Speciation of particulate trace metals in sediments of Anarbe reservoir∗

Total concentration and chemical forms of heavy metals in samples of sediment from a drinking water reservoir have been analysed. The result of total metal contest shows Fe and Mn concentration increase along the reservoir, from 4.4% in Fe and 0.07% in Mn in the end part to 6.4% Fe and 0.22% Mn at the dam. However, a decrease in organic matter along the reservoir is observed. In order to test the accuracy of the digestion methods used, a standard reference material was also analysed.

Trace metal concentrations, with exception of Cadmium, Pb and Mn, found in fraction 5 are higher than those observed in the others extractions, Fe, Ni, Zn, Cr and Cu content in non‐residual fraction is found mainly in moderately reducible fraction, but the percentage of this fraction in each metal is very different.     

Speciation of heavy metals in sediments from the Scheldt estuary,Belgium

A simple three-step sequential extraction procedure was applied to study the speciation of heavy metals in sediment from Scheldt estuary, and their relationship to sediment grain size and organic matter content. The sedimentary metal content was fractionated into carbonate and exchangeable, metals bound to organic matter and residual fractions. Sedimentary total metal content was also determined using an industrial microwave (ETHOS 900) HF/HNO₃ extraction method. The extracts were analysed for metals using inductively coupled plasma atomic emission spectrometry. The bioavailable fraction (exchangeable and metals bound to organic matter) comprised less than the other forms. Residue metals were the dominant form of metals in almost all studied sites. The average total metal content for the studied sites decreased in the order Fe>Cr>Cu>Co>Zn>Pb>Cd. Based on average values for the studied sites, the highest bioavailable metals in sediments were Cd (38%) from Westkapelle, Zn (17%) from Yerseke, Co (12%) from Domburg, Cr (9%) from Vlissingen, Fe and Pb each (2%) from Yerseke, and Cu (1%) from Domburg. Metal recovery was good, with<10% difference between the total metal recovered through the extractant steps and the total metal determined using HF/HNO₃ extract.     

A comparative study of three different methods for the sequential extraction of heavy metals in soil

Three different methods for the sequential extraction of heavy metals from soil (viz those of Tessier et al. (A. Tessier, P.G. Campbell and N. Bisson (1979). Anal. Chem., 51, 844.), Sposito et al. (G. Sposito, L.J. Lund and A.C. Chang (1989). Soil. Sci. Soc. Am. J., 46, 260.) and Mann and Ritchie (S.S. Mann and G.S.P. Ritchie (1993). Aust. J. Soil Res., 31, 255.)) were examined in terms of the distribution of Cu, Zn and Pb in the soil phases and the bioavailability of these elements in soil. To this end, several samples of soils polluted with metals from a copper mine were fractionated by using the three studied methods and analyzed by atomic absorption spectrometry. The results revealed differences in extraction efficiency among the methods due to the extractant used, or its concentration, and to the soil/solution ratio. The three methods were found to provide accurate heavy metal background contents. However, the method of Tessier et al. is to be preferred for quantifying increased levels of heavy metals on account of its high extraction power.     

基于范例推理的灾害性地震应急物资需求预测研究

基于范例推理(CBR)理论,利用最近相邻法和粗糙集理论搜索相似度最高的主震历史范例,分析各主要物资需求量的影响因素,预测当前范例主震期应急物资需求量。通过序贯决策,采用马尔科夫预测模型预测余震类型,进而搜索余震历史范例,预测余震期应急物资需求量。以"玉树"地震为例,运用该方法估算地震发生后食物类、生活用品类、药品类、工程机械类的需求量。     

逐级提取(SEE)技术及其在沉积物和土壤元素形态研究中的应用

概述了元素形态的研究方法,介绍了SEE技术及其在沉积物、土壤元素形态研究中的应用,并就该技术在元素形态研究中的作用、实现标准化的可能性及难度、未来发展趋势等问题进行了探讨,得出了以下三点认识:(1)SEE技术是目前沉积物、土壤元素形态研究的必要手段,但其在未来元素形态研究中的作用,在很大程度上取决于技术本身的标准化和新发展以及其它形态分析方法的发展;(2)根据研究目的,系统研究不同样品的采集和预处理方法、试剂种类和浓度以及操作条件等元素形态影响因素,对现有流程进行改进或提出新的更合理的流程,作为SEE技术的标准流程,是必要且可能的,但其任务也是艰巨的;(3)SEE技术可能向两个趋势发展,分别形成微波加热-连续流-逐级提取(MCSE)技术以及微波加热-超声波震荡-动力学-平行提取(MUKPE)技术。     

