山东博山地下水污染的数学模拟

在分析研究区的水文地质特征和地下水污染情况的基础上，用模糊数学方法进行地下水水质评价，用趋势面分析和Ｋｒｉｇｉｎｇ方法模拟地下水中污染物的空间分布，用灰色系统方法和对流－弥散方程的特征有限元解模拟地下水中污染物随时间的分布并且进行污染的预测，对各种方法的特点和应用条件进行了分析，表明和数学模拟方法进行地下水污染的定量研究是可行的。     

手性污染物环境行为的对映体差异性

环境中手性污染物对映体选择性行为的研究历史不长 ,但由于手性化合物对映体生物活性的差异性 ,手性污染物在环境中的对映体选择性行为已愈来愈引起人们的关注。本文对近 10多年来手性污染物的环境行为研究进行全面评述     

某退役溶剂厂有机物污染场地燃气热脱附原位修复效果试验

热脱附技术一般用于土壤中有机物的异位修复,然而对于受有机物污染较深土壤的原位修复却鲜有报道.本文以某退役溶剂厂土壤中苯、氯苯和石油类为目标污染物,运用燃气热脱附技术进行原位修复.本文介绍了燃气热脱附技术的工艺设计流程,针对场地目标污染物进行燃气热脱附的工程化试验,结果显示热脱附处理后土壤中苯、氯苯和石油类最高去除率接近100%.本文还探讨了温度、停留时间、土壤含水率和土壤质地对热脱附效率的影响,发现在温度和停留时间相同情况下,含水率较小、孔隙率较大的粉砂土热脱附效果更好.试验表明,燃气热脱附原位修复技术处理场地挥发性有机污染物效果良好,可以进行大规模的实际运用.     

环糊精在土壤有机污染物治理中的应用

综述了环糊精及其衍生物在土壤弱极性有机物治理中的应用和原理。环糊精可与土壤中弱极性有机污染物形成主客包合物,从而增加其水溶性促进其从土壤中解吸去除;能够同时去除金属离子;能够改变有机污染物理化性质促进其光解;可降低有机污染物毒性促进其微生物降解。     

Effectiveness of fluidized pellet bed for removing soluble contaminants

Fluidized pellet bed (FPB) has been successfully applied in water and wastewater treatment. However, the removal mechanism of contaminants especially the soluble ones, is still unclear. This study aimed to evaluate the e ectiveness of FPB reactor for removing soluble contaminants from synthetic wastewater. By only coagulation through jar test operation with addition of polyaluminium chloride (PACl) as primary coagulant and polyacryamide (PAM) as coagulant-aid, the removals of soluble chemical oxygen demand (COD), total phosphorus (TP), and NH4 +-N were found to be only 2.2%–7.5%, 5.7%–25.5%, and 9.9%–18.5%, respectively. However, by FPB operation under the same dosage of coagulants, these values increased to 82.7%, 37.2%, and 50%, indicating that the formation of pellets in the FPB e ectively enhanced the removal of soluble contaminants. By careful comparison of the settleablility and filterability of the pollutants after coagulation, the originally soluble contaminants could be divided into three groups, namely: (1) coagulated-andsettleable, (2) coagulated-but-nonsettleable, and (3) uncoagulable. It was found that not only the first two groups but also a large part of the third group could be e ectively removed by FPB operation. However, the mechanism for the removal of the uncoagulable pollutants by FPB operation still needs further investigation.     

污染物质在包气带中运移规律的实验研究

通过室内淋滤实验,研究了酚,氰,砷,汞,铬在粉质轻亚粘土和中砂中的积累,运移规律：（１）土体对污染物质吸附净化均可分为强吸附阶段,饱和吸附阶段和吸附饱和阶段;（２）土体对污染物质的吸附净化强度与其粒度通常呈负相关;（３）酚,氰在包气带中降解的主要原因是自身的挥发性与生物分解作用。证实污染物质在包气带中的主要迁移形式为：Ｈ３ＡｓＯ３,Ｈ２ＡｓＯ３＾－,ＣｒＯ４＾２,Ｈｇ（ＯＨ）＾＋,ＧｇＯＨＣＬ,同     

