Eco-Environmental Degradation in the Source Region of the Yellow River, Northeast Qinghai-Xizang Plateau

The Yellow River is the second longest river in China and the cradle of the Chinese civilization. The source region of the Yellow River is the most important water holding area for the Yellow River, about 49.2% of the whole runoff comes from this region. However, for the special location, it is a region with most fragile eco-environment in China as well. Eco-environmental degradation in the source region of the Yellow River has been a very serious ecological and socially economic problem. According to census data, historical documents and climatic information, during the last half century, especially the last 30 years, great changes have taken place in the eco-environment of this region. Such changes are mainly manifested in the temporal-spatial changes of water environment, deglaciation, permafrost reduction, vegetation degeneracy and desertification extent, which led to land capacity decreasing and river disconnecting. At present, desertification of the region is showing an accelerating tendency. This paper analyzes the present status of eco-environment degradation in this region supported by GIS and RS, as well as field investigation and indoor analysis, based on knowledge, multi-source data is gathered and the classification is worked out, deals with their natural and anthropogenic causes, and points out that in the last half century the desertification and environmental degradation of this region are mainly attributed to human activities under the background of regional climate changes. To halt further degradation of the environment of this region, great efforts should be made to use land resources rationally, develop advantages animal agriculture and protect the natural grassland.     

Status of the Riparian Ecosystem in the Upper San Pedro River, Arizona: Application of an Assessment Model

A portion of Arizona’s San Pedro River is managed as a National Riparian Conservation Area but is potentially affected by ground-water withdrawals beyond the conservation area borders. We applied an assessment model to the Conservation Area as a basis for monitoring long-term changes in riparian ecosystem condition resulting from changes in river water availability, and collected multi-year data on a subset of the most sensitive bioindicators. The assessment model is based on nine vegetation bioindicators that are sensitive to changes in surface water or ground water. Site index scores allow for placement into one of three condition classes, each reflecting particular ranges for site hydrology and vegetation structure. We collected the bioindicator data at 26 sites distributed among 14 reaches that had similar stream flow hydrology (spatial flow intermittency) and geomorphology (channel sinuosity, flood-plain width). Overall, 39% of the riparian corridor fell within condition class 3 (the wettest condition), 55% in condition class 2, and 6% in the driest condition class. Condition class 3 reaches have high cover of herbaceous wetland plants (e.g., Juncus and Schoenoplectus spp.) along the perennial stream channel and dense, multi-aged Populus-Salix woodlands in the flood plain, sustained by shallow ground water in the stream alluvium. In condition class 2, intermittent stream flows result in low cover of streamside wetland herbs, but Populus-Salix remain abundant in the flood plain. Perennial wetland plants are absent from condition class 1, reflecting highly intermittent stream flows; the flood plain is vegetated by Tamarixa small tree that tolerates the deep and fluctuating ground water levels that typify this reach type. Abundance of herbaceous wetland plants and growth rate of Salix gooddingii varied between years with different stream flow rates, indicating utility of these measures for tracking short-term responses to hydrologic change. Repeat measurement of all bioindicators will indicate long-term trends in hydro-vegetational condition.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

长江经济带绿色城镇化效率评价及其影响因素——基于多维城镇化视角

本文引入资源和环境因素,以城镇化综合指数为期望产出,运用SBM方向性距离函数测算了2010—2020年长江经济带112个地级市（州）的绿色城镇化效率,并采用空间面板模型和地理探测器对绿色城镇化效率的影响因素进行实证分析。结果表明：长江经济带绿色城镇化效率整体水平不高,下游地区绿色城镇化效率高于上游和中游地区,资源消耗和环境污染是效率损失的主要来源;绿色城镇化效率表现出较为明显的热点—次热点—次冷点—冷点自东向西的带状分布格局,存在显著的空间正相关性。政府财政支出对绿色城镇化效率产生负向影响,外商直接投资和产业结构对提升绿色城镇化效率有显著的促进作用,且三者的影响具有地区差异性;市场力因素有利于绿色城镇化效率的提高。邻近城市间绿色城镇化效率的空间溢出效应明显,且空间溢出效应是长江经济带绿色城镇化效率空间差异的最主要因素,各因素的影响具有协同增强的作用。     

经济快速增长区土地利用变化对土壤质量影响研究

以苏锡常地区具有典型性的原锡山市不同土地利用类型和不同时间的土壤取样点为研究对象,从时空转换角度分析土地利用变化对土壤质量的影响. 结果表明,1980—1995年,苏锡常地区土地利用结构变动速率为0.59;1995—2000年,苏锡常地区土地利用结构变动速率增加为0.74. 统计分析和独立样本t检验结果表明:1982—2005年原锡山市pH降低0.58,w(有机质)降低1.02 g/kg,w(全氮)降低0.16 g/kg,w(全磷)降低0.48 g/kg,w(速效氮)降低7.63 mg/kg,w(速效磷)增加26.16 mg/kg,w(速效钾)增加36.9 mg/kg,土壤含水率降低0.52%,土壤的相对质量指数降低3.06;在不同土地利用方式下,土壤质量各指标的变化具有明显的差异性.      

