A model of oscillatory transport in granular soils, with application to barometric pumping and earth tides

A simple algebraic model is proposed to estimate the transport of a volatile or soluble chemical caused by oscillatory flow of fluid in a porous medium. The model is applied to the barometric pumping of vapors in the vadose zone, and to the transport of dissolved species by earth tides in an aquifer. In the model, the fluid moves sinusoidally with time in the porosity of the soil. The chemical concentration in the mobile fluid is considered to equilibrate with the concentration in the surrounding matrix according to a characteristic time governed by diffusion, sorption, or other rate processes. The model provides a closed form solution, to which barometric pressure data are applied in an example of pore gas motion in the vadose zone. The model predicts that the additional diffusivity due barometric pumping in an unfractured vadose zone would be comparable to the diffusivity in stagnant pore gas if the equilibration time is 1 day or longer. Water motion due to the M2 lunar tide is examined as an example of oscillatory transport in an aquifer. It is shown that the tidal motion of the water in an aquifer might significantly increase the vertical diffusivity of dissolved species when compared to diffusion in an absolutely stagnant aquifer, but the hydrodynamic dispersivity due to tidal motion or gravitational flow would probably exceed the diffusivity due to oscillatory advection.     

Analysis of heavy metal distribution in superficial estuarine sediments (estuary of Bilbao, Basque Country) by open-focused microwave-assisted extraction and ICP-OES

Open-focused microwave-assisted extraction and ICP-OES determination of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn from surface sediments of the estuary of Bilbao (Basque Country, North of Spain) was carried out. All the samples were collected at three different tributaries of the estuary (Asua, Galindo and Nerbioi-Ibaizabal) every two months during 1999. The digestion procedure was proposed from the conclusions of a fractionated factorial design, and the precision and accuracy of the method was verified using a certified reference sediment (RTC008-050). The results of the analysis were statistically treated by means of principal component analysis and correlation analysis. The principal component analysis of sediment data (32 samples × 9 metals) indicated different patterns of contamination regarding the tributary and sampling station. The two main patterns observed were a steady increment of the metal concentration along all the campaigns in the samples collected in the Galindo River and a seasonal variation in the Nerbioi-Ibaizabal River, with higher metallic content during summertime and lower content during wintertime.     

超临界络合萃取铅的研究进展

本文综述了超临界络合萃取铅的研究进展 ,介绍了几类络合剂 ,以及温度、压力和基质及基质修饰剂等因素对萃取效率的影响。     

The fate of prazosin and levonorgestrel after electrochemical degradation process: Monitoring by-products using LC-TOF/MS

Prazosin (PRZ) and levonorgestrel (LNG) are widely used as an anti-disease drugs due to their biological activity in the human body. The frequent detection of these compounds in water samples requires alternative technologies for the removal of both compounds. After electrochemical degradation of PRZ and LNG, the parent compounds could be completely removed after treatment, but the identification and characterization of by-products are necessary as well. In this study, the effects of NaCl concentration and applied voltage were investigated during the electrochemical degradation process. The results revealed that the increase of NaCl concentration and applied voltage could promote the generation of hypochlorite OCl? and then enhance the degradation of PRZ and LNG. After initial study, 6 V and 0.2 g NaCl were selected for further experiments (96% and 99% removal of PRZ and LNG after 40 min, respectively). Energy consumption was also evaluated and calculated for PRZ and LNG at 3, 6 and 8 V. Solid phase extraction (SPE) method plays an important role in enhancing the detection limit of by-products. Furthermore, characterization and identification of chlorinated and non-chlorinated by-products were conducted using an accurate liquid chromatography-time of flight/mass spectrometry LC-TOF/MS instrument. The monitoring of products during the electrochemical degradation process was performed at 6 V and 0.2 g NaCl in a 50 mL solution. The results indicated that two chlorinated products were formed during the electrochemical process. The toxicity of by-products toward E. coli bacteria was investigated at 37°C and 20 hr incubation time.     