Understanding and addressing the environmental risk of microplastics

Over the past decades, the plastic production has been dramatically increased. Indeed, a category of small plastic particles mainly with the shapes of fragments, fibers, or spheres, called microplastics (particles smaller than 5 mm) and nanoplastics (particles smaller than 1 μm) have attracted particular attention. Because of its wide distribution in the environment and potential adverse effects to animal and human, microplastic pollution has been reported as a serious environment problem receiving increased attention in recent years. As one of the commonly detected emerging contaminants in the environment, recent evidence indicates that the concentration of microplastics show an increasing trend, for the reason that up to 12.7 million metric tons of plastic litter is released into aquatic environment from land-based sources each year. Furthermore, microplastic exposure levels of model organisms in laboratory studies are usually several orders of magnitude higher than those found in environment, and the microplastics exposure conditions are also different with those observed in the environment. Additionally, the detection of microplastics in feces indicates that they can be excreted out of the bodies of animal and human. Hence, great uncertainties might exist in microplastics exposure and health risk assessment based on current studies, which might be exaggerated. Policies reduce microplastic emission sources and hence minimize their environmental risks are determined. To promote the above policies, we must first overcome the technical obstacles of detecting microplastics in various samples.     

再生水中优先控制有毒污染物的筛查方法

建立了一种适用于再生水中优先控制有毒有机污染物筛查的方法.针对样品前处理方法中的固相萃取柱的选择和洗脱剂条件等进行了优化设计,利用保留时间锁定和谱图解卷积技术分辨复杂系统中的目标污染物,并利用有毒化合物数据库进行有毒污染物甄别.结果表明,采用C18柱串联HLB柱的方法进行富集,用1:1(V/V)的正己烷/二氯甲烷混合溶剂和4:1(V/V)的二氯甲烷/甲醇混合溶剂进行分级洗脱的前处理方法,对分配系数(logKow)在1.48~6.41之间的30种化合物平均回收率在52.1%~138%之间,相对标准偏差值均<13.6%.将该方法应用于天津空港地区再生水中有毒有机污染物的筛查,2007~2008年度2次采集样品分别筛查出30种有毒有机污染物,其中有7种属于《城镇污水处理厂污染物排放标准》中已列入监管范围的污染物,11种未列入排放标准监测范围.比较污水处理厂进、出水以及地表水中检出污染物,发现现有污水处理工艺对筛查出的优先有机污染物处理效果不佳.     

Toxic substances: Measures and measurements†

The formulation of a sound policy for environmental protection and toxic substances control requires knowledge of the presence and concentration of environmental contaminants. For this reason monitoring programs have been set up in the Netherlands for water, drinking water, and air pollution. The Netherlands system for air pollution, monitoring of the substances SO2, NOχ, CO, O₃ is now fully automated. Some examples will be given to show the acquisition and management and interpretation of air pollution measurements.

Various smaller projects, supported by the Department of Health and Environmental Protection include measurement of indoor air‐contaminants, contaminants in soil and hazardous waste sites, and contaminants in biotic samples such as for instance PCB's in eels and seals and mussels. Moreover a Coordinating Committee regularly collects measurements from various sources in the Netherlands regarding pesticide residues and contaminants in food.

For cost‐effective monitoring the accuracy of the measurements must be chosen with regard to the biological effect concentration of the pollutant. The necessity of proper control measurements to establish background levels and the necessity of ring‐tests to increase interlaboratory reproducibility is discussed. In cost‐effective monitoring the minimum number of measurements, which are necessary to check the effect of environmental protection measures, must be defined through proper sampling.     

基于TLSER和QSPR关系预测PAHs和PCBs的LDPE膜-空气分配系数

有机污染物在被动采样材料与环境介质之间的平衡分配系数(K_P),是测定环境中有机污染物浓度的重要参数,但K_P值大部分都需要经过繁琐的实验测定获取,无法逐个测定数量繁多的污染物,因此需开发一种预测K_P值的方法。为此,搜集整理了一些多环芳香烃(PAHs)和多氯联苯(PCBs)的低密度聚乙烯(LDPE)-空气分配系数(K_PA)的实测值,基于理论线性溶解能(TLSER)和定量结构性质关系(QSPR),利用逐步多元线性回归(MLR)分别构建了预测K_PA值的模型。模型的决定系数R2adj分别为0.927和0.956,交叉验证系数Q2LOO分别为0.915和0.946,外部系数Q2ext分别为0.913和0.960。结果表明,2种模型具有良好的拟合优度、稳健性和预测能力,并解释了模型的机理。所构建的2种模型均可用来预测应用域内有机污染物的LDPE膜-空气分配系数。