Feasibility of honeycomb monolith supported sugar catalyst to produce biodiesel from palm fatty acid distillate (PFAD)

Carbon coated monolith was prepared by sucrose solution 65 wt.% via dip-coating method. Sulfonation of incomplete carbonized carbon coated monolith was carried out in order to synthesize solid acid catalyst. The textural structure characteristics of the solid acid catalyst demonstrated a low surface area and pore volume. Palm fatty acid distillate (PFAD), a by-product of palm oil refineries, was utilized as oil source in biodiesel production. The esterification reaction subjected to different reaction conditions was performed by using the sulfonated carbon coated monolith as heterogeneous catalyst. The sulfonation process had been performed by using vapour of concentrated H₂SO₄ that was much easier and efficient than liquid phase sulfonation. Total acidity value of carbon coated monolith was measured for unsulfonated sample (0.5 mmol/g) and sulfonated sample (4.2 mmol/g). The effect of methanol/oil ratio, catalyst amount and reaction time were examined. The maximum methyl ester content was 89% at the optimum condition, i.e. methanol/oil molar ratio (15:1), catalyst amount (2.5 wt.% with respect to PFAD), reaction time (240 min) and temperature 80 °C. The sugar catalyst supported on the honeycomb monolith showed comparable reactivity compared with the sugar catalyst powder. However, the catalyst reusability studies showed decrease in FFA% conversion from 95.3% to 68.8% after four cycles as well as the total acidity of catalyst dropped from the value 4.2 to 3.1 mmol/g during these cycles. This might be likely due to the leaching out of SO₃H group from the sulfonated carbon coated monolith surface. The leaching of active species reached a plateau state after fourth cycle.     

从自燃煤矸石中提取聚合铝铁(PAFC)的试验研究

采用盐酸酸浸的方法从自燃煤矸石中提取聚合铝铁，对煤矸石的粉碎粒径、酸浸盐酸的浓度及用量、酸浸的温度等工艺条件进行了试验研究。结果表明，从100g自燃煤矸石中，可提取19．85g固体聚合铝铁，成品的Al2O3含量33％、Fe2O3含量16％、盐基度70％。     

Evaluation of the biodegradability of copolyesters containing aromatic compounds by investigations of model oligomers

Model oligo esters of terephthalic acid with 1,2-ethanediol, 1,3-propanediol, and 1,4-butanediol have been investigated with regard to their biodegradability in different biological environments. Well-characterized oligomers with weight-average molar masses of from 600 to 2600 g/mol exhibit biodegradation in aqueous systems, soil, and compost at 60°C. SEC investigations showed a fast biological degradation of the oligomer fraction consisting of 1 or 2 repeating units, independent of the diol component used for polycondensation, while polyester oligomers with degrees of polymerization higher than 2 were stable against microbial attack at room temperature in a time frame of 2 months. At 60°C in a compost environment chemical hydrolysis also degrades chains longer than two repeating units, resulting in enhanced degradability of the oligomers. Metabolization of the monomers and the dimers as well by the microorganisms could be confirmed by comparing SEC measurements and carbon balances in a Sturm test experiment. Based on these results degradation characteristics of potential oligomer intermediates resulting from a primary chain scission from copolyesters consisting of aromatic and aliphatic dicarbonic acids can be predicted depending on their composition. These results will have an evident influence on the evaluation of the biodegradability of commercially interesting copolyesters and lead to new ways of tailor-made designing of new biodegradable materials as well.     

Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.     