活性污泥高质量RNA快速提取方法研究

通过比较RNA产量、纯度、降解程度、特定基因的扩增能力、微生物多样性等评价指标,考察和探讨了5种不同RNA提取方法对活性污泥总RNA提取效果的影响并最终建立了一种快速、有效的活性污泥RNA提取方法,即在TENP和PBS洗涤沉淀污泥的基础上,分别采用溶菌酶和TRIzol裂解活性污泥细菌、氯仿去除细菌裂解液中的蛋白和大部分DNA、异丙醇沉淀核酸和DNase I水解残留DNA后,最后进一步用离心柱纯化RNA.结果表明,这种方法可以有效提取高质量的菌群RNA,不仅提取的RNA总量多(每g污泥可提取169.6μg RNA)、纯度高、降解程度低、完整性好、具有丰富的生物多样性,而且可同时进行16SrRNA和amoA基因的RT-PCR扩增反应;与其它方法相比,性价比高,具有明显的优越性,适用于活性污泥RNA的大量提取,同时,T-RFLP结果证明RNA提取方法对分析样品的微生物种类和丰度分析结果影响较大,不同的RNA提取方法所获得的微生物群落基因多样性及其种类、丰度均不同.本研究建立了一种快速、有效的高质量RNA提取方法,将在监测活性污泥菌群动态变化、菌群代谢功能学、微生物群落芯片等研究上具有重要意义.     

大水量下快速提取悬浮物的方法研究

针对大量水体中悬浮物的提取,提出了一泵三瓶滤网覆盖抽滤法,该方法是在传统滤膜抽滤法的基础上,在滤膜的下面,增设了一张尼龙滤网,滤网的大小刚好覆盖布氏漏斗的抽滤小孔,并采用一台真空泵带动三个抽滤瓶。实践证明,一泵三瓶滤网覆盖抽滤法的抽滤速度是传统抽滤方法的7倍多,并且能够减少在抽滤过程中由于抽滤时间过长而导致的悬浮物的质量损失。因此,该方法能够大大提高抽滤的效率,缩短抽滤的时间,加快实验的进程,对大范围内的水体监测工作具有重要的现实意义。     

萃取-反萃法综合回收磷矿浮选尾矿中磷和镁

针对某磷矿浮选尾矿的资源特点,将其作为高镁低品位磷矿进行处理,用萃取-反萃法分离酸浸液中的镁和磷。选择正丁醇作为萃取剂,在磷酸浓度为30%、萃取相比为1:1,温度为常温,萃取时间为5min的均衡搅拌条件下,五氧化二磷萃取率可达68%以上;用水作为反萃剂,在其加入量为反萃前有机相体积的30%,反萃时间为3min,常温条件下进行反萃,反萃率可达90%以上。该研究为综合回收磷矿浮选尾矿提供了基础性资料,     

高温水萃取在食品安全快速检测中的应用研究

采用高温水萃取方法对食品中农药残留、甲醛、亚硝酸盐、抗生素等成分进行快速萃取,结合分光光度法、液相色谱等分析方法进行了上述成分的快速检测研究。结果表明,蔬菜中甲胺磷的萃取条件为pH=8.0的磷酸缓冲溶液、萃取温度120℃、萃取时间2～3min;腐竹中甲醛的萃取条件为0.1mLH3PO4溶液/10mL、萃取温度120℃、萃取时间5min;肉制品中亚硝酸盐的萃取条件为5mL硼砂饱和溶液/10mL、萃取温度120℃、萃取时间5min;饲料中四环素的萃取条件为pH=2.0的盐酸溶液、萃取温度100℃、萃取时间4min。与现有的蒸馏、振荡萃取、超声萃取等预处理方法比较,高温水萃取法具有萃取效率高、精密度好、快速、简便和不使用有机溶剂的优点,可以满足实际样品快速检测的需要。     

固相微萃取技术及其在环境样品分析中的应用

在介绍SPME技术装置、工作原理及影响因素的基础上,阐述了近年来SPME技术在环境样品分析中的应用。     

Enzyme extraction by ultrasound from sludge flocs

Enzymes play essential roles in the biological processes of sludge treatment. In this article, the ultrasound method to extract enzymes from sludge flocs was presented. Results showed that using ultrasound method at 20 kHz could extract more types of enzymes than that ultrasound at 40 kHz and ethylenediamine tetraacetic acid (EDTA) methods. The optimum parameters of ultrasound extraction at 20 kHz were duration of 10 min and power of 480 W. Under the condition, ultrasound could break the cells and extract both the extracellular and intercellular enzymes. Ultrasound power was apparently more susceptive to enzyme extraction than duration, suggesting that the control of power during ultrasound extraction was more important than that of duration. The Pearson correlation analysis between enzyme activities and cation contents revealed that the different types of enzymes had distinct cation binding characteristics.