided for calculating 95% confidence intervals for future estimates using the method. The dependence of mean flow on elevation is due to positive vertical precipitation gradients and negative vertical evapotranspiration gradients. The dependence of Q₉₅ on elevation appears to be due largely to the fact that it rains more often, that snowmelt takes longer, and that evapotranspiration is reduced at higher elevations.     

Evaluating non-equilibrium solute transport in small soil columns

Displacement studies on leaching of bromide and two pesticides (atrazine and isoproturon) were conducted under unsaturated steady state flow conditions in 24 small undisturbed soil columns (5.7 cm in diameter and 10 cm long) each collected from two sites differing in soil structure and organic carbon content in North Germany. There were large and irregular variabilities in the characteristics of both soils, as well as in the shapes of breakthrough curves (BTCs) of different columns, including some with early breakthrough and increased tailing, qualitatively indicating the presence of preferential flow. It was estimated that one preferential flow column (PFC) at site A, and four at site B, contributed, respectively to 11% and 58% of the accumulated leached fraction and to more than 80% of the maximum observed standard deviation (SD) in the field-scale concentration and mass flux of pesticides at two sites. The bromide BTCs of two sites were analyzed with the equilibrium convection-dispersion equation (CDE) and a non-equilibrium two-region/mobile-immobile model. Transport parameters of these models for individual BTCs were determined using a curve fitting program, CXTFIT, and by the time moment method. For the CDE based equilibrium model, the mean values of retardation factor, R, considered separately for all columns, PFCs or non-preferential flow columns (NPFCs) were comparable for the two methods; significant differences were observed in the values of dispersion coefficients of two sites using the two estimation methods. It was inferred from the estimated parameters of non-equilibrium model that 5-12% of water at site A, and 12% at site B, was immobile during displacement in NPFCs. The corresponding values for PFCs of two sites were much larger, ranging from 25% to 51% by CXTFIT and from 24% to 72% by the moment method, suggesting the role of certain mechanisms other than immobile water in higher degrees of non-equilibrium in these columns. Peclet numbers in PFCs of both sites were consistently smaller than five, indicating the inadequacy of the non-equilibrium model to incorporate the effect of all forms of non-equilibrium in PFCs. Overall, the BTCs of individual NPFCs, PFCs and of field average concentration at the two sites were better reproduced with parameters obtained from CXTFIT than by the moment method. The moment method failed to capture the peak concentrations in PFCs, but tended to describe the desorption and tail branches of BTCs better than the curve fitting approach.