浅谈超低频电磁波异常与相关地震

介绍了锦州东港电力有限公司地震台多年来应用超低频电磁信息探索地震前兆所总结出的异常形态分别与远震、近震、地方震的对应实例,揭示了ＵＬＦ电磁波异常与将要发生地震映震的一些初步规律,说明了电磁波是地震短临预报的好方法。     

对定标用标准紫外辐射光源性能指标的探讨

紫外辐射是模拟环境条件测试的重要组成部分,对紫外辐射强度、剂量等的定标对于老化耐久实验数据的准确性和可靠性具有重要意义。本文通过实验手段对目前常见的定标用紫外标准光源的技术指标进行分析,同时对该类光源的性能指标未来的改进方向进行探讨,并提出了改进设计方案。     

云南近期3次中强震的天文背景

分析了澄江地震至丘北地震间云南发生的3次中强震时的天体位置、地球自转与太阳活动等天文背景,分析结果表明,尽管这3次地震的震级都较小,但都发生在震中所受引潮力变化较大时刻和太阳活动局部下降时段。     

居室放射性

本文介绍了放射性的来源,讨论了室内γ射线和氡及其子体,计算了相关的年剂量当量     

CHEMIFOG_V – A Model to Simulate Radiation Fogs and their Interaction with Vegetation and Chemistry

Radiation fog is an important modifier of atmosphericcompounds in the planetary boundary layer. In vegetated areas effects are especially pronounced due to the enlarged surface area. Besides affectingthe lower boundary of atmospheric models fog acts as amulti-phase reaction chamber leading to acid deposition. Here we present the 1-dimensional radiation fog modelCHEMIFOG_V to simulate regional radiation fogevents. The key feature of the fog model is thedetailed microphysics, where the aerosol/dropletspectrum is describedwith a joint 2-dimensional distribution, but also thedynamics, thermodynamics, and radiative transfer are calculated. Toinvestigate the interaction between fog and the biosphere amulti-layer vegetation module, including a soil module as well as a drydeposition module were coupled. Vegetation influences thedynamics, thermodynamics, and the radiation field of the lowestatmospheric layers. With CHEMIFOG_V, numerical case studieson dry and moist deposition processes on vegetation surfaces wereperformed. Hereby multi-phase chemistry and the processing of aerosolswere considered. The results show that the chemical composition of thedeposited fog droplets is mainly determined by the aerosol composition. Dry deposition fluxes are dependent on the incoming radiation and the leaves' surface conditions with respect to water coverage.Due to chemical aerosol processing and deposition, the aerosol spectrumis significantly modified in the planetary boundary layer.     

北京核与辐射恐怖事件风险分析

采用风险分类-要素分析-风险排序的思路,对北京市核与辐射恐怖事件风险进行分析。根据国际上1998—2006年该类恐怖事件的实例,从事件所涉及的材料、场所角度将核与辐射恐怖事件分为6大类。结合北京市的实际情况进行涉核恐怖事件的要素分析,将北京市各类场所划分为4类敏感区并与5类涉核恐怖事件结合起来,得到北京市核与辐射恐怖事件风险构成图。通过风险分析,笔者认为北京市发生核与辐射恐怖事件风险最大的场所为核研究机构,最容易发生的核与辐射恐怖事件类型为涉及放射源的恐怖事件,结合分析结果对从阻止、探测、响应3个层次上提出了奥运核安保工作的反核恐工作建议。     

某种同位素发生器用于示踪测井项目的辐射水平调查与评价研究

将某种同位素发生器用于示踪测井的贮存、运输、淋洗及现场测井各阶段,通过开展不同阶段放射性水平调查,对调查结果进行剂量估算与现状评价,掌握113Sn-113mIn同位素发生器用于示踪测井过程对环境及人员造成的辐射危害.     

Experimental investigation on effect of an absorber plate covered by a layer of sand on the efficiency of passive solar air collector

A passive flat-plate solar air collector was constructed in the laboratory of New and Renewable Energy in Arid Zones, Ouargla University, South East Algeria. The absorber of the passive flat-plate solar air collector was laminated with a thin layer of local sand. This acted as a thermal packed bed with a collecting area of 0.5 m² (1 m × 0.5 m). Three series of experiments were performed. The first consisted of choosing the best sand brought from three different places of the Algerian desert. The second consisted of studying the effect of the thickness of the sand layer on the daily efficacy of the collector. The influence of the sand diameter was investigated in the third series. The experimental results showed that: All collectors covered with sand had higher efficiency than those without. It was noticed that, for a fixed mass of sand (given thickness of the sand layer), the improvement of the collector was inversely proportional to the sand particle diameters. The maximum efficiency approximates 62.1% for a particle diameter 0.063 mm, compared to 41.71% for a diameter 0.250 mm.The efficiency of the collector for a fixed particle diameter increases with the increase in the thickness of the sand layer. The collector with thickness sand layer 0.84 mm gave the best efficiency of 46.14% compared to 27.8% for 0.28 mm of thickness sand layer.     

Investigation of modified horizontal wing cut twisted tapes fitted with rod and spacer at trailing edge on heat transfer properties in Double Glazing V-Trough solar water heaters

An experimental analysis of heat transfer efficiency in double glazing solar water heating system having full-length Horizontal wing cut twisted tapes having twist ratio 3 fitted with rod or spacer of dimensions 125 mm, 250 mm, and 500 mm as length at the trailing edges has been dealt in this work. The experimental results have been compared with a plain tube with similar operating conditions and concluded that variation in the Nusselt number, as well as friction factor, are ±12.56% and ±10.17%, respectively. The result of empirical correlation concludes that Nusselt number is maximal for horizontal wing cut twisted tapes having rod or spacer at its ends while comparing with full-length horizontal wing cut twisted tapes. The friction factor is low for full-length horizontal wing cut twisted tapes than the horizontal wing cut twisted tapes fitted with rod or spacer. The horizontal wing cut twisted tapes fitted with rod has superior performance than twist fitted with spacer.     

Perceptions towards solar mini‐grid systems in India: A multi‐stakeholder analysis

This study identifies and assesses the perspectives of four key stakeholder groups towards solar minigrids in rural India. The stakeholders considered are policymakers, minigrid developers and operators, development organizations, and national grid representatives. Recent state and national policies in India have increased the focus on minigrids and their services. In this study, stakeholder interviews were employed to identify the attitudes towards the recent electricity policy, the underlying context for minigrid development, the role of minigrids in rural electrification, and the inclusion of minigrid systems within the larger framework of electricity sector policies by the recent government minigrid policies. Results indicate that stakeholders agree that minigrids, as a rural electricity service, are currently viable to complement the national grid due to their high reliability, performance in remote regions, and diminishing cost per unit. However, stakeholders disagree on the future outcomes, with diverging views on the priority of minigrids as an electrification tool in the face of the expanding central grid, the ideal implementation strategy for minigrids, and the potential for grid‐minigrid interaction. Based on stakeholder feedback, the growth of minigrids in India is likely to be constrained by the confidence in recent policies, necessitating more frequent dialogue among decision makers and a solidified relationship to the national electricity grid.