Biodegradable plastic made from soybean products. II. Effects of cross-linking and cellulose incorporation on mechanical properties and water absorption

Soy isolate was treated with formaldehyde and glyoxal at 1.0, 2.5, and 5.0% (w/w isolate) and with adipic and acetic anhydrides. The materials were then compression-molded into plastic tensile bars and tested for tensile and yield strength, percentage elongation, Young's modulus, and water absorption. Treatment with 5% formaldehyde increased the tensile strength significantly, to 4.9 kg/mm², compared with the untreated sample (3.7 kg/mm²). The yield strength increased slightly, to 0.68 kg/mm². Elongation was significantly less after treatment with formaldehyde. Young's modulus increased after treatment and leveled off at 174 kg/mm². Water absorption decreased as the formaldehyde concentration increased. Treatment with either glyoxal or adipic/acetic anhydride had a detrimental effect on the mechanical properties of the plastic specimens. Water absorption was decreased by glyoxal treatment but was not affected by adipic/acetic anhydride treatment. Long-fiber (lf), short-fiber (sf), and microcrystalline (mc) cellulose were incorporated into soy isolate at various levels. Cellulose addition decreased the percentage elongation and increased the rigidity of the plastic. All three cellulose additions increased Young's modulus. The tensile strength increased with the addition of sf-cellulose to soy isolate; lf-cellulose decreased the tensile strength, whereas the incorporation of mc-cellulose did not have a significant effect. The yield strength increased slightly with the addition of sf-cellulose and was less affected by the addition of lf- or mc-cellulose. All three types of cellulose slightly decreased water absorption at ca. 15% content.Journal Paper No. J-15563 of the Iowa Agriculture and Home Economics Experiment Station, Ames; Project No. 2863.     

DOMESTIC WASTEWATER TREATMENT BY PEATLANDS IN A NORTHERN CLIMATE: A WATER QUALITY STUDY1

ABSTRACT: The use of peatlands as the main form of wastewater treatment in a northern climate was studied for the James Bay Energy Society. The Fontanges campsite (70° 17′ 30″ W; 54° 34′ 00″ N) was chosen as the study site. In less than 1.5 km from the point of discharge BOD₅, COD, total hardness, inorganic carbon, orthophosphates, total phosphorus, ammonia and total nitrogen were reduced by at least 90 percent. The peatland treatment system studied is divided into four components, each having a specific function. The first part combines the action of microorganisms and adsorption on peat, thus reducing the organic content while increasing the inorganic constituents. The second part uses peat to adsorb the inorganic elements already present in the wastewater and those produced in the first part of the system. The third component acts as an aerator, increasing the dissolved oxygen and decreasing the BOD₅ levels of the water. The fourth part removes most of the remaining nutrients, thus acting like a tertiary treatment. Overall, peatlands seemed to be effective in treating domestic settled wastewater in a cold climate.     

BIOECONOMIC CONSIDERATIONS FOR WASTEWATER REUSE IN AGRICULTURAL PRODUCTION1

ABSTRACT: Urban wastewater can be a valuable source of water and plant nutrients for agricultural producers, particularly in arid regions. The scientific literature reveals cautious optimism concerning the biological, institutional, and economic viability of irrigating crops with secondary-treated effluent. A derived effluent demand function for agricultural producers near Tucson, Arizona, reveals a potential annual demand of 11,000 acre-feet under present price and proposed delivery system conditions. In this case, wastewater could be exchanged for ground water and both the urban and rural areas would gain.     

SOIL CHANGES CAUSED BY MUNICIPAL WASTEWATER APPLICATIONS IN EASTERN SOUTH DAKOTA1

ABSTRACT: Wastewater from a municipal treatment plant was applied in rapid infiltration basins for four years to determine a poorly drained soils effectiveness in removing influent N and P and the soil changes that might limit their removal. About half the total PO₄-P lost from the influent was sorbed in the upper 91 cm of the soil and the other half was sorbed by the soil below the perforated pipe, which was used to drain the basins and collect the effluent for analysis. Drying of the basin soils converted more sorbed PO₄-P to Ca phosphates but the total sorbed was about the same. The in. fluent N decreased, probably by volatilization, because the two basins with surface soil lost soil N rather than gained soil N. The soil total Ca, Mg, and K contents did not change significantly but Na increased slightly. Changes in the physical characteristics of the soils were slight and would have little effect on the longevity of a rapid infiltration basin.     

AHP法在废水治理工程评价中的应用

应用层次分析法（ＡＨＰ）的原理，建立了废水处理工程的评价模型，并结合废水处理的实例进行了研究，结果证明了ＡＨＰ法是评价废水处理工程的有效方法。     

分级循环—生化法处理煤造气含氰废水

将含有大量悬浮物的洗气箱废水进行初级沉降后，约３／４的废水返回洗气箱用作洗涤水，其余的与洗气塔废水混合进地沉降池去除悬浮物，上清液送至生物滤池进行生化处理去除含氰人合物其他有机物。生化出水经絮凝、澄清后回用于洗气箱和洗气塔实现了废水闭路循环。他     

甲胺磷农药废水生化处理高效菌选育的研究

从用甲胺磷农药废水长期驯化的活污泥中，筛选得到两株降解甲胺磷农药废水中有机磷的高效菌，经鉴定一株为蜡样芽孢杆菌（Ｂａｃｉｌｌｕｓｃｅｒｅｕｓ）。另一株为嗜中温假单胞菌（Ｐｓｅｕｄｏｍｏｎａｓｍｅｓｏｐｈｉｌｉｃａ）。确定了上述高效菌的最适生长条件和降解有机磷的能力，混合高效菌的有机磷去除率达９９．７％。     

Synthesis of cellulose-fatty acid esters for use as biodegradable plastics

Long-chain fatty acid carbohydrate esters (FACE) were synthesized by the acid chloride-pyridine reaction to different degrees of substitution (DS). The hydrolyzed soybean oil was used as the source of unsaturated fatty acids. High molecular weight FACE polymers are insoluble in common solvents, such as benzene, toluene, THF, etc., and are highly water resistant. However, FACE polymers of hydrolyzed cellulose (MW 180 kD) are soluble/swellable in toluene and can be cast into tough, flexible films. FACE polymer properties of tensile strength and clasticity vary with degree of substitution and polymer size.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.     

EC法处理选磷废水的研究

为解决磷矿浮选尾水的污染和回用问题，采用了EC法处理，结果表明，经处理的尾矿水可部分回用，并节省Na2CO3 43-65%，这一处理方法具有一定的实用价值。     

印染废水静电场处理机理分析

本文提出一种利用静电场的印染废水处理方法，印染废水中的污染颗粒在电场的作用下，朝一定的方向迁移，从而发生“强制电中和”作用，这种电中和作用的场能消耗极小，而被中和的污染物颗粒由于凝聚作用，则会不断长大而易于通令过滤去除，这一处理工艺在经“自数”预处理之后，可继续使COD和色度的去除百分数分别达60％和63％以上。