北京城市生态系统的能值动态分析

采用能值理论与分析方法,对北京市1990~2001年间的能值结构动态进行了分析,并采用人均能值、能值密度、生态功能潜力、人口基本承载力、能值自给率、能值货币比率、环境负载率、输入能值比等重要能值指标对该时期北京市城市生态系统的能值状况作了详细分析。研究表明,北京城市生态系统正处于较高发展水平,已基本跨入发达国家水平的行列;但高强度、快速发展给本市带来了巨大的生态环境压力,未来北京的可持续能力建设已势在必行。文章也提出了北京城市生态系统可持续发展能力建设的基本方向。     

Multi-objective-based optimal transmission switching and demand response for managing congestion in hybrid power systems

ABSTRACT

This paper proposes a novel congestion management (CM) approach by using the optimal transmission switching (OTS) and demand response (DR) for a system with conventional thermal generators and renewable energy sources (RESs). In this paper, wind and solar PV units are considered as the RESs. The stochastic behavior of wind and solar PV powers are modeled by using the appropriate probability density functions (PDFs). The proposed CM methodology simultaneously optimizes the generation dispatch, demand response, and also the network topology of the power system. The OTS identifies the branches that should be taken out of service by significantly reducing the operating cost of the system while respecting the system security. Here, the total operating cost minimization/social welfare maximization and system losses minimization are considered as the objectives to be optimized. The proposed CM problem is solved using the multi-objective Jaya algorithm and it is used to determine a set of Pareto-optimal solutions. The Jaya algorithm is simple and it does not have any algorithmic-specific parameters to be tuned. This aspect reduces the designer’s effort in tuning the parameters to arrive at the optimum objective function value. A fuzzy logic-based approach is used to identify the best compromise solution. The effectiveness of the proposed CM approach is examined on modified IEEE 30 and practical Indian 75 bus test systems. The obtained simulation results are analyzed and they show the effectiveness of the proposed approach.     

Investigation of sustainable energy alternatives for powering remote communities in northern Ontario

ABSTRACT

Remote communities in the North of Ontario survive in isolation as their proximity to the southern industrial sector of the province limits their accessibility to the major grid. The lack of grid connection has led to antiquated methods of power generation which pollute the environment and deplete the planet of its natural resources. Aside from the primary means of electricity generation being by diesel generators, generation infrastructure is deteriorating due to age and the stagnation of the power supply has led to communities facing load restrictions. These challenges may be resolved by introducing clean energy alternatives and providing a fuel blend option. The primary energy sources investigated in this research are solar, wind, and hydrogen. To assess the viability of these energy production methods in Northern communities, an exergy analysis is employed as it utilizes both the first and second law of thermodynamics to determine systems’ efficiency and performance in the surroundings. Local weather patterns were used to determine the viability of using wind turbines, solar panels and/or hydrogen fuel cells in a remote community. Through analysis of the resources available at the community, it was determined that the hydrogen fuel cell was best suited to provide clean energy to the community. Wind resulted in low efficiency in the range of 2–3% while solar efficiencies resulted in ranges of 18 – 19%, as the seasonal variations between the three years is not very great. Due to the higher operating efficiencies observed of the PV panels it would also be an attractive alternative to diesel generators however, the lack of consistent operation above 30% efficiency throughout the year, resulted in hydrogen fuel cells being a better alternative.     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

Modeling urban solar energy with high spatiotemporal resolution: A case study in Toronto,Canada

This research presents a method to determine the maximum potential for the capturing of solar radiation on the rooftop of buildings in an urban environment. This involves the modeling of solar energy potential and comparison to historical building energy demand profiles through the use of 3-D solar simulation software tools and geographic information systems (GIS). The objective is to accurately identify the amount of surface area that is suitable for solar photovoltaic (PV) installations and to estimate the hourly PV electricity generation potential of existing building rooftops in an urban environment. This study demonstrates a viable approach for modeling urban solar energy and offers valuable information for electricity distributors, policy makers, and urban energy planners to facilitate the substantial design of a green built environment. The developed methodology is comprised of three main sections: (1) determination of suitable rooftop area, (2) determination of the amount of incident solar radiation available per rooftop, and (3) estimation of hourly solar PV electricity generation potential. A case study was performed using this method for Ryerson University, located in Toronto, Canada. It was found that solar PV could supply up to 19% of the study area’s electricity demands during peak consumption hours. The potential benefits of solar PV was also estimated based upon hourly greenhouse gas emission intensity factors as well as Time-of-Use (TOU) savings through the Ontario Feed-in-Tariff (FIT) program, which allows for better representation of the positive impacts of solar technologies.     

