矿用润湿型压裂液的制备与性能分析*

为有效减少煤矿开采时粉尘的生成量,降低综采区粉尘含量。基于自由基聚合和季铵化反应制备1种润湿型压裂液。通过单因素实验,确定最优配比是200 mL水,5 g油酸,0.3 g过硫酸钾,3 g N,N′-亚甲基双丙烯酰胺,2 mL环氧氯丙烷,2 g氯化钾和2 g水杨酸钠。对压裂液的反应过程、微观结构、剪切黏度、剪切稳定性、滤失性、润湿型性和清洁性进行研究。研究结果表明:该压裂液具有较高的剪切黏度和较佳的剪切稳定性,有利于注入煤层;具有较低的滤失性,便于压裂造缝;具有良好的润湿能力,能够有效地渗透到煤层中去;具有残渣含量少等特点,清洁性良好。     

Effects of copper chloride on formation of polychlorinated dibenzo-p-dioxins in model waste incineration

Combustion experiments in a laboratory-scale fluidized-bed reactor were conducted to elucidate the effects of copper chloride as a catalyst on polychlorinated dibenzo-p-dioxins (PCDDs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl₂ · 2H₂O), both of which contained polyvinyl chloride as a chlorine source. Combustion temperature was set to 900 °C, and the amount of air supplied was twice the stoichiometric ratio. The experimental setup was carefully planned to suppress the influences of experimental conditions except the waste composition. Results of these experiments showed that copper chloride in the waste increased the amount of PCDDs formed and made the homologue profile to shift towards the highly chlorinated species. Copper chloride contributes to the PCDDs formation by promoting chlorination, whereby the reaction is important in that organic matter is chlorinated directly by copper compounds. Copper chloride did not exert a great influence on the isomer distribution patterns of PCDDs, while there appeared a significant difference in the case of PCDFs. This points out the difference of the major formation mechanisms between PCDDs and PCDFs. PCDDs are less formed by the catalytic reactions from carbon/polycyclic aromatic hydrocarbons than PCDFs in our experimental conditions.     

Calorimetric behaviors of hydroxylamine and its salts caused by Fe(III)

The objective of this study is to obtain information on the calorimetric behaviors of aqueous solutions of hydroxylamine (HA), hydroxylamine chloride (HACl), and hydroxylamine nitrate(HAN) caused by different Fe(III) states (free Fe(III) from Fe(NH₄)(SO₄)₂, Fe(CN)₆³⁻, and Fe(EDTA)⁻). The calorimetric data were obtained with a small-scaled reaction calorimeter, Super-CRC.

In the mixing with Fe(III), HA showed the highest reactivity among three substrates. Free Fe(III) and Fe(EDTA)⁻ showed catalytic effects in the reactions. In the overall heat of reactions, Fe(EDTA)⁻ exceeded free Fe(III), which precipitated as Fe(OH)₃ and decreased the chances of interactions with HA. It was suggested that the generation of NH₃ had taken place in the process of reducing HA along with Fe(II) oxidation. Fe(CN)₆³⁻ was less reactive than free Fe(III) and Fe(EDTA)⁻.

The ability of masking Fe(III) was estimated for CyDTA. The HA including CyDTA had no exothermic peak; however, there was an endothermic peak of the heat flow at Fe(III) injection. CyDTA was found to have the ability to inhibit a violent exothermic reaction of HA.     

基于详细化学动力学的甲烷热着火影响因素分析

利用化学动力学软件CHEMKIN4.1,在不同初始温度、浓度、湿度和压强下,对甲烷热着火进行了详细化学动力学 模拟。通过对主要组分摩尔浓度分析和温度敏感性分析,得到了甲烷热着火过程的主要基元反应和引发热着火发生的主 要原因。通过对甲烷热着火的延迟时间、热着火发生后主要生成物摩尔浓度和反应后的温度的对比分析,揭示了初始浓 度、湿度和压强对甲烷热着火的影响规律。本研究可以为甲烷为主的气体如瓦斯、天然气等可燃气体的燃烧和爆炸提供 理论支撑,从而有效利用这些可燃气体,降低灾害的发生。     