"十一五"脱硫计划实施前后长三角地区的硫沉降变化

采用RAINS ASIA模型研究了"十一五"期间长三角地区实施脱硫措施前后硫沉降超临界负荷的变化.结果表明,在90%保证率下,长三角地区硫沉降的临界负荷(以S计,下同)总值为78.38万t/a;2005年该地区硫沉降的超临界负荷总值为27.98万t/a,有45.6%区域面积的硫沉降超过临界负荷;如果不实施脱硫措施,到2010年长三角地区硫沉降超临界负荷的情景将急剧恶化,硫沉降超临界负荷总值将增长18.4%,超临界负荷的区域面积将增加到48.7%;"十一五"脱硫计划如期实施后,2010年长三角地区硫沉降超临界负荷总值将在2005年的基础上下降27.4%,但仍有39.1%的区域面积超过临界负荷,须采取更严格的措施控制硫沉降量.     

南海重点海洋倾倒区表层沉积物富集特征及其潜在生态风险评价

根据2005南海三个重点海洋倾倒区,即九澳岛重点海洋倾倒区、黄茅岛重点海洋倾倒区、汕头重点海洋倾倒区的监测,分析其表层沉积物重金属的监测资料,采用富集系数法和Hakanson潜在生态危害系数法对其富集度和潜在生态危害程度进行了分析和评价.结果表明:在三个倾倒区表层沉积物所监测的重金属中,Cu和Pb元素的富集度相对最高,Hg和Cd元素的富集度较低,从空间上看,潜在生态危害系数评价结果显示,南海三个重点海洋倾倒区表层沉积物中的重金属对海洋生态系统的潜在生态危害非常轻微,均属于轻微潜在生态危害范畴,其中轻微潜在生态危害程度相对较重的是Cd和Hg元素,Cu和Pb元素的轻微生态危害程度较轻.     

公众灾害风险可接受性与避灾意愿的初探——以川渝地区旱灾风险为例

在综述前人研究的基础上,以川渝地区旱灾为例,通过实地调查与访谈,从公众可接受的旱灾损失与频率、假定旱灾风险情景下的避险意愿等角度,对公众旱灾风险可接受性进行了初步探讨。结果表明,公众合理可接受的旱灾损失与频率分别在26.5%~52.8%与32.0%~64.3%区间范围内;并以一般旱灾、严重旱灾风险情景为限制线,确定了公众合理可接受风险区域;随着灾害损失风险增加,公众规避风险投资意愿呈现出中间高两头低的趋势,当灾害损失达到约50%~70%时,公众避险投资意愿达到最高,意愿避险投资占可能损失的比重约为62%。鉴于川渝地区的旱灾形势,今后旱灾风险管理的关键,一是加强对旱灾的监测与预警预报;二是完善旱灾风险的常规化管理,发展高效灌溉农业,充分利用客水资源,完善提高现有农田水网建设;三是积极探索公众-企业-政府多方共同参与的高效风险管理模式。     

Characterizing ionic species in PM2:5 and PM10 in four Pearl River Delta cities, South China

PM_(2.5)and PM_(10)samples were collected at four major cities in the Pearl River Delta(PRD),South China,during winter and summer in 2002.Six water-soluble ions,Na~ ,NH_4~ ,K~ ,Cl~-,NO_3~- and SO_4~(2-)were measured using ion chromatography.On average,ionic species accounted for 53.3% and 40.5% for PM_(2.5)and PM_(10),respectively in winter and 39.4% and 35.2%,respectively in summer. Secondary ions such as sulfate,nitrate and ammonium accounted for the major part of the total ionic species.Sulfate was the most abundant species followed by nitrate.Overall,a regional pollution tendency was shown that there were higher concentrations of sulfate, nitrate and ammonium in Guangzhou City than those in the other PRD cities.Significant seasonal variations were also observed with higher levels of species in winter but lower in summer.The Asian monsoon system was favorable for removal and diffusion of air pollutants in PRD in summer while highly loading of local industrial emissions tended to deteriorate the air quality as well.NO_3~-/SO_4~(2-) ratio indicated that mobile sources have considerably contribution to the urban aerosol,and stationary sources should not be neglected. Besides the primary emissions,complex atmospheric reactions under favorable weather conditions should be paid more attention for the control of primary emission in the PRD region.     

Urban Energy Efficiency from Cities in China and Policy Implications

Using 1995-2006 panel data for 210 cities, this article firstly measures total factor energy efficiency for Chinese cities with constant return to scale data envelopment analysis model,and then describes the features of regional differences. The results show that the changing trend displays four "reversed U" shapes. A turning point of widening gap occurred among cities in 2000 and there was a certain convergence among four regions. Urban energy efficiency level is unstable. Cities with low efficiency and high energy input will be the focus of energy-saving and reducing emissions. According to Tobit model, resource endowment, temperature, industrial structure, technology level and variety of policy factors should be treated differently in different situations.