QuickPanel在油浆过滤自动控制系统中的应用研究

阐述了油浆过滤控制系统的硬件配置、分程控制及顺序控制等．通过控制系统的控制,过滤器A、B轮流进行过滤、再生步骤,将油品内51μm以上的颗粒过滤掉,达到提高油品质量、延迟装置检维修期的目标．图1,参5．     

干法烟气脱硫副产物中汞的形态分布

通过分析干法烟气脱硫副产物中不同形态汞的含量,研究干法脱硫灰中汞的环境稳定性. 利用逐级化学提取法,分析了锅炉底灰、锅炉飞灰、脱硫塔底灰和除尘器灰中水溶态、酸溶态、过氧化氢溶态及王水溶残渣态汞的含量,研究了不同形态汞含量的变化规律. 结果表明,锅炉底灰、锅炉飞灰、脱硫塔底灰和除尘器灰中w（总汞）分别为0.23,0.36,0.46和1.22 mg/kg,且随着脱硫除尘时间的延长w（总汞）呈增加的趋势,其中,以氯化物、硝酸盐和硫酸盐存在的水溶态汞变化明显,除尘器灰中w（水溶态汞）高达0.72 mg/kg. 分析认为,干法烟气脱硫灰吸附的大部分汞蒸气转化为可溶性的氯化物、硝酸盐和硫酸盐等,另外还有少量汞以单质状态存在.      

煤及木材燃烧飞灰中有毒金属形态分布

选取３各燃煤产生的飞灰颗粒物和一种燃木产生的飞灰作为研究对象,为了更好地了解颗粒物上有毒金属被浸取进入液相情况,分析３种不同浸取剂（二乙三氯五乙酸（ＤＴＰＡ）、乙二胺四乙酸（ＥＤＴＡ）和氨三乙酸（ＮＴＡ））的提取液中有毒金属Ｐｂ、Ｃｒ、Ｃｏ、Ｎｉ、Ｍｎ、Ｃｕ、Ｚｎ、Ｃｄ、Ａｓ、Ｓｒ等的含量。结果表明,金属浓度因飞灰种类、浸取剂种类及金属本身类型不同而不同。由于颗粒物上金属的生物可利用性、毒性及可流     

城区叶面尘特性及其多环芳烃含量

用多步连续洗脱方法采集了干线道路路侧和远离道路校园内冬青卫矛叶面积尘,研究了叶面尘的采集方法.测定了2类叶面尘的粒径分布、有机碳含量和多环芳烃含量.结果表明,所测样品上的叶面尘可以在超声条件下4min一步洗脱.路边样品叶面尘积累量几乎是校园样品的2倍.2样品粒径分布基本形态非常相似,包括200μm以上和以下2个组分.后者占绝对优势.但校园内样品叶面尘粒径明显小于路边样品,两者粒径中位数分别为17.2μm和23.1μm.路边样中相对较粗部分显然来自机动车行驶扰动.由于颗粒较细,采自校园叶面尘中多环芳烃含量略高于路边样品.但不同多环芳烃分布谱非常相似.     

滇池沉积物有机磷形态分级特征

考察沉积物磷对湖泊富营养化贡献时,大量研究涉足无机磷,对有机磷的研究十分薄弱.针对滇池的33个沉积物样品,采用有机磷分级提取方法,将沉积物有机磷分为活性磷、中等活性磷、非活性磷等三种具有不同稳定性的有机磷.结果表明:排除滇池西北部外源污染严重的样品后,沉积物有机磷与总磷有自北向南逐渐降低的变化趋势,有机质与总磷、活性有机磷、中等活性有机磷以及非活性有机磷都表现出了显著相关关系.沉积物活性有机磷和中等活性有机磷与NaHCO3提取无机磷均显著相关,说明二者具有潜在的生物有效性.