劳动负荷与作业能力研究

劳动负荷的提高会导致作业疲劳,但适当的劳动负荷对作业能力的提高可能有一定促进作用。设计实验,分析了RPE值和相对心率的相关性,并以相对心率和RPE值为解释变量,分析了它们和反应时、两点阈之间的关系,发现反应时和两点阈在负荷增加过程中存在一个最小值点,而导致这个点出现的劳动负荷即为最佳负荷。以此最佳负荷量安排作业对合理利用劳动力,提高劳动效率,保护劳动者有一定的意义。     

脉冲电晕等离子体降解有毒气体

采用脉冲电晕放电等离子体对化学毒剂模拟剂氯膦酸二乙酯(DECP)进行降解,结果表明,对初始浓度为70 mg·m-3的DECP降解率为96.4%.通过GC-MS和离子色谱分析,其降解产物主要有CHCl2-CH2Cl、CHCl2-CHCl2、二氯膦酸乙酯、HCl和H3PO4,并根据降解产物探讨了等离子体对DECP的降解反应机理.DECP分子中的P—Cl和C—O键断裂促使DECP矿化为H3PO4和HCl,而C—O键断裂形成的乙基与氯自由基反应形成CHCl2-CH2Cl和CHCl2-CHCl2;同时DECP分子中的一个P—O键发生断裂后与氯自由基结合形成了二氯膦酸乙酯.对DECP的反应动力学进行了分析讨论,得到其反应速率常数为0.0516 m.3(W.h)-1.     

氯化镉和敌敌畏突发胁迫下斑马鱼的行为差异

采用计算机摄像跟踪技术,以正常水体中斑马鱼的行为变化为基础,比较突发性氯化镉和敌敌畏污染胁迫下斑马鱼的个体行为(游动速度、深度、转弯次数和加速度)和鱼群行为(平均距离和分散度)的变化规律.研究结果表明:斑马鱼在两种污染物突发性胁迫下,行为反应快速且敏感,游动行为响应与污染物种类和暴露时间直接相关;两种不同类型的污染胁迫...     

地铁盾构施工负环管片安全拆除条件及实例研究

盾构始发是盾构工法的重要施工工序之一,也是盾构施工中最容易发生事故的环节,关系到盾构隧道能否顺利掘进与及时贯通。以北京地铁为例研究了地铁盾构施工负环管片安全拆除条件问题,采用FLAC3D进行了三维模型计算分析,分析了负环管片的位移及反力架应力变化情况,实测了盾构始发段的土压力、注浆压力、盾构推力、负环管片位移、反力架应力变化规律;通过数值计算与实际监测结果的比较,给出了负环管片及反力架的安全拆除条件建议。结果表明:当负环管片的相对位移变化量趋近于零、反力架应力值基本趋于稳定时,隧道衬砌管片环与壁厚注浆及围岩之间的摩擦力足以平衡盾构推力,方能拆除负环管片与反力架。数值分析与实测结果相吻合,说明数值计算模型合理,结果可靠。     

煤低温氧化的实验研究及动力学分析

运用热分析的技术研究阳泉煤的氧化热解反应。将实验煤样进行连续加热氧化到一定温度再恒温和分别加热到一定温度然后恒温这两类实验,对比分析该煤样的低温氧化受热情况并进行动力学分析。得出:两类实验中的热重曲线位置的改变陡缓度不一样,试样量越大,气体的扩散阻力越大,相应的热重曲线位置的改变也越显著;煤低温氧化属于一级化学反应,煤低温氧化反应的活化能随着煤的反应过程的深入而增加,而且煤氧化反应过程是个分阶段的、多步反应以及相互联系促进的过程。     

釜式反应器反应失控的温度与压力预测

釜式反应器因反应失控导致爆炸、火灾和有毒物料泄漏事故时有发生.对其反应失控内在规律的研究有助于采取针对性防范措施.本文从事故案例中分析和总结了化工生产中反应失控火灾爆炸事故的原因和事故特征.利用反应系统热量平衡原理和物料气-液相平衡原理,分别对间歇、半连续和连续式釜式反应器建立了反应失控所达到的最大温度和压力预测方法.结合釜式反应器的操作,应用此预测方法计算表明,半连续釜式反应器失控时继续加料,反应失控的绝热温升最大,连续和间歇釜式反应器次之,而半连续釜式反应器失控时停止加料绝热温升值较小;反应器内液体物料的蒸气压以比温升速度更大的速度上升.