显微镜法测定粉尘分散度存在的问题

通过对显微镜分辨力的分析,指出当前常用的用显微镜来测定粉尘分散度的方法在实际运用中存在的问题,希望粉尘分散度的测定方法能得到进一步的完善。     

校办产业效益的评价指标、原则及其优化模式

本文通过分析校办产业效果指标体系的构成,探讨了校办产业效益的均衡协调发展理论,提出了评价校办产业效益的５个有利原则,并在此基础上探索了提高校办产业综合效益的４种系统优化模式     

Plasticity of social organization in a forest ant species

We manipulated availability of food and nesting sites in one population of the forest ant Myrmica punctiventris. The manipulations produced significant changes in relatedness structure, reproductive allocation, and response to hierarchical selection. Food availability appeared to have a consistently stronger influence on these aspects of social organization than did availability of nesting sites. We interpret our experimental results in light of observed differences between populations, and discuss implications for kin selection dynamics. Received: 30 July 1998 / Accepted after revision: 31 October 1998     

垃圾填埋场渗滤液处理工艺研究

通过对垃圾填埋处理场渗滤液的处理工艺研究,并根据渗滤液的特性建立一套适合我国实际的 Ａ— Ｏ— Ｃ— Ｃ Ｌ 处理工艺．试验研究结果表明,出水ρ（ Ｃ Ｏ Ｄ Ｃｒ） ＝ ２０５ ．６ ｍｇ Ｌ－ １ 、ρ（ Ｂ Ｏ Ｄ５） ＝ １８ ．２ ｍｇ Ｌ－ １ 、ρ（ Ｎ Ｈ３ － Ｎ） ≈０ｍｇ Ｌ－ １ 、色度＝ ４０（ 倍） 、ｎ（ 大肠菌群数） ＝ ２００ 个 Ｌ－ １ ．达到 Ｇ Ｂ１６８８９ － １９９７《生活垃圾填埋污染控制标准》中对垃圾渗滤液排放要求的二级标准     

活性炭固定沉积物中HCHs和DDTs的研究

在对沉积物的修复技术中,原位覆盖技术能够降低污染物向水体的释放,降低污染物对底栖生物和水生生物的生物可利用性,以及能够减少污染物向下游的迁移.在本研究中,将活性炭添加到受HCHs、DDTs污染的沉积物中,考察了活性炭剂量、粒径以及活性炭与沉积物接触的方式对HCHs、DDTs水相平衡浓度的影响,及对半渗透膜(SPMD)吸...     

Poor efficacy of herbicides in biochar-amended soils as affected by their chemistry and mode of action

We evaluated wheat straw biochar produced at 450 °C for its ability to influence bioavailability and persistence of two commonly used herbicides (atrazine and trifluralin) with different modes of action (photosynthesis versus root tip mitosis inhibitors) in two contrasting soils. The biochar was added to soils at 0%, 0.5% and 1.0% (w/w) and the herbicides were applied to those soil-biochar mixes at nil, half, full, two times, and four times, the recommended dosage (H₄). Annual ryegrass (Lolium rigidum) was grown in biochar amended soils for 1 month. Biochar had a positive impact on ryegrass survival rate and above-ground biomass at most of the application rates, and particularly at H₄. Within any given biochar treatment, increasing herbicide application decreased the survival rate and fresh weight of above-ground biomass. Biomass production across the biochar treatment gradient significantly differed (p < 0.01) and was more pronounced in the case of atrazine than trifluralin. For example, the dose-response analysis showed that in the presence of 1% biochar in soil, the value of GR₅₀ (i.e. the dose required to reduce weed biomass by 50%) for atrazine increased by 3.5 times, whereas it increased only by a factor of 1.6 in the case of trifluralin. The combination of the chemical properties and the mode of action governed the extent of biochar-induced reduction in bioavailability of herbicides. The greater biomass of ryegrass in the soil containing the highest biochar (despite having the highest herbicide residues) demonstrates decreased bioavailability of the chemicals caused by the wheat straw biochar. This work clearly demonstrates decreased efficacy of herbicides in biochar amended soils. The role played by herbicide chemistry and mode of action will have major implications in choosing the appropriate application rates for biochar amended soils.     