金沙江对硫酸的缓冲性能分析

本文分析了金沙江对硫酸的缓冲特征，建立了江水的缓冲曲线方程，并且验证了此方程的有效性，证明用此方程预测硫酸进入金沙江后江水pH值的变化情况，其预测准确度在0.2个pH单位内。     

氯酚与富里酸的缔合作用

本文用超滤膜方法证实氯酚与富里酸之间存在缔合作用,并计算出表观缔合常数在２．７＊１０＾３－－１２１＊１０＾３ｍｌ．ｇ＾－１范围内。实验结果表明”ＰＨ、富里酸含量,氯酚取代氯原子个数都能够影响Ｋ值的大小。     

利用原生质体诱变技术筛选脱落酸高产菌株

以葡萄孢属TB-3菌株为出发菌株制备其原生质体．在纤维素酶浓度为20g／L,蜗牛酶浓度为3g／L的酶解系统中,25℃酶解3h,其原生质体制备数可达67×105mL-1,在KYM上的再生率为46．1％,在KPDA上的再生率为33．6％,经过3轮原生质体紫外线诱变后回复再生,及对大量再生突变株进行发酵筛选,获得高产稳定株TB－3H8,其发酵液中ABA的质量浓度可达1．4g／L     

Effects of Acid Rain on Competitive Releases of Cd, Cu, and Zn from Two Natural Soils and Two Contaminated Soils in Hunan, China

Leaching experiments of rebuilt soil columns with two simulated acid rain solutions (pH 4.6–3.8) were conducted for two natural soils and two artificial contaminated soils from Hunan, south-central China, to study effects of acid rain on competitive releases of soil Cd, Cu, and Zn. Distilled water was used in comparison. The results showed that the total releases were Zn>Cu>Cd for the natural soils and Cd>Zn≫Cu for the contaminated soils, which reflected sensitivity of these metals to acid rain. Leached with different acid rain, about 26–76% of external Cd and 11–68% external Zn were released, but more than 99% of external Cu was adsorbed by the soils, and therefore Cu had a different sorption and desorption pattern from Cd and Zn. Metal releases were obviously correlated with releases of TOC in the leachates, which could be described as an exponential equation. Compared with the natural soils, acid rain not only led to changes in total metal contents, but also in metal fraction distributions in the contaminated soils. More acidified soils had a lower sorption capacity to metals, mostly related to soil properties such as pH, organic matter, soil particles, adsorbed SO₄ ²⁻, exchangeable Al³⁺ and H⁺, and contents of Fe₂O₃ and Al₂O₃.     

Method of Testing the Penetration of Acid Solutions Through Safety Gloves

Because they cause burns that are difficult to heal, acids are dangerous, and steps should be taken to ensure that the human skin does not come into contact with them. For this purpose safety gloves are generally used by workers who have to handle acids. Such gloves need to be tested to ensure that they are acid resistant. Standard EN 374 (European Committee for Standardization [CEN], 1993c) specifies a method of testing the permeation of liquid chemicals, on a molecular level, through glove material, but it may be difficult to ensure the fitness of the joints of a two-compartment cell, when gloves are lined with jersey. To deal with this a simple pH-meter method to test the permeation of acid and alkali solutions through safety gloves has been developed. The permeation of H₂S0₄, HCI, HN0₃, and CH₃COOH through gloves made from neoprene, nitrile, and PVC was tested. This method seems to be simple and economical.     

腐殖酸对砂质土壤吸附Cr(VI)的影响

利用系列摇瓶振荡实验,研究了在砂质土壤介质中腐殖酸(HA)对Cr(VI)还原作用及增强土壤表面对其吸附的影响.通过改变反应接触时间、pH值、HA投加量等条件,确定了最佳吸附反应条件.结果表明:砂质土壤中存在HA时,可使Cr(VI)还原为毒性较小的Cr(Ⅲ),明显增强土壤对可溶态Cr离子的吸附能力,比同等条件下无HA的土壤吸附量增大1倍以上.一般整个反应过程约8 h即可达到稳定.pH值对Cr的还原和吸附有很大的影响,酸性条件下的吸附量比碱性条件可增大1倍,最佳pH值为2～4;当pH＞5时吸附能力急剧下降,pH=10时吸附去除量降为20%.有HA存在时砂质土壤土对Cr(VI)的吸附反应为一级动力学反应,K298=0.033 5 min-1,砂土对CrO2-4的等温吸附曲线较好地满足Langmuir公式.