中扬子台地北缘灯影组碳酸盐岩成岩作用序列及成岩模式

研究区主要的成岩作用类型有胶结、溶解、硅化、白云石化、压实-压溶和去白云石化作用等，详细研究了每种成岩作用的矿物岩石学特征及对孔隙形成、演化的影响。把研究区成岩环境划分为大气淡水成岩环境、海水成岩环境、混合水成岩环境、埋藏成岩环境和晚期表生成岩环境五大类．总结了每种成岩环境的成岩组构特征、成岩标志、δ18O和δC及微量元素Na+、Sr2+的分布规律。此外，还探讨了深水斜坡相粉-细晶白云岩和台地浅滩相颗粒白云岩的成岩演化序列与孔隙演化，最后概括出了研究区碳酸盐岩的成岩作用模式。     

Limb reduction and chorion villus sampling

Upper limb reduction was diagnosed by ultrasound scan at 17 weeks after chorion villus sampling at 9 weeks' gestation. Pregnancy was terminated and necropsy confirmed limb reduction in an otherwise normal fetus. The relationship of limb reduction to amniotic band syndrome is discussed.     

正己烷萃取—此外分光光度法测定矿井水中微量油

在进行矿井水中油类分析时，用正己烷作为萃取剂，以工作曲线代替标准曲线，从而使油平均回收率增加到96％以上。并在正己烷用量、水样预处理等测试参数选择上做了条件试验。     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

硫代氨基甲酸盐提取工业废水中的锌离子

本文主要探索了金属离子络合剂———硫代氨基甲酸盐的合成制备 ,并通过其对锌离子的络合作用 ,以达到脱除金属离子的目的 .实验表明 ,由吗啡啉合成制得的硫代氨基甲酸盐 锌离子络合剂在酸性废水中 ,对锌离子具有良好的络合能力 .通过对废水中金属锌离子的脱除工艺条件的相应探索 ,发现在体系的pH =2～ 6范围内 ,硫代氨基甲酸盐对锌离子的脱除率均达99 %以上     

超临界水处理有机废物研究新进展

超临界水处理废物以通过添加氧化剂的超临界水氧化和不加氧化剂的超临界水萃取两种方式实现，超临界水氧化应用较多，与其它废物处理技术相比有显著优点。本文总结了超临界水氧化流程和反应机理，评述了添加剂，温度，压力及停留时间，催化剂等对超临界水氧化反应的影响，同时介绍了超临界水氧化和超临界水萃取的最新应用研究状况及尚需解决问题。     

北京市工业废水和城市污水中菊酯类农药残留分析

建立了基于18C固相萃取柱和气相色谱/电子捕获（GC/ECD）分析水体中环境激素类物质--菊酯类农药的分析方法,并对方法的回收率、灵敏度进行了评价,同时分析了北京市七类典型污染点源50个采样点位菊酯类农药的浓度,检出的菊酯类农药包括联苯菊酯、氰戊菊酯、氯氰菊酯和溴氰菊酯,其检出率都较低,低于22%.检出菊酯类农药的浓度范围是0.013～1.246μg/L.该方法对菊酯类农药的回收率达到67.7%～96.2%,检测限为0.010～0.015μg/L.溴氰菊酯在废水排放中的达标率为100%.     

小清河干流底质有毒金属形态分布

以小清河干流底质为研究对象，为了更好地了解固体颗粒物上有毒金属被浸取进入液相情况．分析了三种不同浸取剂(DTPA、EDTA、NTA)的提取液中有毒金属Pb、Cr、Cu、Zn、Cd的含量。结果表明．金属浓度因浸取剂种类及金属本身类型不同而不同。由于固体颗粒物上金属的毒性及其可流动性与其存在形态密切相关。选取连续浸取法来考察底质样品中金属形态分布情况。结果表明．底质中Pb主要以氧化物键合态和碳酸键合态存在；Cr主要以有机键合态存在；Cu以有机键合态为优势存在；Zn主要以有机键合态和氧化物键合态存在；Cd主要以可交换态存在。     

利用废渣废碱液年产3000t粒状五水偏硅酸钠工艺初步设计

介绍以铝矾土提取硫酸铝废渣和氧氯化锆副产废碱液为原料生产泡花碱 ,然后利用一次造粒法生产五水偏硅酸钠新工艺确定影响产品质量指标工艺因素。小试试验产品质量指标达到HG/T2 5 6 8- 94要求 ,工艺成本低 ,避免废碱液及废渣排放对环境的污染。     

乙醇环己烷废液的回收

以水为萃取剂，萃取分离乙醇和环己烷，得到乙醇水溶液和粗环己烷。粗环己煊经精馏提纯，得到纯度为９９．９１％的纯品；乙醇水溶液经分馏，ＣａＯ脱水后得无水乙醇，纯度达９９．７４％。