我国废橡胶粉用于沥青改性的研究及应用

从道路建设与防水卷材制造两方面,描述了我国废橡胶粉在沥青改性用途中的研究及应用现状。大量国内试验及应用实例表明,与普通石油沥青相比,胶粉改性沥青的针入度、延度、软化点、温度敏感性、稳定性和抗老化性等性能均得到了改善。此外,较之其他种类的沥青改性剂,废橡胶粉成本低,具有环保与资源节约的优点,对我国循环经济的发展具有重要意义。     

An engineering-economic model of pipeline transport of CO2 with application to carbon capture and storage

Carbon dioxide capture and storage (CCS) involves the capture of CO₂ at a large industrial facility, such as a power plant, and its transport to a geological (or other) storage site where CO₂ is sequestered. Previous work has identified pipeline transport of liquid CO₂ as the most economical method of transport for large volumes of CO₂. However, there is little published work on the economics of CO₂ pipeline transport. The objective of this paper is to estimate total cost and the cost per tonne of transporting varying amounts of CO₂ over a range of distances for different regions of the continental United States. An engineering-economic model of pipeline CO₂ transport is developed for this purpose. The model incorporates a probabilistic analysis capability that can be used to quantify the sensitivity of transport cost to variability and uncertainty in the model input parameters. The results of a case study show a pipeline cost of US$ 1.16 per tonne of CO₂ transported for a 100 km pipeline constructed in the Midwest handling 5 million tonnes of CO₂ per year (the approximate output of an 800 MW coal-fired power plant with carbon capture). For the same set of assumptions, the cost of transport is US$ 0.39 per tonne lower in the Central US and US$ 0.20 per tonne higher in the Northeast US. Costs are sensitive to the design capacity of the pipeline and the pipeline length. For example, decreasing the design capacity of the Midwest US pipeline to 2 million tonnes per year increases the cost to US$ 2.23 per tonne of CO₂ for a 100 km pipeline, and US$ 4.06 per tonne CO₂ for a 200 km pipeline. An illustrative probabilistic analysis assigns uncertainty distributions to the pipeline capacity factor, pipeline inlet pressure, capital recovery factor, annual O&M cost, and escalation factors for capital cost components. The result indicates a 90% probability that the cost per tonne of CO₂ is between US$ 1.03 and US$ 2.63 per tonne of CO₂ transported in the Midwest US. In this case, the transport cost is shown to be most sensitive to the pipeline capacity factor and the capital recovery factor. The analytical model elaborated in this paper can be used to estimate pipeline costs for a broad range of potential CCS projects. It can also be used in conjunction with models producing more detailed estimates for specific projects, which requires substantially more information on site-specific factors affecting pipeline routing.     

Non-isothermal flow of carbon dioxide in injection wells during geological storage

During sequestration, carbon dioxide within injection wells is likely to be in a dense state and therefore its weight within the wellbore will play an important role in determining the bottomhole pressure and thus the injection rate. However, the density could vary significantly along the well in response to the variation in pressure and temperature. A numerical procedure is formulated in this paper to evaluate the flow of carbon dioxide and its mixtures in non-isothermal wells. This procedure solves the coupled heat, mass and momentum equations with the various fluid and thermodynamic properties, including the saturation pressure, of the gas mixture calculated using a real gas equation of state. This treatment is particularly useful when dealing with gas mixtures where experimental data on mixture properties are not available and these must be predicted. To test the developed procedure two wellbore flow problems from the literature, involving geothermal gradients and wellbore phase transitions are considered; production of 97% carbon dioxide and injection of superheated steam. While these are not typical carbon dioxide injection problems they provide field observations of wellbore flow processes which encompass the mechanisms of interest for carbon dioxide injection, such as phase transition, temperature and density variations with depth. These two examples show that the developed procedure can offer accurate predictions. In a third application the role of wellbore hydraulics during a hypothetical carbon dioxide injection application is considered. The results obtained illustrate the potential complexity of carbon dioxide wellbore hydraulics for sequestration applications and the significant role it can play in determining the well bottomhole pressure and thus injection rate.     

Forest health conditions in North America

Some of the greatest forest health impacts in North America are caused by invasive forest insects and pathogens (e.g., emerald ash borer and sudden oak death in the US), by severe outbreaks of native pests (e.g., mountain pine beetle in Canada), and fires exacerbated by changing climate. Ozone and N and S pollutants continue to impact the health of forests in several regions of North America. Long-term monitoring of forest health indicators has facilitated the assessment of forest health and sustainability in North America. By linking a nationwide network of forest health plots with the more extensive forest inventory, forest health experts in the US have evaluated current trends for major forest health indicators and developed assessments of future risks. Canada and Mexico currently lack nationwide networks of forest health plots. Development and expansion of these networks is critical to effective assessment of future forest health impacts.