Efficiency enhancement in solar air heaters by modification of absorber plate-a review

This paper outlines a complete review on modifications made on the absorber plate of solar air heaters in order to improve the turbulence and heat transfer rate, thereby efficiency. Corrugated sheets, fins, extended surfaces, wire mesh, porous medium, etc., are a few of the modifications used. Most of such alterations in the absorber plate resulted with an increase in efficiency but associated with drawback of increased pumping power due to raising friction factor. Pumping power is considered here as a predominant comparison parameters of various solar air heaters with different absorber plate in terms of effective efficiency.     

太阳能污泥干化在欧洲的应用

太阳能污泥干化指的是利用太阳能为主要能源对污水处理厂污泥进行干化和稳定化的污泥处理技术。该技术运用太阳能,借助传统温室干燥工艺,具有低温干化、运行费用低廉、操作简单、运行安全稳定、干化后的污泥仍保留原有的农用价值等特点。该文主要介绍了该工艺的工作原理及流程,工艺设计参数及其与传统热干化技术相比的优缺点,并简要介绍了该工艺在欧洲市场上的商业应用。     

基于半经验模型对大面积染料敏化太阳电池性能影响因素的研究

以影响大面积染料敏化太阳电池性能的几个物理参量和几何参量为切入点,分析了内部电阻对电池性能的影响,针对几种构型不同的大面积电池,建立了效率的半经验模型.根据并联、串联、和各单元独立式串并联的大面积电池的相关物理参量和几何参量,对电池效率进行了计算.通过比较计算值与测试值的偏差,分析了半经验模型的适用性.在半经验模型的基础上,分析了相关物理参量和几何参量对电池性能的影响.结果表明,在实际应用中,通过半经验模型分析物理参量和几何参量的影响,可以优化大面积电池的性能.     

太阳光Fenton氧化对含酚废水生物降解影响研究

研究了太阳光Fenton氧化预处理对含酚废水生物降解性的影响及太阳光Fenton氧化-生化法联合工艺对煤气含酚废水的处理效果。结果表明,煤气含酚废水和模拟含酚废水的生物降解性均较差,太阳光Fenton氧化预处理可明显提高含酚废水的生物降解性,随着H2O2投加量的增加,废水的BOD5/COD比值逐渐增大,生物降解性明显增强。煤气含酚废水直接进行生化处理的COD和挥发酚去除率均较低。当太阳光Fenton氧化过程H2O2用量为22.5%理论投加量时,采用太阳光Fenton氧化-生化法联合工艺可使煤气含酚废水的COD由1357mg/L降低至104mg/L,挥发酚由198.2mg/L降低至0.47mg/L,COD和挥发酚均达到国家二级排放标准。     

闽三角城市群自然资本损失评估

在快速城镇化进程中,城市群发展在促进区域经济竞争与合作的同时,也在一定程度上造成人地关系矛盾的加剧,生态系统服务水平下降。为了量化城镇化对自然资本产生的变动,揭示人类资源消耗过程对区域生态系统服务的影响机制,以快速城镇化的典型区域——闽三角城市群为例,运用能值分析方法与GIS技术,分析了2000-2015年闽三角城市群可更新资源时空演变特征,城镇化进程中生态环境价值演变规律以及土地转化过程中的自然资本损失。研究结果表明：（1）闽三角城市群可更新资源在时间上呈波动减小趋势,空间上自沿海区域向内陆区域逐渐升高;（2）高环境质量等级中城镇用地面积占比呈显著增加趋势,由0增加到10.63%,人类活动导致区域生态环境价值的损失逐渐上升;（3）城镇化过程中由于城市空间扩张,使部分自然用地与农业用地转化为城镇用地,转化过程造成的自然资本损失总量为1.27×10²² seJ,货币价值超过6.30×10⁹元。研究有助于完善城镇化影响下的生态环境效应研究,为城市群或区域生态环境管理与修复提供决策参考。